Tender For Rehabilitation And Upgradation Of Talegaon Dabhade Chakan Shikrapur Nhavre Shrigonda Jalgaon Jamkhedpatoda Manjarsumba Kaij Ambajogai Kingaon And Terminating With Nh.36 At Chakur Nh.548 From Km. 195/375 To 208/775 (Section Jamkhed To Sauta
Tender Value
6.59 Lakhs
Estimated cost
Bid Submission
04 Nov 2026
6 days left
EMD
6600
Bank guarantee accepted
Document Fee
2360
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nashik → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Rehabilitation And Upgradation Of Talegaon Dabhade Chakan Shikrapur Nhavre Shrigonda Jalgaon Jamkhedpatoda Manjarsumba Kaij Ambajogai Kingaon And Terminating With Nh.36 At Chakur Nh.548 From Km. 195/375 To 208/775 (Section Jamkhed To Sautada) On Epc Basis (Road Safety Work).
BOQ
| Sl. No. | Item Description |
| 1 | Item No. 1 :- Metal Beam Crash Barrier -- Type - A, W : Metal Beam Crash Barrier (Providing and erecting a W metal beam crash barrier comprising of 3 millimetre thick corrugated sheet metal beam rail, 70 centimetre above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 millimetre spaced 2 m center to center, 1.8 m. high, 1.1 m. below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 millimetre, 330 millimetre long complete as per clause 810). |
| 2 | Item No. 2 :- Open graded Premix Surfacing- Providing and Laying Open graded carpet 20 millimetre thickness composed of 13.2 to 5.6 millimetre aggregates premixed with bituminous binder transported to site with VTS, laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction but excluding prime / tack and Seal coat. For Bitumen of specified grade--USING drum mix type hot mix plant with SCADA, Paver and Vibratory roller (Over MPM Surface) (VG-30 bulk bitumen rates are considered to arrive at rates). |
| 3 | Item No. 3 :- Providing selected hard murum filling including laying in layers of 15 to 20 centimetre with watering and compacting etc. complete. |
| 4 | Item No. 4 :- Supplying and fixing of Molded Shank Raised Pavement Markers / Cat's Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 Kilogramme tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97 DO III Date 11.06. 1997. The height, width and length shall not exceed 50 millimetre, 100 millimetre and 102 +/- 2 millimetre and with minimum reflective area of 13 Square centimetre on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2 millimetre and height not less than 30+/- 2 millimetre) from the body is to be a minimum value of 500 Kg. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer. The contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer. |
| 5 | Item No. 5 :- Road Marking with Hot Applied Thermoplastic Compound with Reflectorizing Glass Beads on Bituminous Surface- Providing and laying of hot applied thermoplastic compound 2.5 millimetre thick including Reflectorizing glass beads @ 250 grams per sqm area, thickness of 2.5 millimetre is exclusive of surface applied glass beads as per IRC:35.The finished surface to be level, uniform and free from streaks and holes complete. |
| 6 | Item No. 6 :- Providing Vertical Delineator having wide angle cube corner micro prismatic non metallic reflective sheeting confirming to Type XI of ASTM D4956 -09 with White Color and Red Color combination and having minimum of retro reflective exposed area of 125 Square centimetre on top slots and 35 Square centimetre on bottom slots and no edges shall be exposed for tampering. This tubular delineator shall have a core and shell construction, shell shall be made of tough, high impact resistant, injection-molded, thermoplastic outer body and the inner core shall consist of powder coated or painted mild steel of minimum thickness 1.0 millimetre and core-shell structure shall be of height not less than 800 millimetre above the ground and width not less than 80 millimetre The metallic core of the delineator shall extend 300 millimetre beyond the shell length from bottom for installing in the ground. The extended portion shall have slots to insert anchoring rods for enhancing the concrete grip. The logo of the manufacturer shall be embossed on either side of the body in the injection molding process. The engineering thermoplastic used for making the delineator body shall have minimum initial mechanical properties of 600 J/m tested in accordance with ASTM D256 and shall retain at least 70% of these minimum initial values. |
| 7 | Item No. 7 :- Providing and fixing Cautionary/Warning sign boards in Equilateral Triangle size of millimetre made out of millimetre aluminum sheet bonded with white retro reflective sheeting of Class C (Type XI Micro prismatic grade sheeting) having pressure sensitive/heat activated adhesive retroreflective specified back ground, border and back side retroreflective symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3 Supported with back support frame 25 x 25 x 3 millimetre, duly painted on back side with grey stove enamel paint and supported on one No. of mild steel angle iron post of size 65 x 65 x 6 millimetre, 3.45 metre long, duly painted with flat oil paint having alternate black and white bands of 25 centimetre width including galvanised iron fixtures etc. fixing the boards in M.25 grade concrete block of size 60 x 60 x 75 centimetre including transportation etc. complete. Class-C (Type XI Micro prismatic grade sheeting) shall have 10 years written warranty from the manufacturer and authorised distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier. |
| 8 | Item No.8 :- Providing and fixing Cautionary/Warning sign boards in Equilateral Triangle size of millimetre made out of millimetre aluminum sheet bonded with white retro reflective sheeting of Class B (Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure sensitive/heat activated adhesive retroreflective specified back ground, border and back side retroreflective symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3 Supported with back support frame 25 x 25 x 3 millimetre, duly painted on back side with grey stove enamel paint and supported on one No. of M.S. angle iron post of size 65 x 65 x 6 millimetre, 3.45 metre long, duly painted withflat oil paint having alternate black and white bands of 25 centimetre width including galvanised iron fixtures etc. fixing the boards in M.25 grade concrete block of size 60 x 60 x 75 centimetre including transportation etc. complete. Class B (Type IV High intensity micro-prismatic grade sheeting-HIP) shall have 7 years written warranty from the manufacturer and authorised distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier. |
| 9 | Item No.9 :- Providing and fixing Cautionary/Warning sign boards in Octagon size of millimetre made out of millimetre aluminum sheet bonded with white retro reflective sheeting of Class B (Type IV High intensity micro- prismatic grade sheeting-HIP) having pressure sensitive/heat activated adhesive retroreflective specified back ground, border and back side retroreflective symbols, letters, numerals, arrow as per IRC:67-2012 Table No. 8.3 Supported with back support frame 25 x 25 x 3 millimetre, duly painted on back side with grey stove enamel paint and supported on one No. of M.S. angle iron post of size 65 x 65 x 6 millimetre, 3.45 metre long, duly painted with flat oil paint having alternate black and white bands of 25 centimetre width including galvanised iron fixtures etc. fixing the boards in M.25 grade concrete block of size 60 x 60 x 75 centimetre including transportation etc. complete. Class B (Type IV High intensity micro-prismatic grade sheeting-HIP) shall have 7 years written warranty from the manufacturer and authorised distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier. |
| 10 | Item No.10 :- Royalty charges for various materials. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender