Tender For Certain Repair/ Replacement To Wooden And Aluminium Joinery Works And Its Connected Items At Zone B & E Area Under Ge Chennai
Tender Value
30 Lakhs
Estimated cost
Bid Submission
17 Nov 2026
18 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chennai → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Certain Repair/ Replacement To Wooden And Aluminium Joinery Works And Its Connected Items At Zone B & E Area Under Ge Chennai
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area not exc.1.5 sqm each including separating guard bars/grills/wire mesh etc., complete all as specified and as directed. |
| 2 | Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area exc.1.5 sqm but not exc 4sqm each including separating guard bars/grills/wire mesh etc., complete all as specified and as directed. |
| 3 | Taking down shutters of any description n.exc. 1sqm each including builders hardware complete all as specified and as directed. |
| 4 | Taking down shutters of any description exc. 1sqm but not exceeding 2sqm each including builders hardware complete all as specified and as directed. |
| 5 | Taking down shutters of any description n.exc. 1sqm each and refixing in the same opening after cutting, easing etc with new iron mongery complete all as specified and as directed. |
| 6 | Resecuring or easing and adjusting without taking down shutters of any description n exc. 1 sqm complete all as specified and as directed. |
| 7 | Taking down shutters of any description exc. 1sqm but not exc. 2 sqm and refixing in the same opening after cutting, easing etc with new iron mongery complete all as specified and as directed. |
| 8 | Resecuring or easing and adjusting without taking down shutters of any description exc. 1sqm but not exc. 2 sqm complete all as specified and as directed. |
| 9 | M&L for Second class Hard wood, plain solid straight chowkats and frames rebated on the solid, rounded or chamfered put together with glue pinned at joints, supplied and fitted complete all as specified and as directed. |
| 10 | M&L for 35mm thick second class hard wood Glazed and skeleton door shutters open rebated and prepared to receive glass, gauze, etc. with sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed. |
| 11 | As per item No.10 above of 30mm thick but windows, ventilators, etc are provided with stiles and rails as specified in SSR Part-I section 8 clause 8.24(b) supplied and fitted to chowkat complete all as specified and as directed. |
| 12 | M& L for 35 mm thick flush door shutter, solid core construction , with block board core and plywood face panels, commercial type on both side etc. complete all as specified and as directed. |
| 13 | S&F Plain framed, panelled shutter 35mm thick (two panel) with lock rail & panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. 2nd Class HW rail & style of size as per IS: 1003 (Part I), kiln seasoned & chemically pressure treated complete all as specified and as directed. |
| 14 | S&F in repair Aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.4mm fixed with aluminium wire staples fixed to wood/steel frames fixed in repairs complete all as specified and as directed. |
| 15 | S&F Aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.4mm fixed with aluminium wire staples fixed to wood/steel frames complete all as specified and as directed. |
| 16 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed. |
| 17 | S&F Sheet glass 4.0mm thick, plain ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane (any thickness, size, quality or description ) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed. |
| 18 | S&F 4.0mm thick, figured glass pin head type & glazing with oil putty in square n exc 0.5 sq.m in each pane from Aluminium section fixed with beads/glazing clips complete all as specified and as directed. |
| 19 | M&L for applying two coat of Synthetic enamel paint over a coat of pink primer for wooden surfaces including necessary preparation of new wooden surfaces of any description exc. 10cm width or girth complete all as specified and as directed. |
| 20 | S&F Solid PVC door frame of size 50mmx47mm made out of 5mm thick plain colour PVC sheet reinforced with 19mm MS square tube of 19 gauge mitred cut at two corners and joined by inserting two Nos of 150mm long brackets of 15mm x 15mm MS square tube inside the 19mm x 19mm square tube fixed to wall in repairs by drilling 100mm long MS screws using PVC fastener complete all as specified and as directed. |
| 21 | S&F Factory made solid PVC moulded door shutter with wood free EPS 28 to 30mm thick with 2,4,6 raised panel design with 2mm thick moulded Prelam PVC sheet on the front face & 2mm prelam PVC sheet on back face, supplying and fixing in frame at site complete all as specified and as directed. |
| 22 | S&F Butt hinges, 75mm size medium weight cold rolled mild steel Etc., complete all as specified and as directed. |
| 23 | S&F Butt hinges, 100mm size medium weight cold rolled mild steel Etc.,complete all as specified and as directed. |
| 24 | S&F Aluminium anodised barrel tower bolts of extruded section 100mm long complete all as specified and as directed. |
| 25 | S&F Aluminium anodised barrel tower bolts, extruded section of size 200mm long complete all as specified and as directed. |
| 26 | S&F Aluminium handles cast type anodised 100 mm size complete all as specified and as directed. |
| 27 | S&F Aluminium handles cast type anodised 150 mm size complete all as specified and as directed. |
| 28 | S& F Aluminium alloy, anodised sliding door bolts 300mm long with hasp and stable (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections complete all as specified and as directed. |
| 29 | S & F mild steel 300 mm , ordinary rat rail rod pattern springs including roller and roller plate including welding complete all as specified and as directed. |
| 30 | S & F in repairs mild steel 300 mm , ordinary rat rail rod pattern springs including roller and roller plate including welding complete all as specified and as directed. |
| 31 | S& F 140 mm over all length of cover plate, floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor complete all as specified and as directed. |
| 32 | S& F in repairs 140 mm over all length of cover plate, floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor complete all as specified and as directed. |
| 33 | S&F in repairs aluminium powder coated sliding window using aluminium section weighing not less than 0.495 Kg per RM for frame and 0.48 Kg per RM for sliding shutters including fixed with sash bars , aluminium anodised snap beads, screws and fixed along with same section in three rolling sliding shutters two for fully glazed with 5mm thick tinted glass fixed with glazing clips, and one for wire mesh shutters) etc (The rate is inclusive of all fixings of builders hard ware such as wiremesh hinges, bow handles, locking arrangements etc complete all as specified and as directed. |
| 34 | S&F in repairs aluminium powder coated ventilators using aluminium section weighing not less than 0.48 Kg per RM for frame louvers aluminium anodised snap beads, screws and fixed along with 5mm thick frosted/pin headed glass fixed with glazing clips, and one for wire mesh shutter fixed on frame etc (The rate is inclusive of all fixings of builders hard ware such as wire mesh, hinges, bow handles, locking arrangements etc complete all as directed. |
| 35 | S&F in repairs aluminium powder coated door (coating of any colour) aluminium section weighing not less than 0.55 Kg per RM for frame and door shutter including necessary joining cleats, glazing clips rubber neoprane packing, handle 2 numbers per shutters, hinges, aluminium anodised snap beads, screws and fixed along with 8mm thick glass fixed with glazing clips, shutter fixed on frame etc (The rate is inclusive of all fixings of builders hard ware such as glass, hinges, handles, locking arrangements etc complete all as specified and as directed. |
| 36 | Cutting holes in brick walls built in cement mortar for inserting hold fast etc depth of embedded portion of hold fasts exc half brick but n exc one brick thick wall and making good to the dismantled portion in cement mortar 1:3 and providing cement concrete 1:2:4 type B1 for concreting of hold fasts complete all as specified and as directed. |
| 37 | S & F in repairs 18mm thick particle board medium density, flat pressed, single layer type or three layer type with BWR type adhesive fixed in pelmet boxes or in narrow width n.exc 15cm each, complete all as specified and as directed. |
| 38 | S & F in repairs 18/19 mm thick Prelaminated Particle board interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to timber frame work complete all as specified and as directed. |
| 39 | M & L for 6mm thick external teak wood lipping over 18/19mm thick particle board/plywood fixed with nails complete all as specified and as directed. |
| 40 | S&F continuous (piano) hinges mild steel, bright finish or electro galvanised width of flaps (when open)in mm 30mm complete all as specified and directed. |
| 41 | S & F hasp and staples 125mm size aluminium anodised safety type with mild steel hinge pin including bolt to hinge plate with screws complete all as specified and as directed. |
| 42 | S & F in repairs hasp and staples 125mm size aluminium anodised safety type with mild steel hinge pin including bolt to hinge plate with screws complete all as specified and as directed. |
| 43 | Supply and Fix brass Locks,4 levers for drawer, cupboard shutters size 75 mm Brass complete all as specified and directed. |
| 44 | Supply and Fix in repair brass Locks 4 levers, for drawer, cupboard shutters , size 75 mm Brass complete all as specified and directed. |
| 45 | S & F in repairs Magnet closures to cabinet cupboards complete all as specified and as directed. |
| 46 | M & L in repairs aluminium designer curtain rods (Draw berms rod) exterior grade 3 mm thick with holding clamps and fixed to wall PVC rawl plug and brass screws complete all as specified and as directed. |
| 47 | M & L for aluminium designer curtain rod end brackets complete all as specified and as directed. |
| 48 | S & F Cast Aluminium (Die cast ) body door closer hydraulically regulated, designation No.2 universal type, suitable for door shutters up to 701mm to 850 mm in width and of weight between 36 to 60 kg complete all as specified and as directed. |
| 49 | S & F in repairs Cast Aluminium (Die cast ) body door closer hydraulically regulated, designation No.2 universal type, suitable for door shutters up to 701mm to 850 mm in width and of weight between 36 to 60 kg complete all as specified and as directed. |
| 50 | M& L mild steel mortice lock vertical type size 100 mm 4 levers with stainless steel handle set suitable for right or left, inside or out side opening doors complete all as specified and as directed. |
| 51 | M& L in repairs mild steel mortice lock vertical type size 100 mm 4 levers with stainless steel handle set suitable for right or left, inside or out side opening doors complete all as specified and as directed. |
| 52 | M & L for 10 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces finished the surfaces even and smooth without using extra cement complete all as specified and directed. |
| 53 | Forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing complete with cement mortar 1:4 all as specified and as directed. |
| 54 | M & L for preparation of new plastered surface of wall and applying two coats of oil bound distemper over a coat of 1mm thick plaster of paris putty and alkali resistance primer complete all as specified and as directed. |
| 55 | Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook & pintle hinges; large hasps & staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way & three way straps, plate washers & similar small articles conforming to Fe290-0 Gde E-165 complete all as specified and as directed. |
| 56 | M & L Preparing surface of wood & wood based materials, steel & iron work, new or old, & treated with tar or coal tar black paint, area n exc 0.1 sq. m each, treating small articles such as stop, covers, gully gratings, holdfasts, ends of posts, backs of chowkats, etc. complete all as specified and as directed. |
| 57 | M&L for preparing wood and wood based materials, steel and iron work , new or old and treating ends of posts, backs of chowkats, etc., area tarred exc 0.1 sqm but n.exc 0.5 sqm each and treated with tar or coal tar black paint complete all as specified and directed. |
| 58 | S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work conforming to Fe 290-0 Gde E-165 complete all as specified and directed. |
| 59 | M & L two coat of synthetic enamel paint over one coat of red oxide primer on new steel surfaces, surfaces of any description , over 10cm width or girth not other wise described complete all as specified and as directed. |
| 60 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 61 | S&F for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with including either hooks and hinges or steel hanging door fittings exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening, necessary welding where required, conforming to FE-410-w(Gde E-250 quality A), complete all as specified and directed. |
| 62 | S&F mild steel plain black sheet 1mm thick as in steel gates and similar work, cut to size, holes punched, including round head screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including, bending, turning up mitred or angles etc as required, complete all as specified and as directed. |
| 63 | M&L in repair 2nd class hard wood Plain fillets.square,rectangular or triangular in section, exc 13sqcm and not exc 25sqcm clean sawn, secured with nails or brads complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysNov 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender