Tender For Addn/Altn To Certain Bldgs For Installation Of Sdr And Provn Of Mini High Mast Lights With Connected Items, External E/M Services To Aircraft Hangar, Servo Stabilizer For Afnet, Fountain With Connecting Accessories At Main Gate And Casing
Tender Value
42.56 Lakhs
Estimated cost
Bid Submission
17 Nov 2026
18 days left
EMD
85120
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chengalpattu → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addn/Altn To Certain Bldgs For Installation Of Sdr And Provn Of Mini High Mast Lights With Connected Items, External E/M Services To Aircraft Hangar, Servo Stabilizer For Afnet, Fountain With Connecting Accessories At Main Gate And Casing Capping And Concealment Of Service Line In Fis And Fire Alarm, Smoke Detectors & Allied Works At Afs Tambaram (8964/E8)
BOQ
| Sl. No. | Item Description |
| 1 | Taking down and removing to or from stores Chowkats or frames exceeding 1.5 Sq. M but not exceeding 4 Sq. M each (Without taking off shutters from the frame) and removing complete all as specified and directed by Engineer-in-Charge. |
| 2 | Taking down chowkats or frames with shutters (without taking off shutter from the frames) n exc. 1.5 sqm each complete all as specified and directed by Engineer-in-Charge. |
| 3 | S & F powder coated (minimum thickness of powder coating 50 micron) aluminium anodised frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing, etc complete all as specified and directed by Engineer-in-Charge. |
| 4 | M & L for 12mm thick Prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination , fixed with screws to timber frame work/alluminum work like partition or door etc complete all as specified and directed by Engineer-in-Charge. |
| 5 | S&F 5.5 mm thick sheet glass, ordinary quality, and sheet glass is ground or obscured or frosted on one side fixed in aluminium door/window/ventilator glazing with rubber beading complete all as specified and directed by Engineer-in-Charge. |
| 6 | S & F for Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified and directed by Engineer-in-Charge. |
| 7 | S & F 140 mm long floor door stopper of aluminium alloy body, and tongue, ISI marked, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed by Engineer-in-Charge. |
| 8 | S&F Brass mortice lock 4 levers, vertical type size 100 mm complete all as specified and directed by Engineer-in-Charge. |
| 9 | S & F Door closer hydraulically regulated alluminium extruded section body designation No. 3, universal type, suitable for door shutters of 851 to 1200 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed by Engineer-in-Charge. |
| 10 | M & L for brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 11 | Taking down cement plaster on wall of any description incl racking out joints for key, scrubbing with water etc. complete all as specified and directed. |
| 12 | M & L for rendering 15mm thick in cement mortor 1:4 on concrete or brick wall surfaces, finished even and smooth without using extra cement, mixed with WPC @ at 3% by weight of cement (IWPC measured and paid separately) complete all as specified and directed. |
| 13 | Supply only integral water proofing compound complete all as specified and directed by Engineer-in-Charge. |
| 14 | M & L for rendering 10mm thick in cement mortor 1:6 on Brick wall surfaces, finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 15 | M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of chalk whiting primer paint on plastered surrface complete all as specified and directed by Engineer-in-Charge. |
| 16 | M&L for preparing new plastered surfaces of walls and applying Two coats of cement based paint complete all as specified and directed by Engineer-in-Charge. |
| 17 | M & L preparation of old decorated surfaces of walls plastered or unplastered including removing by brooming down all dust, dirt and all loose scales by steel wire brushing, scrapping down smoke, soots, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coat of Oil bound distemper to walls, white or tinted complete all as specified and directed by Engineer-in-Charge. |
| 18 | M&L for complete removal of existing treatment and applying two coats of cement base paint on walls surfaces complete all as specified and directed by Engineer-in-Charge. |
| 19 | S & F for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed by Engineer-in-Charge. |
| 20 | M & L preparation of new or previously untreated surfaces of wood based material any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer-in-Charge. |
| 21 | M &L Point wiring(concealed) with 1.5 sqmm sigle core PVC insulated FRLS 1100 volts grade with copper conductor drawn in and incl non metallic rigid PVC conduit and all conduit accessories provision of MS terminal box suitable for modular frame and plates for housing modular switches / sockets / regulators etc, including 1.5 Sqmm PVC insulated multistranded copper earth continuity conductor connecting to the common earth dolly etc complete all as specified and directed by Engineer-in-Charge. Note: Rate quoted inclusive of Modular frame plates as per site requirement . (a) One light point controlled by one switch complete all as specified and directed by Engineer-in-Charge. |
| 22 | (b) One fan point controlled by one switch complete all as specified and directed by Engineer-in-Charge. |
| 23 | (c) One 3 pin 5 Amps socket outlet on same board complete all as specified and directed by Engineer-in-Charge. |
| 24 | (d) One 3 pin 5 Amps socket outlet on independent board complete all as specified and directed by Engineer-in-Charge. |
| 25 | (e) One 3 pin socket outlet 15 Amps independent with cable 2.5 Sq mm size complete all as specified and directed by Engineer-in-Charge. |
| 26 | (f) One 3 pin socket outlet 15 Amps independent with cable 4 Sq mm size complete all as specified and directed by Engineer-in-Charge. |
| 27 | M&L for Modular switch 1 way 6A, 1 modulecomplete all as specified and directed by Engineer-in-Charge. |
| 28 | M&L for Modular switch 1 way 16A, 1 module complete all as specified and directed by Engineer-in-Charge. |
| 29 | M&L for Modular socket 6 A 3 pin combined 2 module complete all as specified and directed by Engineer-in-Charge. |
| 30 | M&L for Modular socket 6A/16A 2/3 pin combined 2 module complete all as specified and directed by Engineer-in-Charge. |
| 31 | M&L for Modular white cover plate with frame , 3 modules complete all as specified and directed by Engineer-in-Charge. |
| 32 | M&L for Modular white cover plate with frame , 8 modules complete all as specified and directed by Engineer-in-Charge. |
| 33 | M&L for PVC ceiling rose three plate surface and jumpo type complete all as specified and directed by Engineer-in-Charge. |
| 34 | Supply and fix stepped modular electronic fan regulator flush 2 module 120 watt etc as per required complete all as specified and directed by Engineer-in-Charge. |
| 35 | S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete one single pole MCB 20/30 Amps, 240V complete concealed on wall and connecting with all connections all as directed by Engr in charge for AC complete all as specified and directed by Engineer-in-Charge. |
| 36 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed by Engineer-in-Charge. |
| 37 | S&F in replacement of Wall mounted light fitting LED batten, extruded aluminium heat sink provided for effcient heat dissipation & integrated electronic driver with 22 W LED (4 ft) lamp including disconecting, removing, and connecting into electric circuit and testing complete all as specified and directed by Engineer-in-Charge.(Make - Havells or equivelant) |
| 38 | S&F in replacement of security light fitting LED luminares New generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP65 roadway luminaire with high power LED as light source with 35W LED 5000K lamp including disconecting, removing, and connecting into electric circuit and testing complete all as specified and directed by Engineer-in-Charge.(Make - Havells or equivelant) |
| 39 | M&L for GI Bracket bend to shape in cold or hot 40mm bore medium grade and 1.50 M long with suitable MS clamps and nuts bolts etc, to fixing security light fittings to Bldgs complete after taking down the unsv GI bracket complete all as specified and directed by Engineer-in-Charge. |
| 40 | S&F of flood light fittings LED luminares New generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP65 roadway luminaire with high power LED as light source with 150W LED 5000K lamp including fixing arrangements like clamp, bracket etc and connecting into electric circuit and testing complete all as specified and directed by Engineer-in-Charge. |
| 41 | Supply & fixing of Vertical type sheet metal enclosure MCCB DB 4 ways double door type including 100 Amps MCCB 4 Pole 415 V,16 KA incomer with suitable bus bar surface/ concealed on wall and connecting with all connections complete all as specified and directed by Engineer-in-Charge. |
| 42 | Supply and fixing for MCB SP 06 to 32 Amps, 10KA 240 volts,50Hz complete all as specified and directed by Engineer-in-Charge. |
| 43 | Supply and fixing for MCB SPN 0- 40 Amps, 10KA 240 volts,50Hz complete all as specified and directed by Engineer-in-Charge. |
| 44 | Supply & fix fans ceiling complete with out electronic type regulator and accessories 230 V,1200 mm sweep. BLDC type, BEE 5 star rated complete all as specified and directed by Engineer-in-Charge. |
| 45 | Supply & fix Wall mounted Air Circulator fans 230 volts single phase oscillating 400 mm sweep suitable for wall mounting complete all as specified and directed by Engineer-in-Charge. |
| 46 | Material and labour for earthing complete with GI plate electrode 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of plate not less than 1.5m below ground level connected to earth lead of 4.0 mm GI wire means of bolts, nuts, washers of galvanized all as shown in electrical plate No.3 of SSR Part-I including necessary excavation and earth work. PCC 1:3:6 type C1 chamber, RCC cover in 50mm thick 1:2:4 type B1 with 8mm CTD 140mm centre to centre with suitable handle, watering pipe 20mm dia light grade pipe with funnel, charcoal salt connected to earthing test point all as specified including testing and commissioning on complete all as specified and directed by Engineer-in-Charge. |
| 47 | M&L for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/ pipe or fixed to poles or any other indicated situation for loop earthing etc. as required GI wire 4.0 mm thick for inter connecting of earth electrodes complete all as specified and directed by Engineer-in-Charge. |
| 48 | M&L for Rigid non-metallic PVC conduit of size 20mm exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. Conduit for AF Net complete all as specified and directed by Engineer-in-Charge. |
| 49 | M&L for Computer Jack/ AF Net socket modular complete all as specified and directed by Engineer-in-Charge. |
| 50 | Taking down carefully unserviceable copper/aluminium point wiring (light, fan, socket or power)complete including fixture and fitting such as switches, ceiling rose lamp holder, regulators, sockets, light fittings, wooden terminal boxes, plastic laminated sheet cover, including taking down of DB’s, meter board any type complete all as specified and directed by Engineer-in-Charge. |
| 51 | Taking down existing exhaust fan/ ceiling fan any size with due care and refixing with new lok bolt (where required) after servicing and painting including connecting electrically using PVC insulated overall sheathed flexible copper conductor cable 0.75 mm all as required and directed complete all as specified and directed by Engineer-in-Charge. |
| 52 | Taking down U/S DB/.metal clad boxes any description or size/way incl MCCB/MCBs complete all as specified and directed by Engineer-in-Charge. |
| 53 | Supply and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 120 sq mm 3.5 core complete all as specified and directed by Engineer-in-Charge. |
| 54 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required complete all as specified and directed by Engineer-in-Charge.(76 mm dia) |
| 55 | M & L for cutting of existing road/ floor/ plinth/drain for taking out/laying of cables/GI/PP-R pipes line including necessary earth work excavation and making good to match with existing surface with PCC 1:4:8 type C1 by (using 40mm graded stone aggregate) complete all as specified. |
| 56 | S&F 4 Pole MCCB 100 Amp ,50Hz, 415 V with rupturing capacity 35 KA on existing LT panel for tapping complete all as specified and directed by Engineer-in-Charge. |
| 57 | Supply, installation, testing and commisioning of Diesel Engine CPCB4 approved 20 KVA TP inbuilt with AMP panel generating 25 HP @ 1500 RPM , dirrectcoupled with 20 KVA three phase 415 Volts CG/LS Alternator and all accessories in housed in a acoustic enclosuresound proof canopy including necessary connection complete all as specified and directed by Engineer-in-Charge. DIESEL ENGINE Liquid cooled, electric start four stroke, six cylinder totally inclosed diesel engine developing 20 HP at 1500 RPM at NTP. The engine is suitable for generating set application and fitted with the following standard accessories complete all as specified and directed by Engineer-in-Charge.Flywheel to suit coupling, suitable coupling, water cooling arragment,Radiator, Lub Oil Filter, Lube Oil Pump,Fuel Pump, Hose to fuel pump, Air cleaning assembly,Residential Heavy duty silencer, Engine fitted with low lube oil presure gauges complete all as specified and directed by Engineer-in-Charge. Engine monitoring, protection and diagnostics. (i) Lube oil pressure. (ii) Coolant Temperature. (iii) Engine Speed. (iv) Hours Run. (v) Battery voltage.(vi) Common Warning. (vii) Common shut down. (viii) High coolant temperature warining and shutdown. (ix) Low lube oil pressure warning and shut down(x) Low coolant level shutdown. Please Enable Macros to View BoQ information |
| 58 | Supply, installation, testing and commisioning of Diesel Engine CPCB4 approved 20 KVA TP inbuilt with AMP panel generating 25 HP @ 1500 RPM , dirrectcoupled with 20 KVA three phase 415 Volts CG/LS Alternator and all accessories in housed in a acoustic enclosuresound proof canopy including necessary connection complete all as specified and directed by Engineer-in-Charge. DIESEL ENGINE Liquid cooled, electric start four stroke, six cylinder totally inclosed diesel engine developing 20 HP at 1500 RPM at NTP. The engine is suitable for generating set application and fitted with the following standard accessories complete all as specified and directed by Engineer-in-Charge.Flywheel to suit coupling, suitable coupling, water cooling arragment,Radiator, Lub Oil Filter, Lube Oil Pump,Fuel Pump, Hose to fuel pump, Air cleaning assembly,Residential Heavy duty silencer, Engine fitted with low lube oil presure gauges complete all as specified and directed by Engineer-in-Charge. Engine monitoring, protection and diagnostics. (i) Lube oil pressure. (ii) Coolant Temperature. (iii) Engine Speed. (iv) Hours Run. (v) Battery voltage.(vi) Common Warning. (vii) Common shut down. (viii) High coolant temperature warining and shutdown. (ix) Low lube oil pressure warning and shut down(x) Low coolant level shutdown. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysNov 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender