Tender For annual repair & maintenance of To Lwss Kharahan Khad To Jahoo, Juni, Bani Bassa, Khuni Panoli Koftadhar Stage-I And Stage -Ii In Gp Jahoo, Block Nankhari Distt. Shimla Hp (Sh:- Providing Mccb, Ictp Switches, Ball Bearing, Submersible Panel
Tender Value
5.35 Lakhs
Estimated cost
Bid Submission
06 Nov 2026
8 days left
EMD
10710
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for annual repair & maintenance of To Lwss Kharahan Khad To Jahoo, Juni, Bani Bassa, Khuni Panoli Koftadhar Stage-I And Stage -Ii In Gp Jahoo, Block Nankhari Distt. Shimla Hp (Sh:- Providing Mccb, Ictp Switches, Ball Bearing, Submersible Panel & Ocb Along With Other Allied Accessories).
BOQ
| Sl. No. | Item Description |
| 1 | Supplying of submersible star delta panel of 20 BHP capacity of approved make, such as MEI/Kilburn/L&T/Havels, etc. with voltage monitor relay, holding coil, overload relay and preventers including copper thimble bolts & nuts complete as per the direction and to the entire satisfaction of engineer in-charge. |
| 2 | Providing & fixing MCB/Oil circuit breaker of 400 Amps capacity of reputed make such as Kilburn/L&T/L&K/MEI/Standard make on incoming feeder for motors offered by the tender conforming to BIS 2516-1985 latest with upto date amendments with neutral linked under voltage release in all respect with in all leads & lifts as per the direction and to the entire satisfaction of engineer in-charge. |
| 3 | Providing MCCB of 400 Amps capacity of reputed make such as Kilburn/L&T/L&K/MEI/Standard make on incoming feeder for motors offered by the tender conforming to BIS 2516-1985 latest with upto date amendments with neutral linked under voltage release complete in all respect and as per the entire satisfaction of engineer in-charge. |
| 4 | Providing ICTP main switch of standard/Havell/Siemens/L&T/Kilburn make and having 30% extra operational rating as per IS 4064-1978 with upto date amendments immediately after the power meter of the HPSEBL 400 Amp capacity complete in all respect and as per the entire satisfaction of engineer in-charge. |
| 5 | Providing single phase preventer (VSP 2) for starter of 125 HP capacity complete in all respect and as per the entire satisfaction of engineer in-charge. |
| 6 | Providing under, over voltage controller/protector MNX 110 complete in all respect and as per the entire satisfaction of engineer in-charge. |
| 7 | Providing and fixing HTS full threaded stud, HTS Bolts, HTS gland nuts L-key bolt for disk plate of required size for complete fitting of pump and as per the entire satisfaction of engineer in-charge. |
| 8 | Providing and fixing ball bearing No. NU206 ECJ/C3 SKF including S.S sleeve with lock and washer in all respect and as per the entire satisfaction of engineer in-charge. |
| 9 | Providing and fixing ball bearing No. 6314 C3 SKF including S.S sleeve with lock and washer SKF including S.S sleeve with lock and washer in all respect and as per the entire satisfaction of engineer in-charge. |
| 10 | Providing and fixing ball bearing No. 6310 M/C3 SKF including S.S sleeve with lock and washer complete in all respect and as per the entire satisfaction of engineer in-charge. |
| 11 | Providing and fixing Gland packing 12.5 mm size 500 gm complete in all respect and as per the entire satisfaction of engineer in-charge. |
| 12 | Providing and applying heavy duty grease and as per the entire satisfaction of engineer in-charge. |
| 13 | Providing laying suitable size of 50mm² Copper PVC insulated armoured power cable 3 core confirming to BIS 1554 (Part-1) 1998 or latest with up to date amendments Polycab, Siemens, Gloster, LCCC, L&T, Havells make from meter of HPSEB to OCB to OCB and OCB to bus bar switch and starters including all other electrical equipments, accessories such as thimble, flexible pipe, solder, nuts, bolts, cable gland, etc. complete in all respect and as per the entire satisfaction of engineer in-charge. |
| 14 | Disassembling, reassembling and dynamic balancing including testing of pump and motor at site of work. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysNov 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender