Defence Statutory Bodies & Commissions/Committees Closing in 1 days TDR #58238236

Tender For Special Repair To Certain Buildings (Or Living) ,Toilet Block And Bathroom Block At Rayang Mil Stn

Issued by Statutory Bodies & Commissions/Committees · East Siang, Arunachal Pradesh
Tender Value
43.27 Lakhs
Estimated cost
Bid Submission
17 Nov 2026
1 days left
EMD
85540
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
East Siang → Arunachal Pradesh
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Special Repair To Certain Buildings (Or Living) ,Toilet Block And Bathroom Block At Rayang Mil Stn

BOQ

Name of Work:- SPECIAL REPAIR TO CERTAIN BUILDINGS (OR LIVING) ,TOILET BLOCK AND BATHROOM BLOCK AT RAYANG MIL STN
Sl. No. Item Description
1Demolition of cement concrete (unreinfoced) in ground floor,paving nexc 15mm thick(below or above GL) complete all as specified and directed
2Demolition of brick work or stone masonry built in cement mortar including all quoins, pillars, arches etc. complete all as specified and as directed.
3Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises. complete all as specified and as directed
4M&L 25mm thick cement concrete as in Sub-base in cement concrete type B0 1:2:4 using 12.5mm graded stone aggregate as in floor, finished fair and even (toilet & bathroom sunken portion) or any where as required, complete all as specified and as directed.
5S&F Non - skid coloured ceramic tiles of size 7 to 8mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in floors, skirtings etc set and jointed in neat cement slurry and pointed in white or coloured cemert to match including screed bed or bedding layers of mortar 15mm thick for laying floor finishes in CM 1:4 complete all as specified and as directed.
6M&L for coloured non-skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and including screed bed or bedding layer of 15mm thick in CM (1:4) , complete all as specified and directed .
7M&L for 75mm thick plain cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate as in plinth protection finished even and smooth without using extra cement complete all as specified and directed .
8Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
9S&F mild steel rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails , fixed with angle cleats or other connecting plates, gusset plates, etc conforming to Gde Fe-410-W (Gde E- 250) quality 'B' complete all as specified & directed.
10M&L PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation, filling, mass concrete complete all as specified
11S&F rolled MS anlgles/joists/girders (Fe-290 gde E-165) as in staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc complete all as specified and directed.
12M&L preparation of new or previously untreated steel surfaces exc 10 cm width or girth and applying two coat of synthetic enameled paint over one coatof red oxide primer complete all as specified and directed.
13Dismantling plain or corrugated steel sheeting, any gauge, thickness, incl nanital or similar pattern roof covering.complete all as specified and as directed
14S&F for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
15S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/ridges/cladding to wall, fixed with self tapping screws/Aluminium screws complete all as specified and directed.
16Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets. complete all as specified and as directed
17M&L for 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Alumi nium framework with screws and S & F of Anodised aluminium snap grid frame work of size 605 x 605 mm in Ceiling, all as per specification and drawing of MES Schedule for false ceiling including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specifiedall as specified
18Taking down chowkats or frames with shutters (without taking off shutters from the frame) area exc. 1.50sqm & not exc 4.00 sqm each and removing from site complete all as specified and directed.
19Taking down chowkats or frames with shutters (without taking off shutters from the frame) area not exc. 1.5 sq. m each each and removing from site complete all as specified and directed.
20Taking down Shutters of any description exc 1 sq. M and n exc 2 sqm each and removing from site complete all as specified and directed.
21Factory made single extruded WPC (Wood Plastic Composite) solid plain flush door shutter of 25 mm size calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately)complete as specified by the manufacturer and as per directions of Engineer- in-charge. (For W.C. and bathroom door shutter).
22S&F 35mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type with both faces are covered with decorative face veneer with lipping/frame to match, all as specified & directed by Engr-in-Charge.
23M&L mild steel work in framed work to Door Chowkats (angle in any section as desired),grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors and similar work conforming to Fe 290 Gde E-165.complete all as specified and as directed
24S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handle 2 nos in each door hinges anodised aluminium snap beading, screws, side locks etc. complete all as specified and as directed
25S&F-in-repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as dpecified and as directed.
26S&F Anodised aluminium frame for doors, windows, ventilators with one or more rebates, shutters etc including joining cleat for fixing etc. complete all as specified
27S&F of 4.00mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as directed.
28S&F of 4.00mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as directed.
29S&F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, side locks etc. complete all as specified and as directed
30S&F aluminium handles, cast type, anodised of size 150 mm all as specified & directed.
31S&F Aluminium anodised, barrel tower bolts of extruded section 200 long complete all as specified and directed .
32S&F aluminium alloy, anodised, sliding door bolt 300mm long with hasp, stapple (bolt type) and fixing clips of sheet, cast or extruded sections complete all as specified and directed .
33S&F 100mm size, mild steel butt hinges, medium weight cold rolled complete all as specified and as directed.
34M&L for applying two coats of synthetic enamel paint over a coat of pink primer on new or previously untreated wooden surfaces exc 10cm girth or girth incl preparation of new wooden surfaces complete all as specified and directed.
35S&F in repair vitreous China squatting pan 'Orissa' pattern of size 580mmx440mm white with integral foot rest (excluding flushing cistern) but including PVC (SWR) 'P' trap set in and including lime concrete complete all as specified and directed
36S&F for Vitreous china EWC (P trap) , white in colour with & including PVC seat cover , CP or aluminised hinging device (excluding flushing cisten & flush pipe) complete all as specified and directed by Engr-in-Charge.
37S & F in repairs health faucet (CP Brass head) with 1.5m tube and hook complete all as specified and as directed
38S&F in repair PVC valveless, syphonic action type, flushing cistern of 10 litres capacity, low level, white, with inlet ball valve, float and handle including waste pipe and brackets complete all as specified and as directed
39S & F in repairs tubular towel rail brass chromium plated, 20mm dia, D type 60 cm long between flanges.complete all as specified and directed
40S & F in repair Soap Dish , Vitreous China White approximate size 160 x 160x 90mm, embedded in walls/fixed to plugs with chormium plated brass screws complete all as specifed and directed
41S & F in repairs Brass chromium plated shower rose 125mm size swivel type complete all as specified and directed.
42S & F in repairs glass corner shelf, one set comprises of three pieces of corner shelf fancy type (small to large) 250 x 250mm, 200 x 200mm, 150 x 150mm) with all fittings,complete all as specified.
43S&F in repairs PVC (SWR) floor trap 75mm dia, plain with grating including jointing with solvent cement.
44S&F in repair PVC connections 15 mm size with PTMT nuts of length 450mm long.
45S&F in repairs 15mm bore Stop cock/angle cock fancy type, cast copper alloy, chromium plated with crutch or butterfly handles, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
46S&F in repairs rotational moulded polyethylene water storage tanks of 1000 ltr capacity double layers (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.
47S&F in repairs 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe 20 mm dia (minimum weight - 210 gm) complete all as specified and directed.
48S&F in repair gun metal globe or gate valve 20mm bore with iron wheel head, screwed both ends for iron pipes complete all as specified and directed.
49S&Fin repair 15 mm Bib taps, chromium plated fancy typewith crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified.
50Taking down old steel tubing/PPR tubing & connection for 15/20mm bore pipe complete all as specified and as directed.
51Supply, laying, connection and testing, 20 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed.
52Taking down old steel tubing/PP-R pipes & connection including cleaning for refixing for 20/25mm bore pipe complete all as specified and as directed.
53Supply, laying, connection and testing, 25 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed.
54S&F 110 mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints, jointed with solvent laid in trenches or in floors complete all as specified and directed.
55S&F for 110mm bore door type PVC (SWR) bends any radius complete all as specified and directed
56S&F 110mm PVC (SWR) junction single, (Single T) equal or unequalcomplete all as specified and as directed.
57S&F in repairs 110 mm bore PVC (SWR) vent cowl complete all as specified and directed.
58M&L precast cement concrete block masonry with solid block, type C-1,1:3:6 mix ( using 20mm graded aggregate), exc 10cm in width and setting in cement mortar 1:6 complete all as specified and directed.
59Taking down cement or cement lime plaster of any discription on bricks or stone walls/ceiling etc including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed.
60M&L rendering 15mm thick on fair faces of brick work or concrete surfaces in cm 1:6, complete all as specified and as directed
61M&L for preparation of new plastered surfaces of wall and appling two coats cement base paint complete all as specified and as directed
62S&F in repair Stainless Steel Curtain Rail/ Rod having 20mm Outer dia and 1.0mm Wall thickness including Brackets, Side Holders and Rings, etc. and Fixed-in-repairs, complete all as specified and as directed.NOTE :- (a) Stainless Steel Decorative Finials and Stainless Steel Brackets will be provided for Each Length of Curtain Rail/ Rod and Cost of the same will deemed to be included in the Quoted Unit Rate.(b) Only Length of Curtain Rail/ Rod will be Measured for Payment.
63Demolition/dismantling of stone slabs/paver blocks and tiles of any description or thickness laid bedded and pointed in any mortar in floors, approns etc. and clean the surface to receive screed bed to lay new tiles Complete all as specified and directed.
64M&L for 75 mm thick cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base for receiving floor finishes.complete all as specified and as directed Please Enable Macros to View BoQ information
65M&L for 75 mm thick cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base for receiving floor finishes.complete all as specified and as directed Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58238236
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 43.27 Lakhs
LAST DATE 17-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Special Repair To Certain Buildings (Or Living) ,Toilet Block And Bathroom Block At Rayang Mil Stn
Basic Detail
Tender No 83113/E8
Bidding Type Tender
Location
City East Siang
State Arunachal Pradesh
Key Dates
Publish Date 27 Oct 2026
Submission Date 17 Nov 2026
Open Date 19 Nov 2026
Finance
Tender Value 43.27 Lakhs
Tender Fee 500
EMD 85540
Exemption Available
Document List
11e3dbeb-ac76-462a-9929-852ab9a740e0.html
BOQ_892676.xls
Tenderdocument83113.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Oct 27, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 17, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 1 day
Nov 19, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 3 days

Tender Documents

Download All (ZIP) ↓
html

11e3dbeb-ac76-462a-9929-852ab9a740e0.html

xls

BOQ_892676.xls

pdf

Tenderdocument83113.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender