Tender For Piped Water Supply Scheme At Tungi In G.P.Amberpada Tal.Karjat Dist.Raigad
Tender Value
19.42 Lakhs
Estimated cost
Bid Submission
03 Nov 2026
5 days left
EMD
19427
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Raigad → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Piped Water Supply Scheme At Tungi In G.P.Amberpada Tal.Karjat Dist.Raigad
BOQ
| Sl. No. | Item Description |
| 1 | A)Pumping Machinary Item No.1 Providing, erecting and giving test of submersible pump set conforming to IS 8034 and motor conforming to IS 9283,with water proof winding. Pump shall be suitable for various delivery head and discharge with stainless steel shaft.Motor suitable for working on 415 V ± 10%, 3 Ph, 50 Hz A.C. Supply, with cable guard, thrust carbon/fiber bearing to with stand entire hydraulic thrust. The pump set shall be suitable for direct coupling, with suitable suction strainer.Pump should have suitable discharge out let as per manufacturer's design. Antithrust stream lined non return valve shall be provided with the pump. 3 m submersible copper conductor cable in single / double run and 2 pairs of suitable size erection clamp 10 mm thick shall be provided 3.00 HP Pump |
| 2 | Item No.2 Supplying & erecting flate/flexible 3core 10 sqmm submersible cable with copper Conductor,PVC insulated and PVC Sheathed etc. complete. |
| 3 | Item No.3 Providing & fixing Control Pannel board providing & installing & commissioning with test main control pannel board including meter AC 50 cycle 50 volts rang 150mm dia.flush type ammeter 00 to 100 amps rang 150 mm dia. flush type single phase indicating lamps with colour glass of 230/250 V rotary switchces contractor over load relay washer level guard nut push bottom capacitor suitable for above pump set or H.P. and earthing etc.complete |
| 4 | B) Floating Arrangement Item No.1 Providing structural steel work in single stanchions composed of R.S.J. Channel etc. with caps, bases, mild steel plated, angle brackets, cleats, gusset plates, anchor bolts etc. as per detailed designs and drawings or as directed including cutting, fabrication, hoisting, erecting fixing in position, making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it two. coats of oil painting approved quality and shade etc. complete. |
| 5 | Item No.2 Providing and applying epoxy paint primer with middle coat and top coat to plain surfaces including Scaffolding etc.complete |
| 6 | Item No.6 Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 / 14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete. 110mm dia.HDPE Pipe 6 Kg/sqcm |
| 7 | C)Switch Room (2.50 mx2.50) Item No.1 Excavation for foundation / pipe trenches in earth soil including removing the excavated material upto a distace of 50 M and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for etc. complete |
| 8 | Item No.2 Excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge,normal dewatreing, preparing the bed for foundation and excluding backfilling, etc.complete. |
| 9 | Item No.3 Providing and laying in situ cement concrete in M-15 Grade of trap/ granite/ quartzite / gneiss metal for foundation and bedding including dewatering, form work, compacting and curing, finishing etc. complete. |
| 10 | Item No.4 Providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in foundation and plinth of inner walls / in plinth of external walls including bailing out water manually , striking joints on un exposed faces and watering etc.complete. |
| 11 | Item No.5 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete |
| 12 | Item No.6 Providing and casting in situ C.C. of trap / granite/ quartzite / gneiss metal of approved quality for RCC works as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering,form work, compaction, finishing the formed surfaces with C.M.1:3 of sufficient minimum thickness to give as mooth and even surface wherever necessary or roughening if special finish is to be provided and curing, etc. complete. |
| 13 | Item No.7 Providing cement plaster 20mm thick in a two coat in cement mortar 1:4 without neeru finish to concrete or brick surface in all positions including scaffolding, racking out joints,providing groove at joints of brick masonry and concrete members and curing complete. |
| 14 | Item No.8 Filling Plinth & Floors Murrum in trenches with approved murrum from excavated materials from foundation in 15cm to 20cm layers including watering ,compaction etc.complete |
| 15 | Item No.9 Providing and laying cement concrete flooring 40 mm thick wi th M15 cement concrete laid to proper level and slope in alternate bays including compact ion, fi lling joints, marking lines to give the appearance of t i les of 30 cm x 30 cm or other size laid diagonally / square etc finishing smooth (wi th ext ra cement ) in any colour as directed and cur ing etc. complete. With Natural Sand |
| 16 | Item No.10 Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete |
| 17 | Item No.11 Providing and fixing Country cut teak wood double or single leaf second class fully panelled door shutter with 35mm thick style and rail with 25 mm thick panels with openable fan light as per detailed drawings. Excluding the door frame 60mm x 100mm stainless steel fixtures and fastening and finishing the wood work with oil painting 3 coats. (Excluding the door frame) |
| 18 | Item No.12 Providing and fixing Country cut teak wood windows with double leaf 25 mm thick planked shutters without ventilators as per detailed drawings including stainless steel fixtures and fastenings and finishing the wood work with oil painting 3 coats etc. complete |
| 19 | Item No.13 Providing flush grooved Pointing with cm 1:3 to stone masonary including scaffolding & curing etc complete . |
| 20 | Item No.14 Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in three coats including scaffolding, preparing the surfaces. etc. complete. |
| 21 | Item No.15 Providing and Fixing Locking arrangements the standered quality of lock for pump House etc.Complete |
| 22 | Item No.16 Providing and fixing in position steel bar reinforcement of various diameters for RCC piles, caps, footings, foundations, slabs, beams, columns, canopies,staircases,newels,chajjas, lintels,pardies,copings, fins, arches,etc. as per detailed designs, drawings and schedules;including cutting, bending, hooking thebars, bindingwithwires or tackweldingandsupportingasrequired,etc. complete(includingcost of bindingwire) |
| 23 | Sub Estimate:- RISING MAIN Item No.1–Excavation for foundation/ pipe trenches in earth, soils of all types, sand gravel and soft murum, including removing the excavated material upto a distance of 50 meters & lifts as below, stacking & spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. |
| 24 | Item No.2 Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 /14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint /compression fitting joint or flanged joint excluding coupler/ specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete.As per IS:4984-2016, the pipes upto 110 mm dia.should be supplied a)63mm dia.HDPE Pipe 10 kg/sqcm |
| 25 | Item No. 3 :- -Lowering, laying and jointing H.D.P.E. pipes in proper position including all specials by compression fitting/ electrofusion and but fusion jointing procedure including hydraulic testion as per relevant IS code complete with all materials for joining procedure like Electrofusion machine, and all labour as directd by Engineer in charge. . a)63mm dia.HDPE Pipe 10kg/sqcm |
| 26 | Item No.4 Hydraulic testing of H. D. P. E./ M. D. P. E. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position.. positiona)63mm dia.HDPE Pipe 10kg/sqcm |
| 27 | Item No.5:- Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete |
| 28 | Item No.6 Providing and supplying Air Valves as per IS-14845-2000 and MJP’s standard specifications of approved make and quality of following diameters including railway freight, inspection charges, unloading from railway wagons, loading into truck,transportation upto departmental stores,unloding and stacking excluding GST leviedby GOI & GOM in all respect etc. complete.20mm air valve |
| 29 | Item No.7 Lowering, laying and fixing in proper alignment andpositionall typesof C.I. air valves as directed by Engineer-in-charge including cost of conveyance from stores to site of work, cost of all material and giving satisfactory hydraulic testing, etc. complete.(for all class of valves).20mm air valve |
| 30 | Item No.7 Providing and Supplying,lowering laying and jointing ISI Mark CI D/F reflux valves (non-return valve ) following dai. 50mm dia.Non-Return Valve |
| 31 | Item No.9 Providing double flange sluice valve confirming for IS-14846 including worn geararrangements as per tes tpressure,stainlesssteel spindle, caps, including inspectioncharges, transportation upto departmentalstore, unloading, stacking excluding GSTlevied byGOI &GOM in all respect etc.complete.50mm dia.Sluice Valve |
| 32 | Item No.10:- Lowering laying and jointing in position following C.I.D/F Reflux valves Butterfly valves and sluice valves including cost of all labour joining material, including nut bolts and giving satisfactory hydraulictesting etc. complete. (Rate for all class of sluice valves) a) 50mm dia.Sluice Valve & 50mm dia.Reflux Valve-PN-1 |
| 33 | Sub Estimate:- Providing Sintax Tank 10000 litrs with steel plaltform Item No.1–Excavation for foundation/ pipe trenches in earth, soils of all types, sand gravel and soft murum, including removing the excavated material upto a distance of 50 meters & lifts as below, stacking & spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. |
| 34 | Item No.2:- Providing and laying in situ CementConcrete M-15 of trap/granite/quartzite/gneiss metal for foundation and bedding including bailing out water, formwork,compaction, curing, etc. complete |
| 35 | Item No.3 Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity above 1000 to 20,000 litres |
| 36 | Item No.4 Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. |
| 37 | Sub Estimate:- Slow Sand Filter Item No.1–Slow Sand Filter (Single Vessel) |
| 38 | Sub Estimate:- M.S.E.B. Connection Item No.1–M.S.E.B.Connectio |
| 39 | 18% GST |
| 40 | 2% Contingency Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysNov 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender