Tender For Height Raising Of 4 (Four) Nos. Of Towers Of 132Kv Barpeta-Nalbari S/C Transmission Line Due To Low Sag
Tender Value
1.39 Crore
Estimated cost
Bid Submission
18 Nov 2026
4 days left
EMD
2.78 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kamrup Metro → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Height Raising Of 4 (Four) Nos. Of Towers Of 132Kv Barpeta-Nalbari S/C Transmission Line Due To Low Sag
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 12-Nov-2026 | Corrigendum-1 | Technical Bid | 18-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Galvanized Lattice steel tower Superstructure(SAE make) |
| 2 | B type (4.524 per, 4 nos) |
| 3 | GI Nuts and Bolts for above |
| 4 | B type (0.2368 per, 4nos) |
| 5 | Galvanized stub sets |
| 6 | B type (0.285 per, 4 nos) |
| 7 | GI Nuts and Bolts for above |
| 8 | B type 4 nos. |
| 9 | Fabrication and supply of 3 meter Extension Body |
| 10 | B type 1no |
| 11 | GI Nuts and Bolts for extension |
| 12 | B type 1 no |
| 13 | Power conductor and accessories |
| 14 | (i)ACSR Panther Conductor |
| 15 | (ii)Stock bridge type vibration damper |
| 16 | (iii) Mid-Span Compression Joint |
| 17 | (iv)Repair Sleeve |
| 18 | Ground wire and accessories |
| 19 | 7/3.15 GI wire |
| 20 | Tension Clamp |
| 21 | Suspension Clamp |
| 22 | Copper Earth Bond |
| 23 | Vibration damper |
| 24 | Insulator and Hardware fittings |
| 25 | Single tension hardware fittings including tension clamp for ACSR Panther complete with all accessories. |
| 26 | Double tension hardware fittings including tension clamp for ACSR Panther complete with all accessories. |
| 27 | 90 KN disc insulators |
| 28 | Tower Line Accessories |
| 29 | (ii)Supply of Danger plate |
| 30 | (iiiSupply of phase plate |
| 31 | (iv)Supply of number plate |
| 32 | (v)Supply of Anti climbing device |
| 33 | Galvanized Lattice steel tower Superstructure(SAE make) |
| 34 | B type (4.524 per, 4 nos) |
| 35 | GI Nuts and Bolts for above |
| 36 | B type (0.2368 per, 4nos) |
| 37 | Galvanized stub sets |
| 38 | B type (0.285 per, 4 nos) |
| 39 | GI Nuts and Bolts for above |
| 40 | B type 4 nos. |
| 41 | Fabrication and supply of 3 meter Extension Body |
| 42 | B type 1no |
| 43 | GI Nuts and Bolts for extension |
| 44 | B type 1 no |
| 45 | Power conductor and accessories |
| 46 | (i)ACSR Panther Conductor |
| 47 | (ii)Stock bridge type vibration damper |
| 48 | (iii) Mid-Span Compression Joint |
| 49 | (iv)Repair Sleeve |
| 50 | Ground wire and accessories |
| 51 | 7/3.15 GI wire |
| 52 | Tension Clamp |
| 53 | Suspension Clamp |
| 54 | Copper Earth Bond |
| 55 | Vibration damper |
| 56 | Insulator and Hardware fittings |
| 57 | Single tension hardware fittings including tension clamp for ACSR Panther complete with all accessories. |
| 58 | Double tension hardware fittings including tension clamp for ACSR Panther complete with all accessories. |
| 59 | 90 KN disc insulators |
| 60 | Tower Line Accessories |
| 61 | (ii)Supply of Danger plate |
| 62 | (iiiSupply of phase plate |
| 63 | (iv)Supply of number plate |
| 64 | (v)Supply of Anti climbing device |
| 65 | Setting of Stub (Sets of four) including transportation and Distribution of Stubs & accessories from store to site excluding cost of excavation, concreting and back filling |
| 66 | (ii) Angle Tower B+0 Type |
| 67 | (ii) Angle Tower B+3 Type |
| 68 | Super structure erection including transportation of structures by any means and distribution of structure and accessories from stores to site excluding fixing of Danger plate, Number plate, Anti-Climbing device, Hoisting of insulators and paintings if any as per direction of site Engineers |
| 69 | (i) Angle Tower B+0 Type (SAE-2 Nos.) |
| 70 | (ii) Angle Tower B+0 Type (1 No.) |
| 71 | (iii)Angle Tower B+3 Type (1 No.) |
| 72 | Stringing of power conductors including transportation from stores and distribution of conductors and accessories to site and laying, stringing, tensioning, clamping, jointing, jumpering and hoisting of insulators complete including cost of all fittings and accessories not specifically mentioned elsewhere per route Km (3 conductors as applicable) of line |
| 73 | Stringing of ground wire including transportation from stores and distribution of conductors and accessories to site and laying, stringing, tensioning, clamping, jointing, complete including cost of all fittings and accessories not specifically mentioned elsewhere per route Km of line |
| 74 | Grounding of Towers with 3 Metre long 25 mm dia GI pipe including cost of all materials such as GI pipes, GI bolts & Nuts and washer, salt, cock etc.as per specification |
| 75 | Painting of Towers with bituminous paints of approved quality up to 3 metres from ground level including the cost of paints. |
| 76 | Erection of Danger plates (1No per tower) |
| 77 | Erection of phase plate (3 nos per tower) |
| 78 | Erection of Number plate(1No per tower) |
| 79 | Erection of anti-climbing device (1 set per tower) |
| 80 | Welding of all nut & bolts up to the bottom cross arm level including all charges of transportation, materials etc. |
| 81 | (ii) B+0 Type |
| 82 | (ii) B+3 Type |
| 83 | Check Survey as per Specification |
| 84 | Construction of RCC foundation |
| 85 | A. Concreting (2 No of Tower x CUM ): Construction of tower foundation of RCC (M20) and PCC (1:3:6) including excavation and backfilling in all types of soil (Dry, Wet, PS & FS), shuttering, shoring, Dewatering, Manual or Mechanised carriage of material to the site, providing all construction materials such as stone chips, sand, cement, all tools and plants, cost of labour and any incidental items deemed necessary for completion of the foundation work as per drawing and specification as directed by AEGCL (for all types of foundation). (Fully submerged type B+0, SAE Type) |
| 86 | B. Reinforcement (2 No of tower x MT): Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more (from Primary producer TATA, Jindal, SAIL, Shyam etc.). (Fully submerged type B+0, SAE Type) |
| 87 | A. Concreting (1 No of Tower x CUM ): Construction of tower foundation of RCC (M20) and PCC (1:3:6) including excavation and backfilling in all types of soil (Dry, Wet, PS & FS), shuttering, shoring, Dewatering, Manual or Mechanised carriage of material to the site, providing all construction materials such as stone chips, sand, cement, all tools and plants, cost of labour and any incidental items deemed necessary for completion of the foundation work as per drawing and specification as directed by AEGCL (for all types of foundation). (Fully submerged type B+0, 1.5m RC) |
| 88 | B. Reinforcement (1 No of tower x MT): Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more (from Primary producer TATA, Jindal, SAIL, Shyam etc.). (Fully submerged type B+0, 1.5m RC) |
| 89 | A. Concreting (1 No of Tower x CUM ): Construction of tower foundation of RCC (M20) and PCC (1:3:6) including excavation and backfilling in all types of soil (Dry, Wet, PS & FS), shuttering, shoring, Dewatering, Manual or Mechanised carriage of material to the site, providing all construction materials such as stone chips, sand, cement, all tools and plants, cost of labour and any incidental items deemed necessary for completion of the foundation work as per drawing and specification as directed by AEGCL (for all types of foundation). (Fully submerged type, B+3) |
| 90 | B. Reinforcement (1 No of tower x MT):Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more (from Primary producer TATA, Jindal, SAIL, Shyam etc.). (Fully submerged type, B+3) |
| 91 | Dismantling |
| 92 | Opening and lowering groundwire from the portion to be dismantled and transportation to the store. |
| 93 | Opening and lowering of the conductor from the portion to be dismantled and transportation to the store |
| 94 | (ERS for 4 locations i.e., 1 ERS per location) |
| 95 | Leveling and preparation of ERS installation site |
| 96 | Sorting and loading of ERS, T&P material on transportation truck (in Kahilipara Store) |
| 97 | Transportation of ERS, T&P materials on truck to site camp and unloading at nearest motorable spot near site camp(ERS towers i.e. 7.7 MT for 160 Kms upto site for 4 locations) |
| 98 | Carrying of ERS materials from unloading site to camp site |
| 99 | Anchoring including excavation for 5 numbers of Anchors |
| 100 | Erection of ERS tower |
| 101 | Dismantling of conductor(3 nos) form existing line of location |
| 102 | Restringing of conductors (3 nos) in ERS tower including re-arrangement of all hardware fitting and accessories. |
| 103 | Re-jumpering of conductors. |
| 104 | Loading and Transportation of T&P materials on truck from site camp to Kahilipara after completion of ERS erection and unloading |
| 105 | Additional Head loading of ERS materials as site is around 1km from motoroable locations |
| 106 | ERS DISMANTLING WORK |
| 107 | Loading & Transportation of T&P materials on truck from Kahilipara Store to site and unloading |
| 108 | Dismantling of Conductors (3 nos) from ERS tower |
| 109 | Dismantling of ERS tower including de-Anchoring |
| 110 | Carrying of ERS, T&P materials from actual site camp site to motorable place where transportation Truck is located |
| 111 | Loading & Transportation of ERS, T&P materials on truck from site to Kahilipara Store and unloading(ERS tower i.e. 7.7 MT for 160Kms upto site for 4 locations) |
| 112 | Additional Head loading of ERS materials as site is around 1km from motoroable locations Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 12, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Nov 18, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 4 daysNov 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender