Tender For Day To Day Maintenance Works In Te Compound At Haldwani, Nainital For Four Months.
Tender Value
2.49 Lakhs
Estimated cost
Bid Submission
09 Nov 2026
11 days left
EMD
4993
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nainital → Uttarakhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Day To Day Maintenance Works In Te Compound At Haldwani, Nainital For Four Months.
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 2 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 3 | Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) |
| 4 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.. |
| 5 | In cement mortar |
| 6 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead: |
| 7 | Of area 3 sq. metres and below |
| 8 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 9 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. |
| 10 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 11 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 12 | 1:2:4 (1 Cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources). |
| 13 | 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 14 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : |
| 15 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 16 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. |
| 17 | Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 18 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: |
| 19 | Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 20 | Deduct for not providing hinges in doors, windows or clerestory window shutters with : |
| 21 | ISI marked Stainless steel butt hinges with stainless steel screws : For 2nd class teak wood and other class of wood shutters |
| 22 | ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. For 2nd class teak wood and other class of wood shutters |
| 23 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: |
| 24 | 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 25 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : |
| 26 | 30 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size - Kiln seasoned selected class of sheesham wood |
| 27 | Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets : |
| 28 | 20 mm dia (heavy type) |
| 29 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
| 30 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : |
| 31 | 250x16 mm |
| 32 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 33 | 250x10 mm |
| 34 | Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 35 | 125 mm |
| 36 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. |
| 37 | Twin rubber stopper |
| 38 | Structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete |
| 39 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. |
| 40 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 41 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kgper sqm including pointing the joints with white cement mixed with pigment of matching shade complete. |
| 42 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300mm or more (thickness to be specified by the manufacturer), of 1stquality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4(1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. |
| 43 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| 44 | 75 mm diameter |
| 45 | 110 mm diameter |
| 46 | Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in-Charge. |
| 47 | 12 mm cement plaster of mix : |
| 48 | 1:6 (1 cement: 6 coarse sand) |
| 49 | 15 mm cement plaster on rough side of single or half brick wall of mix : |
| 50 | 1:6 (1 cement: 6 coarse sand) |
| 51 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer, of required shade and colour all complete : |
| 52 | New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre |
| 53 | Finishing walls with Acrylic Smooth exterior paint of required shade : |
| 54 | New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) |
| 55 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
| 56 | Two or more coats on new work. |
| 57 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: |
| 58 | Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. |
| 59 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and of required shade and colour complete to give and even shade. |
| 60 | Old work (one or more coats) |
| 61 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 62 | One or more coats on old work. |
| 63 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-harge. |
| 64 | With cement mortar 1:4 (1cement: 4 coarse sand). |
| 65 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: |
| 66 | Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). |
| 67 | Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. |
| 68 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required : |
| 69 | W.C. pan with ISI marked white solid plastic seat and lid |
| 70 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board |
| 71 | 610x460 mm bowl depth 200 mm. |
| 72 | Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. |
| 73 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. |
| 74 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
| 75 | 10 litre capacity - White |
| 76 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : |
| 77 | White solid plastic seat with lid |
| 78 | Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan. |
| 79 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. |
| 80 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : |
| 81 | Flat back wash basin of size 550x400 mm. |
| 82 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe |
| 83 | 32 mm dia |
| 84 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : |
| 85 | Rectangular shape 453x357 mm |
| 86 | Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. |
| 87 | Waste coupling 38 mm dia of 83 mm length and 77 mm breadth, weighing not less than 60 gms. |
| 88 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall |
| 89 | 15 mm nominal outer dia. Pipes. |
| 90 | 20 mm nominal outer dia. Pipes. |
| 91 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. : Internal work – Exposed on wall. |
| 92 | 15 mm dia. nominal bore |
| 93 | 20 mm dia. nominal bore |
| 94 | 25 mm dia. nominal bore |
| 95 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. : External work |
| 96 | 32 mm dia. nominal bore |
| 97 | 40 mm dia. nominal bore |
| 98 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
| 99 | 25 mm nominal bore |
| 100 | 20 mm nominal bore |
| 101 | 32 mm nominal bore. |
| 102 | 40 mm nominal bore |
| 103 | Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length |
| 104 | 15 mm nominal bore |
| 105 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) |
| 106 | 15 mm nominal bore |
| 107 | 20 mm nominal bore |
| 108 | 25 mm nominal bore |
| 109 | 32 mm nominal |
| 110 | 40 mm nominal bore |
| 111 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 112 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931: |
| 113 | 15 mm nominal bore. |
| 114 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. |
| 115 | 15 mm nominal bore |
| 116 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 : |
| 117 | 15mm nominal bore |
| 118 | Providing and fixing PTMT bib cock of approved quality and colour. |
| 119 | 15mm nominal bore, 90 mm long. Weighing not less than 93 gms. |
| 120 | Providing and fixing PTMT pillar cock of approved quality and colour . |
| 121 | 15mm nominal bore, 125 mm long foam flow. Weighing not less than 120 gms. |
| 122 | Providing and fixing PTMT grating of approved quality and colour. Circular type. |
| 123 | 100 mm nominal dia. |
| 124 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. |
| 125 | 15 mm nominal bore, 105 mm long. Weighing not less than 138 gms. |
| 126 | Providing and fixing PTMT angle stop cock 15 mm nominal bore. Weighing not less than 85 gms. |
| 127 | Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc. |
| 128 | Supplying of unskilled labour for miscellaneous maintenance works as per direction of Engineer-in-charge. |
| 129 | Providing and fixing double scaffolding system for repair works on the exterior/interior side or as required, upto four storey height made with bamboos 1.50 m c/c horoizontal and vertical bamboos along with challies tied with ropes & wires with suitable climbing ladders and working platforms, including, maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge .Note:- (1) The elevational area of the scaffolding shall be measured for payment purpose. (2) The payment will be made once only for execution of all items for such works. |
| 130 | Hiring electic welding machine at site including cost of operator and electrodes as per the direction of E-in-c. |
| 131 | Providing and fixing PVC sheet with adhesive / screws, nails at back of flush door shutters as per direction of Engineer-in-charge. |
| 132 | Providing and fixing wire mesh of average width of aperture 1.40 mm and nominal diametre of wire 0.63 mm in wooden doors and windows with wooden fillets complete as per direction of Engineer-in-charge |
| 133 | Repair of brass/CP brass bib cock, stop cock, pillar cock etc by replacement of washers etc as per direction of Engineer-in-charge. |
| 134 | Supplying of spindles of CP brass bib cock, pillar cock, angle cock etc of approved quality |
| 135 | Providing and fixing 15 mm nominal bore GI socket, elbow, tee and nipple of approved quality |
| 136 | Providing and fixing PVC tank cover of approved quality as per direction of Engineer-in-charge. |
| 137 | Removal of chokage/leakage of floor traps, P traps, C.I. pipe etc and applying Dr Fixit wherever required as well as diposal of rubbish complete as per direction of Engineer-in-charge. |
| 138 | Cleaning of manhole including connecting sewerline by complete removal of rubbish etc and its disposal complete as per the direction of the Engineer-in-Charge. |
| 139 | Removal of sludge by mechanical means from septic tank and cleaning the same in land and around with water and disposal of sludge out side the compound at the authorized municipal dump or out of the township complete as per the direction of the Engineer-in-Charge. |
| 140 | upto 12cum sludge capacity |
| 141 | Credit of old unservicable material obtained during dismantling |
| 142 | wooden door and window of size up to 3 sqm |
| 143 | Mild steel sections , G.I. pipes etc |
| 144 | Brass/CP brass bib cock, stop cock, pillar cock, gate valve etc |
| 145 | 500 litre PVC water storage tank |
| 146 | Refixing of dismembered aluminium partition, glass panes and particle board in the required new position,(excluding doors & windows) making into required shape & size as per site conditions including cost of rubber gasket,cleats, labour steel screws,etc. wherever required all complete, and as per the direction of Engineer-in Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysNov 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender