Tender For special Repair To Fencing Of Fol Gp & Around Bldg No T-267 At Coy Asc (Sup) Type A And Near Bldg. No P-69 & Near Bldg. No P-137 At Jasai Mil Stn.
Tender Value
43.50 Lakhs
Estimated cost
Bid Submission
17 Nov 2026
19 days left
EMD
87000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Barmer → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Fencing Of Fol Gp & Around Bldg No T-267 At Coy Asc (Sup) Type A And Near Bldg. No P-69 & Near Bldg. No P-137 At Jasai Mil Stn.
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement Concrete is ground floors andy pavings n exc 15 cm thickness (below or above ground level), complete all as specified and directed |
| 2 | M&L 100 mm thick cement concrete in foundation, type D-2, 1:4:8 (40mm graded crushed stone aggregate) , filling and mass concrete as specified and directed. |
| 3 | M&L PCC (1:2:4) type B-1 (using 20mm graded stone aggregates) as in coping,benching/ channels of manholes including demolition of existing pcc etc complete all as specified and directed |
| 4 | Demolition of stone / boulder masonry walling built in cement mortar including all quoins arches pillars etc and removal unserviceable materials, debris, rubbish to out side MD land complete all as specified and as directed. |
| 5 | M&L for precast-cement concrete block masonary with solid blocks type D-1 ,1:3:6 (20mm graded aggregates) exc 10 cm in width and setting in CM 1:4 ,complete all as specified and directed |
| 6 | M&L for 10 mm rendering in CM 1:4 on fair face of block masonary wall or on concrete surfaces finished even and fair with complete all as specified and directed. |
| 7 | Dismantling of posts or struts (wood, steel or RCC) any section embadded in concrete, including taking out embedded portion and making good disturbed ground complete all as specified and as directed. |
| 8 | Dismantling fencing wire mesh, any type complete all as specified and as directed. |
| 9 | Supply only chain link MS galvanized fencing size or type all as specified by Engr-in-charge. |
| 10 | Fixing only chain link fencing including line wires any mesh size and type of standard rails complete all as specified and as directed. |
| 11 | S&F Mild steel in flat, round or square bars, in available lengths, Fe 290 (Gde E-165) complete all as specified and as directed. |
| 12 | M&L mild steel screw bolts (machine Made) with hexagonal or square heads at one end and screwed the other to be fitted with washer and one hexagonal or square nut exc 15cm and n exc 22.5cm long, dia of neck 11-15 mm complete all as specified and as directed. |
| 13 | S & F mild steel work as in angle iron , Tee etc as in posts & strut in fencing including cutting tops to shape, drilling holes notching for wire etc flat iron fillets for securing wire mess etc including all necessary drilling, bolting or riveting etc and similar works conforming to Fe-410-0 or Fe-310-0 (Make Tara or equivilant) |
| 14 | S&F in repair galvanized 2 strand steel barbed wire 2.00mm dia barbed with 2mm dia barbs at 75mm spacing & straining & fixing to any type of standards rails straining bolts including securing or tying at crossing with & provn of galvanized mild steel wire complete all as specified and as directed. |
| 15 | M&L for preparing new plastered surface of wall and applying Two or more coats of 100% Premium acrylic emulsion paint of required shade as camouflage / ordinary pattern, on external walls/RCC surfaces/soffits of chajjas/roof projection/cantilivers/balcony etc having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm, including necessary scaffolding arrangement as required at site complete all as specified and-as-directed. |
| 16 | M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces including prepration of new steel surfaces of any description over 10cm girth or width complete all as specified and as directed. |
| 17 | Dismantling structural steel work including doors, gates but excluding framed trusses complete all as specified and as directed. |
| 18 | S&F framed work as in gate etc of angle,tubular or other section with gusset plates, braces etc complete drilled for fixing of steel sheeting or other covering prepared for hanging or sliding with and including either hooks & hinges for steel hanging door fitings complete all as specified and as directed. |
| 19 | S&F in repair 110mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on trenches or in floors /wall complete all as specified and as directed. |
| 20 | Demolition of cement concrete (reinforeced) in floors and paving n.exc 15cm thickness (above or below ground level) complete all as specified and directed. |
| 21 | M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips |
| 22 | M&L for Formwork for flat finished surfaces to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) |
| 23 | M&L form work to edges of concrete flates ,treads break in floors ,window cills ,concrete railings , openings in concrete walls, floor and roofs n exc 20 cm wide and sisides of RCC/PCC bands in walls, horizontal or sloping and ssimilar work exc 10 cm but n. exc 20 cm wide rough finished surface of concrete |
| 24 | M&L for Reinforced cement concrete (Nominal mix )M-25 in Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysNov 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender