Water Resources and Irrigation Boards / Undertakings / PSU Closing in 6 days TDR #58237851

Tender For Nit For Repairing And Waterproofing Of Roof Of Cable Gallery, Construction Of Drain In Blower And Strengthening Of Existing Cable Racks By Providing Additional Support Of Galvanised Channel Sections In Cable Gallery At Pph And Replacement

Issued by Boards / Undertakings / PSU · Hoshiarpur, Punjab
Tender Value
13.58 Lakhs
Estimated cost
Bid Submission
25 Nov 2026
6 days left
EMD
27170
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Hoshiarpur → Punjab
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Nit For Repairing And Waterproofing Of Roof Of Cable Gallery, Construction Of Drain In Blower And Strengthening Of Existing Cable Racks By Providing Additional Support Of Galvanised Channel Sections In Cable Gallery At Pph And Replacement Of Damaged Cable Trench Covers And Repair Of Flooring At Various Locations In 220 Kv S/Yard, Talwara.

BOQ

Name of Work:- NIT for repairing and waterproofing of roof of Cable Gallery, construction of drain in blower and Strengthening of existing cable racks by providing additional support of galvanised channel sections in Cable Gallery at PPH and replacement of damaged cable trench covers and repair of flooring at various locations in 220 kV S/Yard, Talwara.
Sl. No. Item Description
1Cement concrete 1:2:4 a)With stone ballast or shingle ii) mixing by mechanical means using concrete mixer volumetric type
2Extra over item No. 10.1 to 10.13 when work is done in situ in small quantities not exceeding 0.30 cum per block in situ such as staggered blocks, arrows, concrete block over inverted filters, bed plates arches etc.
3Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete.
4Shuttering for precast and plain or Reinforced concrete blocks, wall plates, bedplates, shelves etc.
5MS CHANNELS/ FLATS:(xv) Supply and Erection of MS angle iron (Channel)/ MS Flats of suitable size with cutting, bending and necessary holes as desired by Engineer-in-charge at site:(g) MS flat iron size 50mm x 5mm thick
6Earth work containing Gravel (in loose from in non cohesive binding material) work in excavation with occasional use of picks exclusive of compensation of earth undressed with combined lead upto 15 metres with percentage of gravel or Kankar. (a) Exceeding 40 % but upto 60 %.
7Conglomerate floor 40mm thick cement concrete 1:2:4 on 100mm thick cement concrete 1:8:16 with stone aggregate 40mm gauge and 100mm fine sand filling. using mechanical mixer for mixing of material.
8Providing and fixing 10mm thick acid and/or alkali resistant tiles 300 mm x 300 mm of approved make and colour using acid and/or alkali resisting mortar bedding and joints filled with acid and/or alkali resisting cement as per IS : 4457 complete as per the direction of Engineer-in- Charge, in flooring or in dado / skirting on a bed of 12 mm thick mortar 1 : 4 (1 acid proof cement: 4 coarse sand).
9Dismantling of wall tiles at any floor of the building, laid in cement mortar including scraping of cement plaster and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect.
10Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 600 x 300 mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
11Dismantling of floor tiles at any floor of the building, laid in cement mortar including dismantling of cement concrete base and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect.
12Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm and matching pigment etc., completewhite cement slurry in joints including corners angles and beading.
13Nicking cement concrete surface (over 28 days old including preparation and laying slurry.
14Dismantling existing drains of different size cunnets, section only excluding recovery of all useable materials, stacking the same within 100 metre from site of dismantled works and disposal of all rubish off site of works.(a) House connection drains.
15First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level
1612.5 mm thick cement plaster 1:4
17Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications.75mm o/d pipe of 6 Kgf. / sqcm
18Waterproofing of wet areas ( Concrete/ Masonary Surface ) and any water retaining structures such as swimming pools, water tanks, Bathrooms, toilets, balconies, planters etc with high performance polymer modified cementitionous coating ( DR. FIXIT FASTFLEX / Equivalent ) to provide tough film build-up and highly elastic film formation, which accommodates thermal movements so as to provide seamless coating without any joints to prevents water leakage. The scope of work also includes surface prepration and cleaning, washing and removing dust,dirt and loose particles from concrete / masonary surface complete in all respects.
19Centering and shuttering for faces of walls, partitions, retaining walls and the like (vertical or battering including attached pilasters buttresses etc.
20Dismantling concrete (d) Cement Concrete plain 1:2:4 mix
21Cement concrete 1:3:6 (a) with stone ballast 20mm gauge (ii) mixing by mechanical means using concrete mixer volumetric type
22Filler Joint(iii) Providing and fixing in position 20 mm thick premoulded joint filler in expansion joint for fixed ends of simply supported spans not exceeding 10 m to cater for a horizontal movement upto 20 mm, covered with sealant complete as per drawing and technical specifications.
23Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge.
24Providing surface treatment to external / internal wall with water resistant grade, anti fungal, anti rusting, antifoaming, high percentage acrylic binder washable surface with two coats to be provided with spatula over one coat cement primer including preparation of surface with water resistant grade match colour complete as per specifications and to the entire satisfaction of engineer- in- charge.
25Providing and applying crystalline mortar by mixing in the ratio of 4.5:1(4.5 parts crytalline mortar: 1 part water) for the treatment of faulty construction joints,cracks, tie rod holes and spalled & honeycombed surface of RCC underground structures like basement, water tanks, bridge deck etc. to ensure water tightness. The crystallie mortar shall conform to the EN 1504-3 having compressive strength Class R4 ?45 MPa and adhesive bond strength Class R3?1.5 MPa. The work shall be carried out all complete as per specification and the direction of the Engineer-In-Charge. The Product performance shall carry guarantee for 10 years against any leakage For sealing cracks and faulty construction joints , routed out/making U-shape groove size 25x25mm and then primed the area with integral crytalline slurry @ 0.05kg/running metre and while the surface is tacky filled the groove upto surface with crytalline mortar @1.50kg /running meter. Once crytalline mortar is touch dry then finally applied two coats of integral crytalline slurry @ 0.05kg/running meter per coat.
26Structural steel work in compound girders or Stanchions built up from two or more R.S. joists or channel section or plates & angles etc. including cutting and fixing all lattice bars, stiffeners, gusset plates, bolts, nuts, rivets, welding rod, etc. complete with flange plates, heads, sole plates, angle connections, etc. with hoisting and erecting in position.
27Galvanisation of Structural steel work in compound built up girders or stachions built up from two or more R.S. joists or channel sections or plates and angles etc. Riveted or welded , including cutting and fixing all lattices bars , stiffeners, gusset plates, bolts, nuts, Rvets , welding rods , etc. complete with flange plates heads sole plates , angle connections, etc. with hoisting and erecting in position(80 micron)
28Carriage over short distance of small consignments, upto 2.0 qtls in weight including loading, un-loading and stacking. (b) 2.0 km Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58237851
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE 13.58 Lakhs
LAST DATE 25-11-2026
Authority
Authority Name Bhakra Beas Management Board
Work Description Tender for Nit For Repairing And Waterproofing Of Roof Of Cable Gallery, Construction Of Drain In Blower And Strengthening Of Existing Cable Racks By Providing Additional Support Of Galvanised Channel Sections In Cable Gallery At Pph And Replacement Of Damaged Cable Trench Covers And Repair Of Flooring At Various Locations In 220 Kv S/Yard, Talwara.
Basic Detail
Tender No 36/REPPH BBMB
Bidding Type Tender
Location
City Hoshiarpur
State Punjab
Key Dates
Publish Date 28 Oct 2026
Submission Date 25 Nov 2026
Open Date 27 Nov 2026
Finance
Tender Value 13.58 Lakhs
Tender Fee Ref. Documents
EMD 27170
Exemption Not Available
Document List
9dbbd923-60e4-4bdb-b03f-e964e78d4b8c.html
BOQ_344842.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Oct 28, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 25, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 6 days
Nov 27, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 8 days

Tender Documents

Download All (ZIP) ↓
html

9dbbd923-60e4-4bdb-b03f-e964e78d4b8c.html

xls

BOQ_344842.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender