Tender For Repairs To Wooden Furniture /Sofa Set/ Repairs And Re-Canning Of Chairs And Polishing Of Wooden Furniture At Ge (Af) Tambaram (8968/E8)
Tender Value
45 Lakhs
Estimated cost
Bid Submission
17 Nov 2026
20 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chengalpattu → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Wooden Furniture /Sofa Set/ Repairs And Re-Canning Of Chairs And Polishing Of Wooden Furniture At Ge (Af) Tambaram (8968/E8)
BOQ
| Sl. No. | Item Description |
| 1 | BED PLYTOP: FD-246Removing the old unserviceable head board including legs from bed plywood top, supply and fix new head board of size 900 mm x 660 mm made out of 2 Nos of verticals of size 60 mm x 60 mm x 660 mm using 1st class hard wood (verticals shall be shaped as legs of size 60 mm x 60 mm at top and 30 mm x 30 mm at bottom) and 2 Nos of stiffeners 40 mm x 60 mm ( Top and bottom round shaped) with 75 mm width and 22 mm thick soft wood battens between stiffeners covered with 4 mm thick plywood OST exterior grade on both side and 12 mm half rounded teak wood beading around the edges of plywood by providing 2 Nos of 25 mm size round head brass screws for MNF set key holes and complete all as specified and as per drawing & as directed. |
| 2 | All as per item No 1 above but foot board of bed plywood top of size 900 mm x 500 mm. |
| 3 | supply and fix long rail of bed plywood top of size 90 mm x 35 mm,1980 mm long made from Ist class hard wood and providing brackets 2 Nos made from flat iron of size 35 mm x 5 mm thick, 200 mm long on both ends and finishing the exposed wooden surface with including removing the old unserviceable long rail complete all as specified and as per drawing & as directed. |
| 4 | Removing the old unserviceable plywood from bed plywood top, supply and fix new plywood BWR type, exterior grade (Make: Green Ply/Century/Archid Ply), approved quality of size 1900 mm x 900 mm, 12 mm thick with suitable size of MS screws as per required for fixing of ply top, complete all as specified and as per drawing & as directed. |
| 5 | Removing the existing unserviceable /broken wooden stiffeners (supporting pieces) and supply and fix 1st class hard wooden stiffeners of size 45mmx 45mm x 900mm long duly fixed between both long rail at equal distance to support top of Bed with ply wood top as specified all as shown on drg and as directed by Eng-in-Charge. |
| 6 | Repairs to shaking of Bed hard with ply top and provided new MS L clamp 75mm x 75mm x 50mm ,5mm thick 4 Nos of each set for Bed hard with ply top complete all as specified as per drawing. |
| 7 | TABLE DINING 8 PERSONS : FD-239 & 273Removing the unserviceable top of table dining 8 persons, supply and fix new top of size 1800 mm x 900 mm made out of 18 mm thick commercial ply wood, BWR grade, approved make/quality fixed with 1mm thick plastic laminated sheet-matt finished and 4mm thick teakwood beading all around the table top and complete all as specified and as per drawing & as directed. |
| 8 | Removing the old unserviceable damaged leg of table dining 8 persons, supply and fix new leg of size 75 mm x 40 mmx 722 mm long made from 1st class hard wood shape equal to match with the other extending legs and the existing complete all as specified and as per drawing & as directed. |
| 9 | Replacing the long rails of table dining 8 persons by removing the unserviceable old long rail, supply and fix new long rail made of 1st class hard wood of size 25 mm x 100 mm x 1800 mm long approved quality and complete all as specified and as per drawing & as directed. |
| 10 | Replacing the short rails of table dining 8 persons by removing the unserviceable old side rail, supply and fix new side rail made out of 1st class hard wood of size 25 mm x100mm X 900 mm long approved quality and complete all as specified and as per drawing & as directed. |
| 11 | Repairs to shaking of Table Dining 8 persons and supply and fix new MS L clamp brackets 4 pieces of size 75mmx75mmx25mm - 5 mm thick with steel screws of Table dining 8 person complete all as specified as per drawing. |
| 12 | TABLE DINING 6 PERSONS:FD-239 & 273Removing the unserviceable top of table dining 6 persons, supply and fix new top of size 1500 mm x 900 mm made out of 18 mm thick commercial plywood BWR grade of approved quality fixed with 1mm thick laminated sheet-matt finished approved quality/ make and 4mm thick teakwood beading all around table top and complete all as specified and as per drawing & as directed. |
| 13 | Removing the old unserviceable leg of table dining 6 persons, supply and fix new leg of size 40 mm x 75 mm x 722 mm long made fromI 1st class hard wood duly shaped equal to match with the other existing legs and finishing the surfaces complete all as specified and as per drawing & as directed. |
| 14 | Replacing the long rails of table dining 6 persons by removing the unserviceable old long rail, supply and fix new long rail made of 1st class hard wood of size 25 mm x 100 mm x 1500 mm long approved quality, complete all as specified and as per drawing & as directed. |
| 15 | Replacing the short rails of table dining 6 persons by removing the unserviceable old side rail (short), supply and fix new side rail (short) made out of 1st class hard wood of size 25 mm x 100 mm, 900 mm long approved quality finished with complete all as specified and as per drawing & as directed. |
| 16 | Repairs to shaking of Table dining 6 persons and supply and fix new triangular teak wood corner brackets 4 pieces of size 75mmx75mmx25mm with steel screws of Table dining 6 person, complete all as specified as per drawing. |
| 17 | TABLE WRITING :FD-249 & 275Removing the unserviceable top of table writing, supply and fix new top of size 1145 mm x 600 mm made from 18 mm thick commercial ply wood BWR grade approved quality fixed with plastic laminated sheet 1mm thick-mat finished including providing teak wood beading 18 mm wide, 4 mm thick all around the top and complete all as specified and as per drawing & as directed. |
| 18 | Replacing the old unserviceable broken legs from table writing by removing the existing leg, supply and fix new leg of size 35 mm x 55 mm x 717 mm long made out of 1st class teak wood duly shaped/ sized to match with the other wooden members and complete all as specified and as per drawing & as directed. |
| 19 | Removing the unserviceable cup board shutters from table writing, supply and fix new shutters of size 400 mm x 700 mm made from 18 mm thick commercial ply wood, BWR grade, approved, 18 mm x 6 mm teak wood beading fixed all around the door along with stainless steel piano hinges of size 15 mm and aluminium anodised knob of size 40 mm including finishing ., complete all as specified and as per drawing & as directed. |
| 20 | Replacing the unserviceable cup board locks from table writing, supply and fix brass cup board lock of size 40 mm, with duplicate keys, fixed with screws all as specifed and as directed. |
| 21 | Supply and fixing Short stiffener bottom of size 50 x 25mm x 550mm for table writing using teak wood after cutting and making to size and shape all as shown on drawing fixed in repairs as specified all as shown on drg and as directed by Eng-in-Charge. |
| 22 | Removing the broken unserviceable bottom stiffener long from table writing, supply and fix new bottom stiffener long made out of 1st class hard wood of size 50 mm x 25 mm, 1145 mm long- duly shaped etc and finishing with two coats of french polish complete all as specified and as per drawing & as directed. |
| 23 | Removing the existing unserviceable drawer and supply and fix new drawer size 300mmx600mmx75mm, made out of teak wood plank 12 mm thick for sides and back and 18mm thick commercial ply wood BWR grade approved, prelaminated one side with decorative choice lamination & other side balancing white lamination for front and 6mm thick plywood for bottom of drawer (Plywood, grade BWR, type BB with no. of ply 5) including fittings such as knobs etc all as specified/directed and as shown on drg.Note:- Each drawer will be measured as single unit. |
| 24 | Removing the existing unserviceable back ply 6mm thick and supply and fix new back ply size 580mmx410mm, made out of 6mm thick one side teak face Plywood grade BWR, type BB, (No. of ply 5) all as specified/directed and as shown on drg. |
| 25 | Supply and fixing of Side rail top (single piece) of size 25 x 50mm X 550mm (short) for table writing using teak wood after cutting and making to size and shape all as shown on drawing fixed in repairs as specified all as shown on drg and as directed by Eng-in-Charge. |
| 26 | Supply and fixing of Long rail top (single piece) of size 25 x 50 x 640mm for table writing using teak wood after cutting and making to size and shape all as shown on drawing fixed in repairs as specified all as shown on drg and as directed by Eng-in-Charge. |
| 27 | Repairs to shaking of Table writing and supply and fix new tringular teak wood corner brackets 4 pieces of size 75mmx75mmx25mm with steel screws of Table writing complete all as specified as per drawing. |
| 28 | TABLE WOODEN 900MM X 600MM X 760MM WITH/WITHOUT DRAWER: FD-223/224&283/284Removing the unserviceable top of table wooden of size 900 mm x 600 mm with/without drawer, supply and fix new top of size 900 mm x 600 mm made from 18 mm thick commercial ply wood, BWR grade, approved quality fixed with 1mm thick plastic laminated sheet-matt finished and providing teak wood beading 18 mm wide 4 mm thick all around the top , complete all as specified and as per drawing & as directed. |
| 29 | Replacing the old unserviceable broken legs from table wooden 900 mm x 600 mm x 760 mm with/without drawer by removing the existing leg, supply and fix new leg of size 30 mm x 60 mm x 741 mm made out of 1st class hard wood duly shaped/ sized to match with other wooden members and complete all as specified and as per drawing & as directed. |
| 30 | Removing the existing unserviceable long rail (Front and Back) of table wooden 900 mm x 600 mm x 760 mm with/without drawer, supply and fix new long rail of size 50 mm x 25 mm x 900mm long made from 1st class hard wood and complete all as specified and as per drawing & as directed. |
| 31 | Removing the existing unserviceable side rail of table wooden 900 x 600 x 760 mm with / without drawer, supply and fix new side rail of size 50 mm x 25 mm x 600 mm long made from 1st class hard wood and finishing with two coats of french polish etc, complete all as specified and as per drawing & as directed. |
| 32 | Removing the broken unserviceable stiffener from table wooden 900 mm x 600 mm x 760 mm with/without drawers, supply and fix new stiffener made out of 1st class hard wood of size 25 mm x 50 mm x 900 mm long and complete all as specified and as per drawing & as directed. |
| 33 | Removing the broken unserviceable drawer of table 900 x 600 x 760mm with/without Drawer, supply and fix new drawer made out of teak wood plank, The side and back of drawer shall be of 12 mm thick and 110mm high,The front of drawer shall be of 20mm x110mm in section teak wood planks.The bottom of drawer shall be of 6mm thick commercial ply wood, BWR grade, approved including fittings such as knobs / handles etc and complete all as specified and as per drawing & as directed. |
| 34 | Repairs to shaking of Table wooden 3'x2' with and without drawer and supply and fix new tringular teak wood corner brackets 4 pieces of size 75mmx75mmx25mm with steel screws of Table wooden with and with out drawer complete all as specified as per drawing. |
| 35 | SIDE BOARD :FD-241Removing the unserviceable top of side board, supply and fix new top of sizes 1220mm x 455mm madeout of 18 mm thick commercial ply wood, BWR grade, approved quality fixed with 1 mm thick matt finish laminated sheet and providing teak wood beading 4mm thick, 20 mm width all around complete all as specified and as per drawing & as directed. |
| 36 | Removing the unserviceable shutters from side board, supply and fix new shutters of sizes 600mm x 390mm made out of 18 mm thick particle board one side teak face, fixing with MS continuous Piano type hinges and 4 mm thick teak wood beading alround shall be fixed all around complete all as specified and as per drawing & as directed. |
| 37 | Removing the unserviceable plywood from back of the side board, supply and fix new back of plywood of sizes 1220mmx700mm x 6mm thick BWR plywood one side teak face complete all as specified and as per drawing & as directed. |
| 38 | Removing the existing unserviceable side and supply and fix new side made out of 18mm thick commercial ply wood, BWR grade, approved prelaminated one side with decorative choice lamination & other side balancing white lamination not less than 1.5mm thick of sizes 760mmx455mm etc complete all as specified/directed and as shown on drg. Note:-Each side shall be measured as single units. |
| 39 | Removing existing unserviceable bottom planks of side board and providing/fixing new bottom of sizes 455mmx1228mm, made out of 1st class hard wood of exisiting size and fixing the same in its original position complete all as specified and as per drawing & as directed. |
| 40 | Removing the unserviceable shelves of side board and providing the new one made out of 12 mm 1st class hard wood of existing size and fixing the same with in its original position complete all as specified and as per drawing & as directed. |
| 41 | Removing the unserviceable leg (long) of side board and providing the new leg (Long) of sizes 1140mmx380mm made out of 1st class teak wood of exisitng size and shape and fixing the same with in its original position complete all as specified and as per drawing & as directed.. |
| 42 | Removing the existing unserviceable broken wooden legs (Short) and supply and fix new teak wood leg (Short), size 45mmx45mmx125mm etc complete all as specified/directed and as shown on drg.Note:- Each leg will be measured as single unit. |
| 43 | Removing the existing unserviceable drawer and supply and fix new drawer of size 380mmx450mmx155mm, made out of teak wood plank 12 mm thick for sides and back and 18mm thick commercial ply wood BWR grade approved, prelaminated one side with decorative choice lamination & other side balancing white lamination for front and 6mm thick plywood for bottom of drawer, including fittings such as knobs etc all as specified/ directed and as shown on drg.Note:-Each drawer will be measured as single unit. |
| 44 | Removing the existing unserviceable bottom of side board and supply and fix new bottom of sizes 455mmx1228mm, made out of 18mm thick plywood, grade BWR, type BB all as specified/directed and as shown on drg. |
| 45 | TABLE PEG :FD-277/FD-384Removing the unserviceable top of peg table of size 450 mm x 300 mm, supply and fix new top of size 450 mm x 300 mm made from 18 mm thick plywood BWR grade, fixed with 1mm thick matt finish laminated sheet and providing teak wood beading 18 mm wide, 4mm thick all around and complete all as specified and as per drawing & as directed. |
| 46 | Replacing the old unserviceable broken legs from peg table by removing the existing leg, supply and fix new leg of size 30 mm x 50 mm X 380mm made out of 1st class hard wood duly shaped/sized to match with other wooden members etc, all as specified and as per drawing & as directed. |
| 47 | Removing the existing unserviceable long rail top of peg table, supply and fix new long rail top of size 20 mm x 40 mm, 380 mm long made from 1st class hard wood of and complete all as specified and as per drawing & as directed. |
| 48 | Removing the existing unserviceable short rail and supply and fix new teak wood bottom rail of size 20x40x280mm all as specified and as shown on drg. |
| 49 | Repairs to shaking of Table peg and supply and fix new tringular teak wood corner brackets 4 pieces of size 75mmx75mmx25mm with steel screws of Table Peg complete all as specified as per drawing. |
| 50 | TABLE CENTRE :FD-274/235Removing the unserviceable top of table centre, supply and fix new top of size 900mmx 450mm made out of 18 mm thick plywood BWR grade fixed with 1mm thick matt finish laminated sheet and providing teak wood beading, 4 mm thick, 20 mm width all around the top of table centre and complete all as specified and as per drawing & as directed. |
| 51 | Replacing the unserviceable broken legs from table centre by removing the existing legs, supply and fix new legs of size 30 mm x 60 mm x 400 mm made out of 1st class hard wood duly shaped/sized suitable to other wooden members and finished complete all as specified and as per drawing & as directed. |
| 52 | Removing the existing unserviceable long rail (Top) of table centre, supply and fix new long rail (Top) of size 30 mm x 60 mm x 900mm made from 1st class hard wood and finishing complete all as specified and as per drawing & as directed. |
| 53 | Removing the existing unserviceable Short rail of table centre, supply and fix new short rail of size 30 mm x 60 mm x 450mm made from 1st class hard wood and finishing complete all as specified and as per drawing & as directed. |
| 54 | Removing the existing unserviceable Stiffener of table centre, supply and fix new Stiffener of size 50mm x 20mm x450mm made from 1st class hard wood and complete all as specified and as per drawing & as directed. |
| 55 | Repairs to shaking of Table Centre and supply and fix new tringular teak wood corner brackets 4 pieces of size 75mmx75mmx25mm with steel screws of Table centre complete all as specified as per drawing. |
| 56 | TABLE BED SIDE :FD-248/276Removing the unserviceable top of table bed side of size 450 mm x 230 mm x 510mm, supply and fix new top of size 450 mm x 230 mm x 510mm made out of 18 mm thick plywood BWR grade fixed with 1 mm thick laminated sheet teak veneer face on top of table bed side complete all as specified and as per drawing & as directed. |
| 57 | Supply and fixing for side of table bed side of size 230mm x 510 mm using 18 mm thick plywood BWR grade fixed with 1 mm thick laminated sheet teak veneer face for side of table bed side after cutting and making to size and shape all as shown on drawing fixed in repairs including after preparation of surfaces as specified all as shown on drg and as directed by Eng-in-Charge. |
| 58 | Removing the unserviceable back of table bed side, supply and fix new back of size 510 mm x 450 mm made from 6 mm thick commercial plywood BWR grade complete all as specified and as per drawing & as directed. |
| 59 | Removing the unserviceable shelf of table bed side, supply and fix new shelf of size 450 mm x 230 mm made from 12 mm thick BWR grade plywood complete all as specified and as per drawing & as directed. |
| 60 | Repairs to shaking of Table Bed side complete all as specified as per drawing. |
| 61 | TABLE WOODEN 600 MM X 600 MM X 760 MM :FD-293Removing the unserviceable top of table wooden of size 600 mm x 600 mm x 760 mm, supply and fix new top of size 600 mm x 600 mm made from plywood 18 mm thick BWR grade, fixed with 1 mm thick matt finished laminated sheet and providing 4 mm thick, 20 mm width teak wood beading all around, complete all as specified and as per drawing & as directed. |
| 62 | Replacing the unserviceable broken legs from table wooden 600 mm x 600 mm by removing the existing leg, supply and fix new leg of size 35 mm x 55 mm, 740 mm long made out of 1st class hard wood duly shaped/ sized suitable to other wooden members and all as specified and as per drawing & as directed. |
| 63 | Removing the existing unserviceable long rail (Top) all sides of table wooden 600 mm x 600 mm x 760 mm, supply and fix new long rail (Top) all sides of size 25 mm x 50 mm x 600 mm long made from 1st class hard wood of approved quality and complete all as per drawing and as directed. |
| 64 | Supply and fixing of new stiffener of table wooden 600 mm x 600 mm of size 35 mm x 25 x 600 mm long made from 1st class hard wood duly finished complete all as specified and as per drawing & as directed. |
| 65 | Repairs to shaking of Table wooden 2'x2' and supply and fix new tringular teak wood corner brackets 4 pieces of size 75mmx75mmx25mm with steel screws of Table wooden 2'x2' complete all as specified as per drawing. |
| 66 | TEAPOY :FD-278/232 and 382Removing the unserviceable top of teapoy, supply and fix new top of size 600 mm x 450 mm made out of 18 mm thick plywood BWR grade and fixed with 1 mm thick matt finished laminated sheet on the top and providing 4 mm thick, 20 mm width teak wood beading all around complete all as specified and as per drawing & as directed. |
| 67 | Replacing the unserviceable broken legs from teapoy by removing the existing legs, supply and fix new legs of size 30 mm x 60 mm x 530mm, made out of 1st class teak wood duly shaped/sized suitable to other wooden members and complete all as specified and as per drawing & as directed. |
| 68 | Removing the existing unserviceable side rail top (Long) of teapoy, supply and fix new side rail top (Long) of size 50 mm x 30 mm X 510mm made from 1st class hard wood and complete all as specified and as per drawing & as directed. |
| 69 | Removing the existing unserviceable stiffener of teapoy of size 20 x 50mm x 420mm, supply and fix new stiffener of teapoy of size 20 x 50mm x 420mm made out of 1st class teak wood duly shaped/sized suitable to other wooden members and finishing with two coats of french polish complete all as specified and as per drawing & as directed. |
| 70 | Repairs to shaking of Teapoy and supply and fix new tringular teak wood corner brackets 4 pieces of size 75mmx75mmx25mm with steel screws of Teapoy complete all as specified as per drawing. |
| 71 | TABLE DRESSING GENTS :FD-379/230Removing the existing unserviceable top of table dressing gents and supply and fix new top of size 900mm x 300mm made out of 12mm thick plywood and 1 mm thick matt finished plastic laminated sheet on top fixed in position complete all as specified and as per drawing & as directed. |
| 72 | Removing the existing unserviceable Sides of table dressing gents and supply and fix new sides of size 300mm x 155mm made out of 12mm thick plywood and 1 mm thick matt finished plastic laminated sheet on top fixed in position complete all as specified and as per drawing & as directed. |
| 73 | Removing the existing unserviceable bottom of table dressing gents and supply and fix new bottom of size 900mm x 300mm made out of 12mm thick plywood fixed in position complete all as specified and as per drawing & as directed. |
| 74 | Removing the existing unserviceable back of table dressing gents and supply and fix new back of size 900mm x 155mm made out of 12mm thick teak wood planks fixed in position complete all as specified and as per drawing & as directed. |
| 75 | Removing the existing unserviceable mirror with frame and supply and fix new mirror of size 390mmx760mm, 5.5 mm thick (Make:Modiguard/Atul) with frame of sizes 410mm width and 790 mm high including 6mm thick BWR ply fixed in back side with support of two teak wood batten of sizes 25mmx35mmx1115mm shall be provided on 6mm thick ply wood backing, complete all as specified and as per drawing & as directed. |
| 76 | Removing the existing unserviceable drawers of table dressing gents over all size 280mm x 295mm, supply and fix new drawers of size 280mm x 295mm of table dressing gents made out of front of drawers shall be of sizes 280mm x130mm x 12 mm thick BWR ply wood and 1 mm thick matt finished plastic laminated sheet on top fixed in position including Brass knobs provided the drawers. Sides of the drawers shall be of sizes 290mm x 125mm x 12mm thick wood plank running smoothly in the drawers.The bottom and back of drawer shall be of 6mm thick BWR ply wood, complete all as specified and as per drawing & as directed. |
| 77 | TABLE DRESSING LADIES FD-251/378 Taking down old unserviceable existing parts of table dressing Ladies and replacement of the same with supply and fix of new parts made duly shaped/ sized to match with other wooden members etc, fixed in position all as shown on drawing for the following:- Replacement of top by providing 18 mm thick commercial plywood BWR grade of approved quality teak veneer face fixed in position complete all as specified and as per drawing & as directed. |
| 78 | Replacement of sides by providing 18 mm thick commercial plywood BWR grade of approved quality teak veneer face fixed in position complete all as specified and as per drawing & as directed. |
| 79 | Replacement of unserviceable mirror with frame for table dressing ladies, Supply and fix mirror of size 365mm x 1220 mm x 5.5 mm thick including the frame using 6 mm plywood on back and teak wood beading alround according to the size and shape shown on drawing and as directed. |
| 80 | Replacement of unserviceable bottom commercial plywood BWR grade of approved quality,supply and fix new bottom made out of 18mm thick BWR grade plywood fixed in position all as specified and directed |
| 81 | Replacement of unserviceable drawers of dressing table ladies supply and fix new drawer made out of side and back of drawer by providing 12 mm thick teak wood, bottom of drawer using 6mm thick commercial plywood and front of drawer using 19 mm thick particle board with 1 mm thick plastic laminated sheet on top including 3mm thick teak wood edging all around the edges of drawers including providing vertical support using teak wood of size 45 mm x 45 mm at the back of mirror all as specified and as directed. |
| 82 | Replacement of unserviceable Glass shutter made of 5mm thick plain glass with two way aluminium channel all as specified and as directed. |
| 83 | Replacement of unserviceable leg of size as shown on drawing and as directed using 1st class wood all as specified and as directed. |
| 84 | Replacement of unserviceable aluminium anodised knob of standard quality & size for each drawer all as specified and as directed |
| 85 | TABLE DRESSING LADIES WITH MIRROR INCLUDING STOOL FD- MAP-II/07 Taking down old unserviceable existing parts of table dressing Ladies with mirror including stool and replacement of the same with supply and fix of new parts made duly shaped/ sized to match with other wooden members etc, fixed in position all as shown on drawing for the following:- Replacement of top by providing 18 mm thick commercial plywood BWR grade of approved quality teak veneer face fixed in position complete all as specified and as per drawing & as directed. |
| 86 | Replacement of sides by providing 18 mm thick commercial plywood BWR grade of approved quality teak veneer face fixed in position complete all as specified and as per drawing & as directed. |
| 87 | Replacement of unserviceable mirror with frame for table dressing ladies, Supply and fix mirror of size 365mm x 1220 mm x 5.5 mm thick including the frame using 6 mm plywood on back and teak wood beading alround according to the size and shape shown on drawing and as directed. |
| 88 | Replacement of unserviceable bottom commercial plywood BWR grade of approved quality,supply and fix new bottom made out of 18mm thick BWR grade plywood fixed in position all as specified and directed |
| 89 | Replacement of unserviceable drawers of dressing table ladies supply and fix new drawer made out of side and back of drawer by providing 12 mm thick teak wood, bottom of drawer using 6mm thick commercial plywood and front of drawer using 19 mm thick particle board with 1 mm thick plastic laminated sheet on top including 3mm thick teak wood edging all around the edges of drawers including providing vertical support using teak wood of size 45 mm x 45 mm at the back of mirror all as specified and as directed. |
| 90 | Replacement of unserviceable anodised knob of standard quality & size for each drawer all as specified and as directed |
| 91 | M & L for removing old unserviceable/ wornout cushion and tapestry cloth from stool cushion and supply of new cushion make : sleep Well/Kur-lon with 32 density as approved by GE and cushion covered with tapestry cloth of approved shade & quality over a cover of lining cloth duly covered and stiched over the cushions complete in all as specified and as directed. (Note : Cost of the tapestry cloth incorporated in the work shall be of not less than Rs. 300/- per meter. make : Bombay Dying/ Raymonds/ Arvind Mills) |
| 92 | HAT STAND WITH MIRROR ( FD-23M, FD-206 & FD-233)Removing the unserviceable board and wooden battens of Hat stand with mirror, supply and fix new board and wooden battens of Hat stand with mirror of size 1000mm x 710 mm made out of 18/19 mm thick block board exterior grade fixed with 4mm thick teak face plywood BWR grade of size 1000mm x 710mm to front of frame and 4mm thick commercial plywood of 1000mm x710mm shall be provided to the back frame. Removing the unserviceable Teak wood edging 6mmx35mm of Hat stand with mirror, Supply and fix new Teak wood edging of Hat stand with mirror 6mm x35mm alround the Hat stand frame all as specified and as directed. |
| 93 | Taking down of old unserviceable alluminium pegs from Hat stand with mirror and S & F new Brass pegs 120mm x 75mm of superior quality fixed with brass screws all as specified and as directed. |
| 94 | Taking down old unserviceable mirror and T/W beading from Hat stand with mirror and S & F new mirror of size 300mm x 440mm x 5.5mm thick shall be provided with Teak wood beading of size 10mm x12mm made to shape as shown on drg and as directed, Make of mirror Modi Guard/Atul. |
| 95 | BIN LINEN MULTIPURPOSES (FD/E6/MAP/09)Taking out top from Bin linen multipurpose and replacing the same with 18mm thick commercial plywood BWR grade approved natural teak shade exterior quality complete all as specified and as shown on drawing & as directed. |
| 96 | All as per item No.95 -but front shulter of size 560mm x 400mm with magnatic catcher as per drg |
| 97 | All as per item No. 95 but drawer as per drawing and as directed. |
| 98 | All as per item No. 95 but rear sheet as per drawing and as directed. |
| 99 | All as per item No. 95 but front shutter of size 675X400mm as per drawing and as directed. |
| 100 | All as per item No. 95 but side sheet as per drawing and as directed. |
| 101 | All as per item No. 95 but bottom sheet as per drawing and as directed. |
| 102 | Taking out of damaged / broken hard wood stiffener of size 25mmx25mmx450mm from Bin linen multipurpose and replacing the same made to size and shape with first class hard wood ( Teak) including all as per drawing and as directed. |
| 103 | Taking out old damaged legs of Bin linen and providing new legs made out of 1st class hard wood ( Teak) of same shape and size all as shown on drg and as specified & as directed. |
| 104 | CHAIR DINING WITH CUSHION, FD/E6/MAP/10®/ FD/MAP-II/04Following unserviceable /broken wooden parts from chair dining and supply and fixing of new wooden parts made out of 1st class hard wood teak, made to shape and size as per drgs, including tightening of chair, fixing of joints with glue and bamboo pins and all as specified and shown on drgs and as directed by Engr-in -charge.Supply and fix Front leg of 1st class hard wood teak all as specified and shown on drgs and as directed by Engr-in -charge |
| 105 | Supply and fix rear leg of 1st class hard wood teak all as specified and shown on drgs and as directed by Engr-in -charge |
| 106 | Supply and fix Front rail of 1st class hard wood teak all as specified and shown on drgs and as directed by Engr-in -charge |
| 107 | Supply and fix back rail of 1st class hard wood teak all as specified and shown on drgs and as directed by Engr-in -charge |
| 108 | Supply and fix side rail of 1st class hard wood teak all as specified and shown on drgs and as directed by Engr-in -charge |
| 109 | Removing the unserviceable back stiffener from chair dinning, supply and fix new back stiffener made out of teak wood duly shaped and size, complete all as specified and as per drawing & as directed. |
| 110 | Removing the unserviceable bottom stiffener from chair dinning, supply and fix new bottom stiffener made out of teak wood duly shaped and size, complete all as specified and as per drawing & as directed. |
| 111 | Supply and fix new MS L clamp brackets 75mmx75mmx25mm, 5mm thick (Set of 4 Nos of clamp each chair) with steel screws of Chair Dining complete all as specified as per drawing. |
| 112 | Removing unserviceable cushion from the seat of chair dining cushioned and providing new foam cushion 75mm thick 40 density of make sleepwell/Kurlon covered by tapestry cloth best quality (Cost shall be not less then Rs 300 per meter) on seat of 12mm thick plywood all as directed. |
| 113 | TABLE DINING 4 PERSONS (FD/MAP-II/03)Removing of the following unserviceable/broken wooden Parts from Table Dining 4'X3' and Supply & Fixing New Parts made to shape and size as per Drgs, including tightening of complete Table, fixing of joints with glue and bamboo pins and all as specified and shown on drgs and as directed by Engineer-in-Charge.Supply and fix Legs of 1st class hard wood (teak) |
| 114 | Supply and fix Short Rail of 1st class hard wood (teak) |
| 115 | Supply and fix Long Rail of 1st class hard wood (teak) |
| 116 | Supply and fix table top made out of 18/19mm thick commercial ply wood BWR grade approved one side laminated (Make-Kitply/Green ply/Archid ply) with 4mm thick 1st class hard wood teak edging around of table top |
| 117 | Sofa Sets 5 seater TPMaterial and labour for removing of old unserviceable long rail from seat of sofa set 3 seater and replacing single long rail with first class hard wood (Teak wood) of size 35 x 100 x 1680 as specified all as shown on drg and as directed by Eng-in-Charge. |
| 118 | Material and labour for removing of old unserviceable frame of seat back of sofa set 3 seater and replacing with first class hard wood (Teak wood) of required size and shape as specified all as shown on drg and as directed by Eng-in-Charge. |
| 119 | Material and labour for removing of old unserviceable stiffener in seat / back of sofa set 3 seater / single seater and replacing the same with first class hard wood (Teak Wood) of size 20 x 50 x600 as specified all as shown on drg and as directed by Eng-in-Charge. |
| 120 | Material and labour for removing of old unserviceable rear leg from sofa set 3 seater / single seater and replacing with first class hard wood (Teak wood) of size 35 x 70 x 500mm as specified all as shown on drg and as directed by Eng-in-Charge. |
| 121 | Material and labour for removing of old unserviceable front leg from sofa set 3 seater / single seater and replacing with first class hard wood (Teak wood) of size 35 x 70 x 500mm as specified all as shown on drg and as directed by Eng-in-Charge. |
| 122 | Material and labour for removing of old unserviceable side rail from sofa set 3 seater / single seater and replacing with first class hard wood (teak wood) of size 30 x 100 x 580mm as specified all as shown on drg and as directed by Eng-in-Charge. |
| 123 | Material and labour for removing of old unserviceable handle of sofa set 3 seater / single seater and replacing the same with first class hard wood (Teak wood) of size 20 x 50 x600 as specified all as shown on drg and as directed by Eng-in-Charge. |
| 124 | Material and labour for removing of old unserviceable foam and lining cloth /leather from seat and back of sofa set and supply and fix new 100 mm thick foam 40 density of size and shape as per required basis as specified all as shown on drg and as directed by Eng-in-Charge. |
| 125 | Material and labour for removing of old unserviceable Tapestry cloth /laether from seat and back of sofa set and supply and fix new tapestry cloth cover duly stitched of approved shade / colour with rate not less than Rs 350/- per metre as specified all as shown on drg and as directed by Eng-in-Charge. |
| 126 | CHAIR DINNING : FD-228 & 279 Removing the unserviceable rear leg from chair dinning, supply and fix new leg made out of teak wood of size 45 mm x 40 mm at centre and 30 mm x 25 mm at bottom, 890 mm long duly shaped and suitable for wooden members etc., complete all as specified and as per drawing & as directed. |
| 127 | Removing the unserviceable front leg from chair dinning, supply and fix new leg made of teak wood of size 25 mm x 50 mm at top and 25 mm x 45 mm at bottom, 460 mm long, duly shaped and suitable for wooden members etc, complete all as specified and as per drawing & as directed. |
| 128 | Removing the unserviceable front rail from chair dinning, supply and fix new rail made out of teak wood of size 65 mm x 35 mm, 350 mm long duly shaped and drilling holes for canning including provision of wooden screws of size 25 mm- 3 Nos inside portion of rail etc.,complete all as specified and as per drawing & as directed. |
| 129 | Removing the unserviceable back rail from chair dinning, supply and fix new rail made out of teak wood of size 65 mm x 30 mm, 310 mm long duly shaped and drilling holes for canning including provision of wooden screws of size 25 mm -3 Nos inside portion of rail etc., complete all as specified and as per drawing & as directed. |
| 130 | Removing the unserviceable side rail from chair dining, supply and fix new rail made out of teak wood of size 65 mm x 30 mm, 310 mm long, duly shaped and drilling holes for canning including provision of wooden screwes of size 25 mm -3 Nos inside portion of rail etc, complete all as specified and as per drawing & as directed. |
| 131 | Removing the unserviceable stiffener from chair dinning, supply and fix new stiffener made out of teak wood of size 25 mm x 20 mm, 365 mm long duly shaped etc, complete all as specified and as per drawing & as directed. |
| 132 | Removing the unserviceable hard rubber shoe from chair dinning,supply and fix new hard rubber shoe in Bottom of legs superior grade approved quality as directed. |
| 133 | CHAIR DINNING MAP :FD/MAP-II/05Removing the unserviceable rear leg from chair dinning, supply and fix new leg made out of teak wood of size 45 mm x 40 mm at centre and 30 mm x 25 mm at bottom, 890 mm long duly shaped and suitable for wooden members etc., complete all as specified and as per drawing & as directed. |
| 134 | Removing the unserviceable front leg from chair dinning, supply and fix new leg made of teak wood of size 25 mm x 50 mm at top and 25 mm x 45 mm at bottom, 460 mm long, duly shaped and suitable for wooden members etc, complete all as specified and as per drawing & as directed. |
| 135 | Removing the unserviceable front rail from chair dinning, supply and fix new rail made out of teak wood of size 65 mm x 35 mm, 350 mm long duly shaped and drilling holes for canning including provision of wooden screws of size 25 mm- 3 Nos inside portion of rail etc.,complete all as specified and as per drawing & as directed. |
| 136 | Removing the unserviceable back rail from chair dinning, supply and fix new rail made out of teak wood of size 65 mm x 30 mm, 310 mm long duly shaped and drilling holes for canning including provision of wooden screws of size 25 mm -3 Nos inside portion of rail etc., complete all as specified and as per drawing & as directed. |
| 137 | Removing the unserviceable side rail from chair dining, supply and fix new rail made out of teak wood of size 65 mm x 30 mm, 310 mm long, duly shaped and drilling holes for canning including provision of wooden screwes of size 25 mm -3 Nos inside portion of rail etc, complete all as specified and as per drawing & as directed. |
| 138 | Removing the unserviceable stiffener from chair dinning, supply and fix new stiffener made out of teak wood of size 25 mm x 20 mm, 365 mm long duly shaped etc, complete all as specified and as per drawing & as directed. |
| 139 | Removing the unserviceable hard rubber shoe from chair dinning,supply and fix new hard rubber shoe in Bottom of legs superior grade approved quality as directed. |
| 140 | M&L for removing broken/ unserviceable plastic seat from Chair dining and supply new the same with best quality plastic seat make : any other approved make all as specified and as directed. |
| 141 | CHAIR EASY : FD-229/281Removing the unserviceable rear leg of chair easy, supply and fix new leg made out of teak wood of size 60 mm x 25 mm at top and 30 mm x25 mm at bottom, 490 mm long duly shaped and suitable for wooden members etc, complete all as specified and as per drawing & as directed. |
| 142 | Removing the unserviceable front leg of chair easy, supply and fix new leg made out of teak wood of size 60 mm x 25 mm at top and 25 mm x 25 mm at bottom, 520 mm long duly shaped and suitable for wooden members etc, complete all as specified and as per drawing & as directed. |
| 143 | Removing the unserviceable arm of chair easy, supply and fix new arm made out of teak wood of size 65 mm x 25 mm, 610 mm long duly shaped and finished etc, complete all as specified and as per drawing & as directed. |
| 144 | Removing the unserviceable seat frame of chair easy, supply and fix new seat made out of teak wood of size 60 mm x 25 mm, frame size 585 mm x 500 mm with cane hole duly screwed with 25 mm wooden screws on inside batten as required etc, complete all as specified and as per drawing & as directed. |
| 145 | Removing the unserviceable back frame of chair easy, supply and fix new back made out of teak wood of size 60 mm x 25 mm, frame size 470 mm x 490 mm with cane hole duly screwed with 25 mm wooden screws on inside batten as required etc,complete all as specified and as per drawing & as directed. |
| 146 | Removing the unserviceable hard rubber shoe from chair dinning, S&F new hard rubber shoe in Bottom of legs superior grade approved quality as directed. |
| 147 | CHAIR WRITING : FD-280Removing the unserviceable front leg of chair writing, supply and fix new leg made out of teak wood of size 45 mm x 45 mm at centre and 30 mm x 30 mm at bottom, 660 mm long duly shaped and suitable for wooden members etc., complete all as specified and as per drawing & as directed. |
| 148 | Removing the unserviceable rear leg of chair writing, supply and fix new leg made out of teak wood of size 45 mm x 45 mm at centre and 30 mm x 30 mm at bottom, 860 mm long duly shaped and suitable for wooden members etc, complete all as specified and as per drawing & as directed. |
| 149 | Removing the unserviceable front rail of chair writing, supply and fix new rail made of teak wood of size 70 mm x 30 mm, 465 mm long etc duly shaped and drilling holes for canning including provision of wooden screws 25 mm - 3 Nos on inside portion of the rail as suitable for wooden members etc complete all as specified and as per drawing & as directed. |
| 150 | Removing the unserviceable side rail of chair writing, supply and fix new rail made out of teak wood of size 70 mm x 30 mm, 360 mm long duly shaped and drilling holes for canning including provision of wooden screws 25 mm - 3 Nos inside portion of the rail as suitable for other wooden members etc complete all as specified and as per drawing & as directed. |
| 151 | Removing the unserviceable handle of chair writing, supply and fix new handle made out of teak wood of size 60 mm x 25 mm, 460 mm long duly shaped and suitable for wooden members etc.complete all as specified and as per drawing & as directed. |
| 152 | Removing the unserviceable stiffener from chair writing, supply and fix new stiffener made out of teak wood of size 25 mm x 20 mm, 365 mm long duly shaped etc complete all as specified and as per drawing & as directed. |
| 153 | Removing the unserviceable hard rubber shoe from chair dinning, S&F new hard rubber shoe in Bottom of legs superior grade approved quality as directed. |
| 154 | Stool Dressing (FD-282)Removing the unserviceable rear leg from Stool Dressing, S&F new leg made out of teak wood as per drawing duly shaped and suitable for wooden members etc., complete all as per drawing and as directed |
| 155 | Removing the unserviceable front leg from Stool Dressing, S&F new front leg made of teak wood of as per drawing duly shaped and suitable for wooden members etc., complete all as per drawing and as directed |
| 156 | Removing the unserviceable top rail from Stool Dressing, S&F front rail made out of teak wood as per drawing duly shaped and drilling holes for canning including provision of wooden screws of size 25mm -3 Nos inside portion of rail etc., complete all as per drawing |
| 157 | Removing the unserviceable bottom rail from Stool Dressing, S&F back rail made out of teak wood as per drawing duly shaped and drilling holes for canning including provision of wooden screws of size 25mm -3 Nos inside portion of rail etc., complete all as per drawing and as directed. |
| 158 | Removing the unserviceable top side rail from Stool Dressing, S&F new leg made out of teak wood as per drawing duly shaped and drilling holes for canning including provision of wooden screwes of size 25mm -3 Nos inside portion of rail etc., complete all as specified and as directed. |
| 159 | Removing the unserviceable stiffener from Stool Dressing, S&F stiffener made out of teak wood as per drawing duly shaped etc., complete all as per drawing and as directed. |
| 160 | Removing the unserviceable hard rubber shoe from Stool dressing, S&F new hard rubber shoe in Bottom of legs superior grade approved quality as directed by GE. |
| 161 | REPAIR - RECANNING OF CHAIRSTaking out the existing unserviceable canning from Chair dining Seat FD-279/262 , cleaning the holes of chairs and rebated portion and recanning with new white plastic cane 0.4mm thick 2mm wide, half rounded and border with 0.4mm thick 3mm wide plastic and plastic cane seat canned in godrej pattern cane of approved superior quality with slippery texture etc., all as specified and directed. |
| 162 | Taking out the existing unserviceable canning from Chair Easy Seat FD-229 , cleaning the holes of chairs and rebated portion and recanning with new white plastic cane 0.4mm thick 4mm wide, half rounded and border with 0.4mm thick 3mm wide plastic and plastic cane seat canned in godrej pattern cane of approved superior quality with slippery texture etc., all as specified and directed. |
| 163 | Taking out the existing unserviceable canning from Chair Easy back FD-229 , cleaning the holes of chairs and rebated portion and recanning with new white plastic cane 0.4mm thick 4mm wide, half rounded and border with 0.4mm thick 3mm wide plastic and plastic cane seat canned in godrej pattern cane of approved superior quality with slippery texture etc., all as specified and directed. |
| 164 | Taking out the existing unserviceable canning from Chair Writing Seat FD-261/280, cleaning the holes of chairs and rebated portion and recanning with new white plastic cane 0.4mm thick 2mm wide, half rounded and border with 0.4mm thick 3mm wide plastic and plastic cane seat canned in godrej pattern cane of approved superior quality with slippery texture etc., all as specified and directed. |
| 165 | Taking out the existing unserviceable canning from Stool Dressing FD-27,252,374, cleaning the holes of chairs and rebated portion and recanning with new white plastic cane 0.4mm thick 2mm wide, half rounded and border with 0.4mm thick 3mm wide plastic and plastic cane seat canned in godrej pattern cane of approved superior quality with slippery texture etc., all as specified and directed. |
| 166 | POLISHING OF WOODEN FURNITURE: Preparation of wooden Bed hard with ply top removing placard and old polish, washing wooden surface with rubbing with sand paper to make the surface smooth including filling the cavities with wooden filler and free from all dust and applying one coat of sealer wood finishing after drying scratch and applying two coat of French polish (Make: Asian/Sheenlak ) until high glossy finish obtained to entire surface of all sides of inner ,outer,bottom & top of furniture , after polish apply touch wood oil all surface area of furniture items all as specified and directed by Eng-in-Charge.(FD -246) |
| 167 | All as per item No 166 above but for Book case glass front ( Drg No TBM-106) |
| 168 | All as per item No 166 above but for Chair Easy (Drg No FD-229/201) |
| 169 | All as per item No 166 above but for Chair with desklet ((TP) ) |
| 170 | All as per item No 166 above but for Chair writing (Drg No FD-250/280) |
| 171 | All as per item No 166 above but for Desk school type 'A' (Drg No FD-124/166/TP) |
| 172 | All as per item No 166 above but for Hat stand with mirror (Drg No FD -233/361) |
| 173 | All as per item No 166 above but for Peg Table (Drg No FD -384 / 277) |
| 174 | All as per item No 166 above but for Side board (Drg No FD -241/3997/26) |
| 175 | All as per item No 166 above but for Sofa set single seater (Drg No FD-281& TP) |
| 176 | All as per item No 166 above but for Sofa set three seater ((TP) |
| 177 | All as per item No 166 above but for Stool Dressing (Drg No FD -282 /252 ) |
| 178 | All as per item No 166 above but for Sofa set five seater (TP) |
| 179 | All as per item No 166 above but for Table Bed side (Drg No FD -276 / 248) |
| 180 | All as per item No 166 above but for Table 900x600x760mm with and without drawer (Drg No FD.41/42/223/224/283/284/231) |
| 181 | All as per item No 166 above but for Table 600x600x760mm (Drg No.FD.95/293) |
| 182 | All as per item No 166 above but for Table centre (Drg No FD- 274 & TP) |
| 183 | All as per item No 166 above but for Table dining 6 persons (Drg No FD-273/ 239) |
| 184 | All as per item No 166 above but for Table dining 8 persons (Drg No FD-273/ 239) |
| 185 | All as per item No 166 above but for Table dressing gents (Drg No FD-31/230) |
| 186 | All as per item No 166 above but for Table dressing Ladies (Drg No FD-378/ 251/232) |
| 187 | All as per item No 166 above but for Table writing (Drg No FD-249 / 275 ) |
| 188 | All as per item No 166 above but for Teapoy (Drg No FD-278 / 382) |
| 189 | All as per item No 166 above but for Bin linen multipurposes (Drg No FD/E6/MAP/09) |
| 190 | All as per item No 166 above but for Dressing gents (Drg No. FD/E6/MAP/16) |
| 191 | All as per item No 166 above but for Sofa set Five seater (Drg No FD -281) |
| 192 | All as per item No 166 above but for Chair Dining (Drg No FD -279/228/203) |
| 193 | All as per item No 166 above but for Sofa set four seater (Drg No. FD/MAP-II/02) |
| 194 | All as per item No 166 above but for Table dining 4 persons (Drg No. FD/MAP-II/03) |
| 195 | All as per item No 166 above but for Chair dining with cushion (Drg No. FD/MAP-II/04) |
| 196 | All as per item No 166 above but for Chair dining (Drg No. FD/MAP-II/05) |
| 197 | All as per item No 166 above but for Table dressing Ladies with mirror including Stool (Drg No FD-MAP II/07) Please Enable Macros to View BoQ information |
| 198 | All as per item No 166 above but for Table dressing Ladies with mirror including Stool (Drg No FD-MAP II/07) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysNov 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender