Tender For Repairs And Maintenance To Canal Cross Regulator Radial Gates Of Size 5.5 X 3.5 Mtr. - 03 Nos.,Rope Drum Hoist 10 Mt Capacity By Replacing Old And Damaged Rubber Seal,Wire Rope By New Rubber Seal And Wirerope ,Extension To Hoist Platform C
Tender Value
39.83 Lakhs
Estimated cost
Bid Submission
04 Nov 2026
5 days left
EMD
39900
Bank guarantee accepted
Document Fee
2360
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Beed → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs And Maintenance To Canal Cross Regulator Radial Gates Of Size 5.5 X 3.5 Mtr. - 03 Nos.,Rope Drum Hoist 10 Mt Capacity By Replacing Old And Damaged Rubber Seal,Wire Rope By New Rubber Seal And Wirerope ,Extension To Hoist Platform Complete Job Including Cost Of Material,Labour And Sundry Etc.Of C.R.No.2 At Chainage No.23 Km Of Paithan Right Bank Canal Gate.
BOQ
| Sl. No. | Item Description |
| 1 | Item Description |
| 2 | Dismantling of old damaged side rubber seal from gate leaf of CR 5.5 x3.5 m - 1 No . Supplying, fitting new L type side rubber seal 2 Nos of side length confirming to IS 11855-1986 (Updated) size 90x15x40x18 - 8.40 mtr and G. I. Bolt M-20 x 100 mm with Double Washer and Nut-20 kg and dismantling of old damaged bottom rubber seal from gate leaf of CR 5.5 x3.5 m -1 No. Supplying, fitting new flat type bottom rubber seal 1 No of bottom length confirming to IS 11855-1986 (Updated) size 90x15 mm - 5.70 mtr and G. I. Bolt M-20 x 100 mm with Double Washer and Nut- 12.50 kg , including cost of material, sundry material and labour charges etc. as per drawings, specifications and or instructions of concern in charge |
| 3 | Dismantaling of damaged wire rope, wire rope socket of 10 MT cap hoist -1 No . Fixing new wire rope of Dia 16 mm - 48 Mtr length , confirming to IS 2266. into Wire rope socket - 4 Nos, confirming to IS 2485. by Zinc ( IS 209 ) pouring and carrying load test. Applying Cardium compound (Servocoat 140) - 9 Kg with satisfactory test & Trial, including cost of material, sundry material and labour charges etc as per drawings, specifications and or instructions of concern in charge |
| 4 | Draining of Old Oil from RGB & filling with Gear oil GX-90 - 8 Ltr, Cleaning Gear train by removing old Grease & Applying M.P. Grease grade no. 150 - 10 Kg to Gear train, Pedastal, Drum axle,Trunion pin, Locking box and Lifting bracket pin etc. and refilling of oil of Radial gate of 10 MT cap hoist -1 No., including cost of material, sundry material and labour charges etc as per drawings, specifications and or instructions of concern in charge |
| 5 | Dismantalling and fitting Phosphor Bronze Bush Bearing - 1 No. Complete with cost of material, sundry material and labour charges |
| 6 | Replacement of old and damaged Worm Reduction Gear Box (RGB), Single-Stage, Size O-600, Ratio 60:1, Double-ended Output by providing & fitting new Worm Reduction Gear Box (RGB), Single-Stage, Size O-600, Ratio 60:1, Double-ended Output. Complete job including cost of Material ((Consumable & sundry) and labour charges |
| 7 | Making arrangement for greasing of Trunnion Pin (2 Nos per gate) — grease nipples, bush grease groove, new end cover with central nipple & M.S. grease pipe |
| 8 | Manufacturing With QAP & fabricating Railing on Hoist Bridge End-1 End of 10 T Capacity Rope Drum Hoist for Canal Cross Regulator of size 5.5x3.5 Mtr,Complete work Includes Material,Labour Charges, Machinery & Machining Charges. Rate Analysis for one End. |
| 9 | Manufacturing With QAP & fabricating Railing on Stair case from foot bridge to hoist bridge for Canal Cross Regulator of size 5.5x3.5 Mtr,Complete work Includes Material,Labour Charges, Machinery & Machining Charges. Rate Analysis for one peir. |
| 10 | Providing and applying anticorrosive Coal Tar paint in two coats including surface preparation, chipping the welding, cleaning spatters, dust etc. Complete as directed.after cleaning the surface to satisfaction of Engineer incharge by sand blasting / scraping removing oil, grease, other foreign materials,welding slag,dust etc.including all necessary material ,labour. |
| 11 | Manufacturing, Providing and Erecting Widening (1.0 m U/S + 0.5 m D/S) & Covering of Existing Hoist Platforms with Enclosure & Roof — Deck 7.0 x 2.5 mtr per Gate x1Gates (CR1, Ch.Km.12) |
| 12 | Dismentaling of old Pulley Assembly-1No including gas cutting, Manufacturing & Fabrication of Equilizer Assembly-1 No As per Drawing,of 10 T Capacity rope drum hoist, with 6 mm Fillet Weld,Standard Welding Rod As per AWS E6013, for Canal Cross Regulator Gate of size 5.5x3.5 Mtr,Includes Material,Labour Charges, Machinery & Machining Charges. |
| 13 | Repairs to wall plate of C.R. Gate by Manufacturing With QAP & Fabrication of Curved Seal Plate Patch at Joint of curved Wall Plate with 6 mm Fillet Weld,Standard Welding Rod As per IS 5206/E2313, of Canal Cross Regulator Gate of size 5.5x3.5 Mtr-1No Includes Material,Labour Charges,Machinery & Machining Charge |
| 14 | Manufacturing With QAP & Fabrication of Locking Arrangement-1 No with 6 mm Fillet Weld,Standard Welding Rod As per AWS E6013, of Canal Cross Regulator Gate of size 5.5x3.5 Mtr,Includes Material,Labour Charges,Machinery & Machining Charges. |
| 15 | Replacment of old and damaged line shaft of size 65 mm dia and 2000 mm long by manufacturing & Provinding new line shaft including key way cut & key,stepsa @ end complete job as per drawing ,specification or instructions of concern in charge including cost of material,labour,sundry etc. |
| 16 | Replacement of worn-out Bearing of Gear train pedastal of 10 Ton cap hoist by new one of C.R.Gate of size 5.5x3.5 Mtr-01 nos complete job with cost of sundry material and labour charges. |
| 17 | Transportation , Local Handling by Crane charges for Loading & Unloading of Materials for Motorisation of Hoist at CR 1.as per RA Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysNov 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender