Tender For Providing New Earthing Sets, Replacement Of Verandah Lighting Cable Alongwith Junction Boxes And Petty Electrical Repair & Maintenance Works At Fsd Jamshedpur Under Do Ranchi
Tender Value
2.55 Lakhs
Estimated cost
Bid Submission
07 Nov 2026
8 days left
EMD
5110
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
East Singhbum → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing New Earthing Sets, Replacement Of Verandah Lighting Cable Alongwith Junction Boxes And Petty Electrical Repair & Maintenance Works At Fsd Jamshedpur Under Do Ranchi
BOQ
| Sl. No. | Item Description |
| 1 | Supply of following type of XLPE POWER CABLE of 1.1 kv grade armoured Al. cable compulsoryISI mark confirming to IS:7098/ PART –I / 88 with amendment no.1 as required. |
| 2 | CABLE SIZE 3 X 6 SQ.MM |
| 3 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KVgrade of following size on wall surface as required. |
| 4 | Upto 35 sq. mm (clamped with 1mm thick saddle) |
| 5 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. |
| 6 | For 2X6 sq mm |
| 7 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existingsurface/ recessed conduit/ submain wiring/ cable as required. |
| 8 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 Meter long etc. with charcoal/ coke and salt as required. |
| 9 | Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required. |
| 10 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. |
| 11 | Supplying, installation, testing and commissioning of 40 W integrated LED Well Glass luminaries comprising of die cast canopy and gear housing, IP66, efficacy 120 LWP, with M.S. Clamps and G.I. nuts and bolts with washers as required. |
| 12 | Installation, Testing and Commissioning of ceiling fan, including wiring the down rods of standardlength (upto 30 cm) with 1.5 sq. mm FRLS/HFFR PVC insulated, copper conductor, single core cableetc. as required |
| 13 | Supplying and fixing of Hot pressed moulded SMC Junction box of size 195mm x 135mm x 90mmwith 4 way Strip connector 63A etc. as required at the site of work. |
| 14 | LED Batten light (System lumen efficacy ≥105 <120 lm/Watt). Supplying, Installation, Testing &Commissioning of LED surface mounted Batten light of following body material and construction asper IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85%,Operating voltage AC 140- 270 Volt, frequency 50/60 hz, Operating temp range -5 °C to 40 °C,internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10%, P. F.≥0.95,IP20, CRI >80, Flicker free, (flicker should be below 5 %), life time (LED, Driver & electricalcircuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation ColourMatching) <3, Maximum power consumption should not more than the specified rating and Fixtureshall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screenprinting on housing. complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR,PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 yearOEM warranty. System lumen efficacy ≥105 <120 lm/Watt output . LM79 & LM80 Test report andall testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be asapproved by Engineer-in- Charge as per requirement. (Thermal management: heat sink of aluminiumhousing such that LED junction temperature shall not rise above 90°C). Powder coated die cast/Extruded aluminium Body (Thickness > 1.20 mm) |
| 15 | 18-22 Watt |
| 16 | 40 Watt |
| 17 | Providing and fixing insulating Rubber Mat of 6 mm thick on the the floor |
| 18 | Less credit for dismantaled old damaged 20-40W LED batten Fitting |
| 19 | Less credit for dismantaled old dismantled 2x6 XLPE Al cable. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysNov 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender