Tender For Provn Of Training Shed Near Hq Db Area And Special Repairs To Bldg No. Viii/03 (Partly) Asri Office Under Ge Chennai
Tender Value
14.40 Lakhs
Estimated cost
Bid Submission
17 Nov 2026
0 days left
EMD
28800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chennai → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Training Shed Near Hq Db Area And Special Repairs To Bldg No. Viii/03 (Partly) Asri Office Under Ge Chennai
BOQ
| Sl. No. | Item Description |
| 1 | Surface dressing n,exc 15cm deep and averaging 15cm deep & getting out in soft & loose soil complete all as specfied and directed. |
| 2 | Excavation in trenches not exc 1.5m wide and n,exc 1.5m in depth,etc and getting out Soft/loose soil for foundation etc., n exc 10 sqm on plan complete all as specifed and directed. |
| 3 | Excavation in trenches not exc 1.5m wide and exc 1.5m in depth and not exceeding 3.00m depth and getting out Soft/loose soil for foundation etc., n exc 10 sqm on plan complete all as specifed and directed. |
| 4 | M&L PCC 1:4:8 type D2 ( 40 mm graded aggreage ) as in foundation filling and mass concrete complete all as specified and as directed. |
| 5 | M&L Mild steel TMT bar of 10mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.9mm dia or securing clips complete all as specifed and as directed. |
| 6 | All as per item no.5 above,but 5mm dia and over upto and including 10mm dia in stirrups, spacer and binder complete all as specifed and as directed. |
| 7 | M&L for reinforced cement concrete design mix M-30 using 20mm graded aggregates for rafts,footings ,foundation beams , plinth beams,base for columns etc and mass concrete complete all as specifed and directed. |
| 8 | M&L for reinforced cement concrete design mix M-30 using 20mm graded aggregates as in columns, pillars, piers, post and struts complete all as specified and directed. |
| 9 | M&L for reinforced cement concrete design mix M-30 using 20mm graded aggregates in chajjas complete all as specified and directed. |
| 10 | M&L for reinforced cement concrete design mix M-30 using 20mm graded aggregates as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. |
| 11 | Use and waste of formwork to sides of concrete foundations, footing ,bases of columns, raft and raft beams, sides and soffits if any of foundation and plinth beams and similar work; vertical to batter make rough finished surfaces complete all as specifed and as directed. |
| 12 | Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions and similar work; make rough finished surfaces complete all as specifed and as directed. |
| 13 | Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc, also splays between floors and beams; make rough finished surfaces complete all as specifed and as directed. |
| 14 | Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floors and roofs n exc 20cm wide sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and as directed. |
| 15 | Use and waste of formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and as directed. |
| 16 | Returning filling including Spreading and leveling with excavated earth including watering removing in layers n,exc 25cm thick complete all as specified and directed. |
| 17 | Removing excavated material n. exc 50m and depositing where directed at a level n.exc. 1.5m above the starting point complete all as specified and all as specified. |
| 18 | Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work and disposal outside MD land complete all as specified and directed. |
| 19 | M&L for flyash brick work with old size bricks straight or curved on plan exc 6M mean radius built in CM 1:6 complete all as specified and directed. |
| 20 | Demolition of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, includingcover fillets complete all as specified and directed. |
| 21 | M & L for galvanised powder coated snap grid framework of size 605 x 605mm for false ceiling all as specified including vinyl laminated MPL gypsum panels ( GYPTECH) 9mm thick of size 60 x 60 cm fixing with staples on snap grid by means of GI wires not less than 4mm dia hooks and raw plug etc centre of make. GYPTECH /ARMSTRONG or equivalent complete all as specified and directed. |
| 22 | S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed. |
| 23 | S&F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specification and drawing inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed. |
| 24 | Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubbing down with water etc, and removing unserviceable material outside cantt area, complete all as specified and directed. |
| 25 | M & L for 15 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces finished the surfaces even and smooth without using extra cement complete all as specified and directed. |
| 26 | M & L for 10 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces finished the surfaces even and smooth without using extra cement complete all as specified and directed. |
| 27 | M & L for 15 mm thick rendering on fair faces of brick work or concrete surfaces of walls etc 10 mm thick im CM 1:6 and 5 mm thick in CM 1:4 mixed with water proofing compound as per manufacturers instruction & finished the surfaces even and smooth without using extra cement, complete all as specified and directed. note : WPC WILL BE MEASURED AND PAID SEPERATELY |
| 28 | Supply only Liquid water proofing compoud |
| 29 | M&L for rendering 5 mm thick using CM (1:3) on ceiling surfaces in patches finished the surfaces even and smooth without using extra cement complete all as specified and as directed. |
| 30 | Dubbing out average 15mm thick on irregular face of walls in patches in CM (1:4) complete all as specified and directed. |
| 31 | M & L for Preparation of new plastered surfaces of wall and applying plaster of paris putty of 1 mm thickness over newly plastered surface to prepare the surface even and smooth and applying two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification complete all as specified and directed. |
| 32 | M & L for Complete removal of existing treatment and applying plaster of paris putty of 1 mm thickness over newly plastered surface to prepare the surface even and smooth and applying two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification complete all as specified and directed. |
| 33 | Material and labour for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489-2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces complete including preparation of new plastered surfaces of walls complete all as specified and as directed. |
| 34 | Material and labour for Complete removal of existing treatment and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489-2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces complete including preparation of new plastered surfaces of walls complete all as specified and as directed. |
| 35 | M&L for preparation of newly plastered surfaces on ceiling and applying three coat of white wash all as specified and directed. |
| 36 | M & L for preparation of old decorated plastered surfaces of ceiling and applying two coats of white wash all as specified and as directed. |
| 37 | Dismantling floor hearth or wall tiling including cement mortar bedding(but not backing) and rubbish off the premises complete all as specified and as directed. |
| 38 | M&L for Vitrified Ceramic light coloured tiles in Patches of 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour and pattern of the tile as approved over and including 15 mm thick screed bed in Cement mortar 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. |
| 39 | Ditto all as item No.38 above but on vertical surfaces such as skirting, dados and risers to step etc.but providing 10mm rendering on wall in CM 1:3 complete all as specified and as directed. |
| 40 | M & L for non skid coloured ceramic concept tiles design 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exc 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:4 complete all as specified and as directed. |
| 41 | M & L for glazed ceramic concept designer coloured tiles in vertical surface 300x250x7mm/450x350x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match including Rendering 10mm thick in CM 1:4 for receiving wall tiles on fair faces of brick work or concrete surfaces finished fair and even complete all as specified and as directed. |
| 42 | M & L for 25 mm thick, plain cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in sub base complete all as specified and directed. |
| 43 | M & L for 25 mm thick, plain cement concrete 1:2:4, type B-0 (using 12.5mm graded crushed stone aggregate) as in sub base complete all as specified and directed. |
| 44 | M & L for 100 mm thick, plain cement concrete 1:4:8, type D-2 (using 40mm graded crushed stone aggregate) as in sub base complete all as specified and directed. |
| 45 | Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area not exc.1.5 sqm each all as specified and as directed by the Engineer-in-Charge. |
| 46 | Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area exc.1.5 sqm but not exc 4sqm each including separating guard bars/grills/wire mesh etc., all as specified and as directed by the Engineer-in-Charge. |
| 47 | M&L for Second class Hard wood, plain solid straight chowkats and frames rebated on the solid, rounded or chamfered put together with glue pinned at joints, supplied and fitted complete all as specified and as directed. |
| 48 | S&F 2nd class hard wood panelled shutters 35mm thick, plain framed (any no of panels) with panels of timber flat on both sides (feather edged) or 12mm veneered particle board commercial veneering on both faces, the size of rail and stile as per IS :1003 (Part-I), kiln seasoned and chemically treated and fitted to chowkats complete all as specified and as directed. |
| 49 | S&F Plain framed, panelled shutter 35mm thick (two panel) with lock rail & panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. 2nd Class HW rail & style of size as per IS: 1003 (Part I), kiln seasoned & chemically pressure treated complete all as specified and as directed. |
| 50 | M&L for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook & pintle hinges; large hasps & staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way & three way straps,plate washers & similar small articles conforming to Fe290-0 Gde E-165 complete all as specified and as directed. |
| 51 | S&F Butt hinges, 100mm size medium weight cold rolled mild steel etc.,complete all as specified and as directed. |
| 52 | S&F Aluminium anodised barrel tower bolts of extruded section 200mm long all as specified. |
| 53 | S&F Extruded aluminium alloy handles, fabricated type,anodised 150 mm size complete all as specified and directed. |
| 54 | S & F aluminium handles cast type anodised 150 mm size complete all as specified and as directed. |
| 55 | S& F aluminium alloy, anodised sliding door bolts 300mm long with hasp and stable (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections complete all as specified and as directed. |
| 56 | S & F 140 mm over all length of cover plates floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor complete all as specified and as directed. . |
| 57 | M & L for applying two coat of synthetic enamel paint over a coat of pink primer including preparation of new wood surfaces of any description not otherwise described over 10 Cm girth or width complete all as specified and as directed. |
| 58 | M & L for applying one coat of synthetic enamelled paint including preparation of old treated wood surfaces of any description not otherwise described over 10 Cm girth or width all as specified and as directed. |
| 59 | S & F aluminium powder coated sliding window 3 track using aluminium section weighing not less than 0.900 Kg per RM for frame and 0.48 Kg per RM for sliding shutters including aluminium anodised snap beads, screws and fixed along with same section in three rolling sliding shutters two for fully glazed with 4mm thick tinted glass fixed with glazing clips, and one for aluminium wire mesh shutters) etc (The rate is inclusive of all fixings of builders hard ware such as wirmesh, hinges, bow handles, locking arrangements etc complete all as specified and as directed. |
| 60 | S & F aluminium powder coated sliding window using aluminium section weighing not less than 0.495 Kg per RM for frame and 0.48 Kg per RM for sliding shutters including fixed with sash bars aluminium anodised snap beads, screws and fixed along with same section in three rolling sliding shutters two for fully glazed with 5mm thick tinted glass fixed with glazing clips, and one for wire mesh shutters) etc (The rate is inclusive of all fixings of builders hard ware such as wire mesh hinges, bow handles, locking arrangements etc complete all as complete all as specified and as directed. |
| 61 | S&F aluminium powder coated ventilators using alumimium section weighing not less than 0.48 Kg per RM for frame louvers aluminium anodised snap beads, screws and fixed alongwith with 4mm thick frost/pin headed glass fixed with glazing clips, and one for wiremesh shutter fixed on frame etc (The rate is inclusive of all fixings of builders hard ware such as wirmesh, hinges, bow handles, locking arrangements etc complete all as directed by Engr-in-Charge. |
| 62 | S&F aluminium anodised powder coated (Minimum thickness of powder coating 50 micron) frame for doors/windows/ ventilator/partition, glazing clips with one or more rebates including joining cleats fot fixing complete all as directed by Engr-in-Charge. |
| 63 | S&F Anodised aluminium door shutters powder coating of any colour (Thickness of powder coating not less than 50 micron), aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised alumnium snap beading, screws etc. complete all as specified |
| 64 | S&F Solid PVC door frame of size 50mmx47mm made out of 5mm thick plain colour PVC sheet reinforced with 19mm MS square tube of 19 gauge metred cut at two corners and joined by inserting two Nos of 150mm long brackets of 15mm x 15mm MS square tube inside the 19mm x 19mm square tube fixed to wall in repairs by drilling 100mm long MS screws using PVC fastener all as per specification complete all as specified and directed. |
| 65 | S&F Factory made solid PVC moulded door shutter with wood free EPS 28 to 30mm thick with 2,4,6 raised panel design with 2mm thick moulded Prelam PVC sheet on the front face & 2mm prelam PVC sheet on back face, supplying and fixing in frame at site complete all as specified and as directed. |
| 66 | S & F 12 mm thick Prelaminated Particle board interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to aluminium/ timber frame work complete all as specified and as directed. |
| 67 | S&F Sheet glass 5.5mm thick, plain ordinary quality & glazing with oil putty in square not exc 0.5 sq.m in each pane fixing to aluminium frame work (any thickness, size, quality or description ) from Aluminium section fixed with beads/glazing clips including hacking out complete all as specified and directed. |
| 68 | S & F in repairs Aluminium (Die cast ) body door closer hydraulically regulated, designation No.2 universal type, suitable for door shutters up to 701mm to 850 mm in width and of weight between 36 to 60 kg complete all as specified and directed. |
| 69 | M& L in repairs Brass mortice lock vertical type size 100 mm 4 leavers with stainless steel handle set suitable for right or left, inside or out side opening doors complete all as specified and as directed. |
| 70 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 71 | M&L for Rolled sections Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. Fe-410- W(Gde- E-250) quality- B(cut to ordinary lengths i.e. Within 20mm of the length indicated) complete all as specified and as directed. |
| 72 | S&F Steel work FE-410 in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed. |
| 73 | M&L for Plates (plain or chequered)channels, square cut or notched(ordinary and counter sunk)forming holes, without any attachment confirming to Fe 410 - W (Grade E-250 Quality -B ) complete all as specified and as directed. |
| 74 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 75 | S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 76 | S&F pre- painted galvalume aluminum zinc coating GI based PUF corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 77 | M & L for Applying two coats of synthetic enamelled paint over a coat of red oxide on steel or iron surface based materials of any description , not other wise described over 10 cm width or girth including preparation of new surfaces complete all as specified and directed. |
| 78 | M & L for Applying two coats of synthetic enamelled paint on steel or iron surface based materials of any description , not other wise described over 10 cm width or girth including preparation of old surfaces complete all as specified and directed. |
| 79 | M&L for preparation of newly plastered wall surfaces of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer finishing the surface even and smooth complete all as specified and as directed. |
| 80 | M & L for 75 mm thick, plain cement concrete 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection etc, finishing surface even and smooth without using extra cement complete all as specified and directed. |
| 81 | M&L for point wiring using approved colour coding as per IS, with stranded copper conductor 1.5 Sq.mm (nominal area), single core, PVC insulated and unsheathed stranded cable 1100 volts grade (FRLSH), ISI-694 marked drawn through in and including non metalic heavy duty, PVC concealed conduit of minimum 20 mm bore in wall/ floor and fixed on ceiling/ roof etc after cutting, chasing the wall etc and making good of disturbed surface, including all accessories etc, heavy duty ISI marked, including pressed steel modular sunken boxes of suitable size with minimum thickness 2mm duly concealed in walls for housing of modular switches, switch socket outlets, fan regulator etc including provn of PVC insulated stranded copper conductor 1.5 Sqmm (nominal area) (FRLSH) single core cables as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed. (Note- Piano switch and sockets will be measured and paid separately) :- |
| 82 | (a) one light point controlled by one switch. |
| 83 | (b) one fan point controlled by one switch |
| 84 | (c ) one 3 pin socket outlet 5 amps on the same board controlled by one switch. |
| 85 | (d) one 3 pin socket outlet 5 amps on independent board controlled by one switch. |
| 86 | All as per item No 81 above for one socket outlet three pin 15 amps control by one switch independent board with cable 2.5 sqmm size complete all as specified and directed. |
| 87 | S & F for modular white cover plate with frame 3 module complete all as specified and directed by Engr-in-Charge |
| 88 | S & F for modular white cover plate with frame 4 module complete all as specified and directed by Engr-in-Charge |
| 89 | S & F for modular white cover plate with frame 6 module complete all as specified and directed by Engr-in-Charge |
| 90 | S&F modular switches suitable for type AC 240V, 6 amps 1 module complete all as specified and directed by Engr-in-Charge |
| 91 | S&F modular sockets suitable for type AC 240V, 6 amps 2 module complete all as specified and directed by Engr-in-Charge |
| 92 | S&F modular switches suitable for type AC 240V, 16 amps 1 module complete all as specified and directed by Engr-in-Charge |
| 93 | S&F modular power sockets suitable for type AC 240V, 16 amps 2 module complete all as specified and directed by Engr-in-Charge |
| 94 | S&F modular fan regulator suitable for type AC 240V, 2 module complete all as specified and directed by Engr-in-Charge |
| 95 | S&F ceiling rose , polycarbonate, isolated body with 2 to 3 terminals complete all as specified and directed by Engr-in Charge |
| 96 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep, Five star rated with brushless direct current motor, complete all as specified and directed |
| 97 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers, complete all as specified and as directed. |
| 98 | S & F Air circulator fans 230 volts single phase oscillating 450mm sweep suitable for wall mounting complete all as specified and directed |
| 99 | S & F 20 Watts LED COOL LIGHT fitting, surface mounting general purpose LED Battens in Extruded Aluminum housing with wide range of wattages to suite variety of application areas, complete all as specified and directed by the Engr-in-Charge. Make : Havells Cat No. LUMILINEPLUSNEOBS20WLED865SPCSSIND or techno commercial equivalent Philips/Bajaj. |
| 100 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roofceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed |
| 101 | S&F sub main wiring complete with two runs of 6 sqmm PVC insulated unsheathed single core multistrand copper conductor cable of 1100 volts grade drawn through new non metalic rigid PVC conduit pipe concealed in wall alongwith accessories fixed on walls/floors/ceiling with one run of 6 sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor all as specified and directed by Engr-in-Charge. Note:- Two runs of PVC insulated cable 6 sqmm + one run 6 sqmm of earth wire and one run of conduit including accessories shall be measured as one length. |
| 102 | S&F MCB distribution board made of CRCA sheet, powder coated paint comforming of IS 13032, double door fixed in switch boards/wall at various places of capacity 415 volt 4 way MCB DB, TPN with 200 Amp rated bus bar conforming to IP 38 protection complete all as specified and directed. |
| 103 | S&F MCB distribution board made of CRCA sheet, powder coated paint comforming of IS 13032, double door fixed in switch boards/wall at various places of capacity 415 volt 8 way MCB DB, SPN with 200 Amp rated bus bar conforming to IP 38 protection complete all as specified and directed. |
| 104 | S&F MCB of rating 415 Volts, TPN 63Amps complete all as specified and directed. |
| 105 | S&F MCB of rating 240 Volts, SPN 40 Amps complete all as specified and directed. |
| 106 | S&F MCB of Single pole of rating 40Amps 240 Volts complete all as specified and directed. |
| 107 | S&F MCB of Single pole of rating 6 to 32 Amps 240 Volts complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayNov 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender