Tender For Different Minor Works At Kvk Bajaura Under Cskhpkv,Pal Ur (Sh: Renovation Of Office Building And Farmers Hostel, Painting,Distempering And Weather Proof Exterior Emulsion,Water Proofing Of Gutter Including Repair Of Ladies Wash Room Etc.)
Tender Value
4.75 Lakhs
Estimated cost
Bid Submission
06 Nov 2026
4 days left
EMD
9510
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mandi → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Different Minor Works At Kvk Bajaura Under Cskhpkv,Pal Ur (Sh: Renovation Of Office Building And Farmers Hostel, Painting,Distempering And Weather Proof Exterior Emulsion,Water Proofing Of Gutter Including Repair Of Ladies Wash Room Etc.)
BOQ
| Sl. No. | Item Description |
| 1 | Painting one coat (excluding priming coat ) on previously painted steel & other metal surfaces with readymixed paint,brushing oil, grease to give an even shade including cleaning the surface of all dirt,dust and other foreign matter with readymixed paint other than white including entire carriage of material within all leads and lifts. (Nerolac/Asian make 1st quality) |
| 2 | Extra for every subsequent finishing coat of paint with white readymixed paint including entire carriage of material within all lead & lifts.(Nerolac/Asian make 1st quality) |
| 3 | Painting one coat (excluding priming coat)on previously paintedwood and wood based surfaces with readymixed paint brushing to give an even shade including cleaning of all dirt,dust and other foreign matter sand papering and stopping with readymixed paint other then white including entire carriage of materials within leads and lifts. (Nerolac/Asian 1st quality make) |
| 4 | Extra for every subsequent coat of paint with ready mixed paint other than white including entire carriage of material within all leads and lifts. (Nerolac/Asian make 1st quality) |
| 5 | Polishing one coat with french Polish on previosly polished wood and wood based surfaces to give an even surface including cleaning the surface of all dirt,dust and sand papered smooth and including a coat of wood filler including entire carriage of materials within leads and lifts. |
| 6 | Extra for every subsequent coat of polishing including entire carriage of material within all lead & lifts. |
| 7 | Distempering(one coat) with oil bound washable distemper of approved brand and manufature and of required shade,on decorated wall surfaces to give an even shade,after thoroughly brushing the surface clean of all grease,dirt,loose pieces of scales and also including preparing the surface even and sand papered smooth including entire carriage of material within all leads & lifts. (Nerolac/Asian 1st quality make) |
| 8 | Extra for every subsequent coat of distempering with oil bound washable distemper of approved brand and manufacture including entire carriage of material within all leads & lifts.(Nerolac/Asian 1st quality make) |
| 9 | Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete including entire carriage of material within all leads & lifts. |
| 10 | Providing and fixing M.S. grills of required patterns in wooden/steel frames of windows etc. with M.S. Flats, square or round bars with round headed bolts and nuts or by screws. Plain grill including entire carriage of material within all leads and lifts. |
| 11 | Applying priming coat over new steel and other metal surfaces after and including preparing the surface by thoroughly cleaning oil grease dirt and other foreign matter and scoured with wire brushes fine steel wool scrapers and sand peper complete.With ready mixed priming paint brushing red lead,Red-oxide/zinc oxide chrome including entire carriage of material within all leads & lifts. (Nerolac/Asian 1st quality make) |
| 12 | Painting two or more coats on G.I Sheets with readymix paint of approved brand and manufecture on new work to give an even shade white /grey/green shade including entire carriage of material within all leads & lifts. (Nerolac/Asian 1st quality make) |
| 13 | Providing and fixing anodized aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular and other section of approved make conforming to IS-733 and IS-1285 anodised transparent or dyed to required shade according to IS-1858 (Minimum anodic coating of grade AC 15) fixed with rawl plugs and screws or with fixing clips or with expansioin hold fastners including necessary filling up of junctions at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth ,rust free, straight mitred and jointed mechanically where ever required including cleat angle, aluminium snap glazing/paneling, C.P. brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge (aluminium shall be Jindal aluminum of specified sections) including entire carriage of material within all leads & lifts.(Hindalco,Jindal,Indian aluminum make)For doors windows & ventilators & glazed partition frames. |
| 14 | Providing and fixing board partitions with butt jointing & nails (frame work & cover fillets to be measured and paid for seperately) Prelaminated board bwp phenol bonded exterior/interior grade both sides.12mm thick including entire carriage of material within all leads and lifts. |
| 15 | Providing and laying 25 mm cement concrete flooring 1:2:4 (1 cement: 2 sand :4 stone aggregate of size 12.5 mm and below) laid over base concrete and finished with a floating coat of neat cement (base concrete to be paid saparately) including entire carriage of material within all leads & lifts. |
| 16 | Providing and laying 15mm Cement plaster in single coat on the rough side of brick/ concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth.Cement Mortar 1:3 (1Cement:3 Sand) including entire carriage of material within all leads & lifts. |
| 17 | Providing and laying APP (Atactic Polypropylene Polymer) modified prefabicated five layer, 3mm thick water proofing manbrance, black finished reinforced with non woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 ltrs/sqm by the same membrane manufactured of density @ 25ºC, 0.87-0.89 kg/ltr and viscosity 70-160 capacity. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc.and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23ºC as 650/450 N/5cm. Tear strength in longitudinal and transverse direction at 300/250N. Softening point of membrane not less than 150ºC. cold flexibility shall be upto -2ºC when tested in accordance with ASTM, D-5147. The laying of membrane shall be got done through the authorized applicator of the manufacturer of membrane 3mm thick including entire carriage of materials within leads and lift upto all floor levels and heights. |
| 18 | Providing and fixing Steel work welded in built up sections, trusses and framed work,including cutting, hoisting fixing in position and applying a priming coat of red lead paint including entire carriage of material within all leads & lifts.(Tata/Amba/Kamdhenu/Jai Bharat make)In grating framed guard bars,ladders,railing, brackets and similar work. |
| 19 | Providing and fixing M.S. BP sheet 1.66 mm thick in eaves board /facia /soffits/ceiling including cutting, fixing and welding to steel roof members & applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separately) including entire carriage of material within all leads & lifts. |
| 20 | Providing Poly carbonate transparent sheet roofingfixed with G.I.or J. and L hooks,bolts and nuts 8mm.dia metrewith bitumen and G.I. limpet washers filled with white lead complete excluding cost of purlins,rafters and trusses.2 mm thick sheet including entire carriage of material within all leads & lifts. |
| 21 | Providing and fixing 15 cm.wide 45 cm. overall semicircular plain G.I. sheet gutter with iron brackets 40x3mm size bolts and nuts and washers etc. including making necessary conections with rain water pipe complete as per design 0.80mm thick sheet including entire carriage of material within all leads & lifts. |
| 22 | Providing and fixing on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5 kg/sqm including filling the joints with approved adhesive complete 100mm dia pipes including entire carriage of material within all leads & lifts. |
| 23 | Providing and fixing on wall faces PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete PVC Plain bend 100mm dia including entire carriage of material within all lead & lifts. (Finolex/Diplast/ Vectus Make) |
| 24 | Providing and fixing HDHMR bath room vanity wash basin cabinet of popular make with high quality washbasin ,Pillar tap etc.size 24\\"x18\\"x 30\\" with stainless steel legs complete including entire carriage of material within all lead & lifts. |
| 25 | Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete including entire carriage of material within all lead & lifts. (Finolex/Diplast/ Vectus Make)63mm. Type-B 6.0 kg pressure |
| 26 | Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete 63 mm dia including entire carriage of material within all lead & lifts. (Finolex/Diplast/ Vectus Make) |
| 27 | Cutting holes through existing brick work including making good the same in cement mortar 1:6(1cement:6sand) per cms. Depth of cutting: Holes up to and including 400 sq.cms in area including entire carriage of material within all lead & lifts. |
| 28 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)pipes,having thermal stability for hot and cold water supply,including all CPVC plain and brass threaded fittings,including fixing the pipe with clamps at 1.00 mts spacing.This includes jointing of pipes and fittings with one step CPVC solvent cement including testing of joints complete as per the direction of Engineer in Charge including entire carriage of material within all leads, lifts up to all floor level and heights. Consealed work, including cutting chases and making good the walls etc.20 mm Nominal outer dia pipes |
| 29 | Providing and fixing C.P. Brass waste for wash basin or sink 32mm dia including entire carriage of material within all lead & lifts.(Hindware /Nova/ESS ES make) |
| 30 | Providing and fixing 600mm x 450 mm bevelled edge mirror of superior glass mounted on 6mm thick A.C. Sheet or plywood sheet and fixed to wooden plugs with C.P. Brass screws and washers including entire carriage of material within all leads & lifts (Exotia/Modiguard make) |
| 31 | Providing and fixing P.V.C connection with brass unions 300/450mm length 15mm nominal bore of superiour quality including entire carriage of material within all leads & lifts. |
| 32 | Providing and fixing PVC waste pipe for wash basin 32 mm dia complete in all respects including entire carriage of material within all lead & lifts. |
| 33 | Providing and fixing stainless steel Towel rail complete with C.P. Brass brackets fixed to wooden plugs with C.P. Brass screws of superiour quality 600mm x 20mmm of superiour quality including entire carriage of material within all leads & lifts. |
| 34 | Providing and fixing C.P. brass angle valve 15mm without Nuts and pipe ( Hindware contesa/ Jaquar Continental / C-Zar/Nova-Specturm make) including entire carriage of material within all lead & lifts. |
| 35 | Providing and fixing CPVC ball valve with wheel:-Heavy duty complete in all respect including entire carriage of material within all lead & lifts. |
| 36 | Making connection of galvanised steel distribution branch with galvanised mild steel main 20mm to 40mm nominal bore by providing and fixing tee including cutting and threading the pipes complete including entire carriage of material within all leads & lifts. |
| 37 | Providing and fixing stoneware gully trap grade 'A' complete with C.I grating, brick masonry chamber in cement mortar 1:5and water tight C. I. cover with frame of 300mmx300mm size (inside) the weight of cover to be cost less than 4.53kg and frame to be cost less than 2.72kg Square Mouth Traps 100mmx100mm size P type including entire carriage of material within all leads & lifts. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysNov 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender