Tender For Installation Of New Production Well Along Of Pumping Arrangement At Budhalinga Ward No - 12,08,10,Esi Medical,13 In Choudwar Municipality.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
05 Nov 2026
4 days left
EMD
40000
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Cuttack → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Installation Of New Production Well Along Of Pumping Arrangement At Budhalinga Ward No - 12,08,10,Esi Medical,13 In Choudwar Municipality.
BOQ
| Sl. No. | Item Description |
| 1 | (A) Installation of new production well |
| 2 | Supplying all materials,labour ,t&p and drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rigs or combination drilling rigs (1200 cfm/ 300 psi) as required to suit the site condition as per the direction of Engineer-in-charge including use of own rigs with its accessories, tools and plant and consumables etc for lowering of 200 mm dia PVC/GI pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (GI/PVC casing pipes if required to prevent collapse of over burden is to be provided by the contractor including lowering and withdrawing after completion of the tube well). |
| 3 | 200mm dia bore from 0 to 30 mtr, 200 mm dia bore 30 mtrs to 150 mtrs |
| 4 | Supplying all, labour,t&p for slot cutting in pvc pipe as per specification with lead all materials to site. (Provisional) |
| 5 | Supply of all labour & T&P for lowering the following size G.I./PVC pipes with or without slotted pipes as per the necessity from ground level and fitted and fixed up in perfectly vertical position, including cutting and threading pipe and slotted pipe and fixing all jointing materials etc.complete and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above excluding cost of fittings & jointing materials. |
| 6 | Supplying all materials labour and T&P and grouting with cement slurry for sanitary sealing in the bore around the upper most 3 mtrs of 100 dia PVC casing pipe properly as per the direction of Engineer-in-Charge. |
| 7 | Cleaning and developing the production well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per the direction of Engineer-in-Charge. |
| 8 | Supplying all labour, t&p and earth work in excavation of all kinds of soil within 50m intial lead and1.5m initial lift including rough dressing and breaking the clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth as per direction of engineer in charge. |
| 9 | Supplying all materials, labour, t&p for filling sand infoundation and plinth, watered and rammed with lead of all materials to site. |
| 10 | Supplying all materials, labour, t&p and providing cement concrete (1:4:8) using 40mm size c.b.h g metal including hoisting, laying and curing with ead of all materials to site. |
| 11 | Supplying all materials, labour, t&p and providing cement concrete (1:2:4) using 12mm size c.b.h. g chips including hoisting, laying and curing with ead of all materials |
| 12 | Supplying of following materials for installation of production well including testing with lead of all materials to site. |
| 13 | 200mm dia ASTM PVC pipe (sch-80) |
| 14 | 200mmx600mm pvc short piece |
| 15 | 200mm dia PVC top cap |
| 16 | 200mm PVC conical plug |
| 17 | Supplying all materials, labour, tools and plant and withdrawing casing pipe from the unsuccessful bore and depositing in the departmental store in good condition. |
| 18 | Pumping Arrangement |
| 19 | Recessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp, 250 V piano type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth with lead of all materials to site.( Polycab / Havels / V Guard ).Light point Group A |
| 20 | Recessed wiring for light / power plug with 2 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit alongwith 1 x 1.5 sq.mm F.R.P insulated single core multistrand copper conductor for loop earthing with lead of all materials to site.. |
| 21 | Recessed wiring to submain in 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of I S I marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as required. |
| 22 | Supplying all materials, labour.t & p and wiring in existing surface/ conduit with insulated single core 4mm2 multistand copper conductor as required. |
| 23 | Supplying all materials, labour, t&p and fitting & fixing 100 Amp 6 way Bus Bar inside chamber. |
| 24 | Supplying all materials, labour.t & p and fitting and fixing 100 amp kit kats with lead of all materials to site.. |
| 25 | Supply, Installation, Testing, of 63 Amp TPN Main switches of following capacity (IS 13940 Part 3/1993 ) on existing surface/wall mountnting including interconnections, earthing, etc. as required as per direction of Engineer in Charge. |
| 26 | Supply of 3H.P three phase vertical submersible pump set having discharge 10cum/hr at 45m head including testing with lead of all materials to site. |
| 27 | Supplying of all labour , t&p and installation of 3H.P three phase vertical submersible pump set having including testing with lead of all materials to site. |
| 28 | Supplying, fitting and fixing of D.O.L control pannel of BCH/LT make for running of 3 H.P three phase vertical submersible pump set including all taxes and charges as per following accessories and testing. Auto/manual-selector switch switch, contactor, over load relay (3.8-6Amp), Single Amp meter with ,Volt meter, phase indicator lamp and push botton switch. CT coil fixed inside metal box wit short circuit protection. |
| 29 | Supplying all materials, labour, t &p and making cable joints and testing motor as per direction of engineer in charge. |
| 30 | Supplying all materials, labour.t & p and fitting and fixing 2.5mm2 three phase submersible flat cable including testing |
| 31 | Supplying all materials, labour, t&p and earthing with G.I earth pipe 3meter long 40 mm dia ISI marked including accessories and providingmasonary enclosure with cover plate having locking arrangment and watering pipe etc with charcoal and salt as required |
| 32 | Supplying all material, labour, t&p and laying 2.24mm dia bare copper wire as running earth and testing with lead of all materials to site. |
| 33 | Supplying all materials, labour, t&p and installation of timer switch of solid state electric control with on & off set point per circuit for delay schedule timing so as to automate the running of motor.The timing and set point shall be to nearest minute with suitable to function from 3 H.P to 30H.P range submersible motor at supply voltage 370 to 415 volt for three phase including testing. |
| 34 | Supplying all materials, labour.t & p and fitting and fixing 250mm dia x 10mm thick M.S cover with nut bolt. |
| 35 | Supplying all materials, labour, t&p and fixing following galvanised mild steel tubes for making tripod including gas cutting , welding and testing as per specification all complete. |
| 36 | 25mm dia G.I pipe( medium class) |
| 37 | 80mm dia G.I pipe( medium class) |
| 38 | 20mm dia M.S rod hook with Nut&bolt |
| 39 | Cutting M.S pipe up 6mm thick |
| 40 | Fillet welding to M.S pipe up 6mm thick |
| 41 | Supplying all materials, labour, t&p and fixing galvanised mild steel tubes conforming to ( IS.1239 Part-1) & M.S specials, cutting, fabricating, welding pipes with existing pipe line/ laying, testing as per P.H specification and direction of engineer in charge. all complete with lead of all materials to site. |
| 42 | 80mm dia G.I pipe (Medium class) |
| 43 | 100mm dia G.I pipe (Medium class) |
| 44 | 80mm dia M.S flange |
| 45 | 80mm dia M.S bend |
| 46 | 100mm dia M.S flange |
| 47 | 100mm dia M.S offset bend |
| 48 | 100mm x100mm dia flanged M.S Tee |
| 49 | 100mm x80mm dia M.S Reducer |
| 50 | Cutting M.S pipe up 6mm thick |
| 51 | Fillet welding to M.S pipe up 6mm thick |
| 52 | Supplying all materials,labour and T&P and making flanged joints for P.V.C./G.I pipes and specials of the following diameter including testing of joints as per specification all complete. |
| 53 | 80mm dia flanged joint. |
| 54 | 100mm dia flanged joint. |
| 55 | Supplying all materials,labour and T&P for fixing of cast iron Air valve for water works purposes of the following diameter including drilling the water main (cast iron pipes with metal straps). 25mm dia C.I air valve. |
| 56 | Supplying all materials, labour, t&p and fixing of cast iron N.R valve with double flanged ends for water works purposes of the following rating and diameter including testing of joints as per specification all complete. 100mm dia C.I N.R valve(P.N-1.6) |
| 57 | Supplying all materials,labour and T&P for fixing of cast iron sluice valve or non-return valve with double flanged ends for water works purposes of the following rating and diameter diameter including testing of joints as per specification all complete.100mm dia C.I sluice valve(P.N-1.6) |
| 58 | (B) Construction of 1 No Pump House (4mx3m) |
| 59 | Supplying all labour, t&p and earth work in excavation of all kinds of soil within 50m intial lead and1.5m initial lift including rough dressing and breaking the clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth as per direction of engineer in charge. |
| 60 | Supplying all materials, labour, t&p and providing cement concrete (1:3:6) using 40mm size c.b.h g metal including hoisting, laying and curing with lead of all materials to site. |
| 61 | Supplying all materials, labour, t&p and providing brick work with fly ash bricks of size 25cmx12cmx8cm having crushing strength not less than 75kg/sqm in cement mortar (1:6) in foundation and plinth including curing with lead of materials to site. |
| 62 | Supplying all materials, labour, t&p and filling with excavated materials in foundation and plinth, well watered and rammed with lead of all materials to site. |
| 63 | Supplying all materials, labour, t&p and filling sand in foundation and plinth, well watered and rammed with lead of all materials to site. |
| 64 | Supplying all materials, labour, t&p and providing cement concrete (1:2:4) using 12mm size c.b.h. g chips including hoisting, laying and curing with lead of all materials to site. |
| 65 | Suppling all materials, labour, t&p and providing M20 using 20mm size c.b. h.g chips including hoisting, laying, compacting and curing with lead of all materials to site. |
| 66 | Supplying all materials, labour, t&p and providing m.s reinforcement for R.C.C work including cutting, bending, binding and tying grills and placing inposition including cost of binding wire 18 to 20gague with lead of all materials to site. |
| 67 | Supplying all materials, labour, t & p and providing rigid and smooth centering and shuttering for R.C.C. works including false works and dismantling then after casting complete in ground floor. |
| 68 | R.C.C. floor, roof slab, landing, balconies, chajjas. |
| 69 | R.C.C. foundation and plinth-band, column base. |
| 70 | R.C.C.beams, columns,griders and bressmere etc. |
| 71 | R.C.C.lintels |
| 72 | Supplying all materials, labour, t&p and providing brick work with fly ash bricks of size 25cmx12cmx8cm having crushing strength not less than 75kg/sqm in cement mortar (1:6) in superstructure including curing with lead of materials to site. |
| 73 | Supplying all materials, labour, t&p and providing 12mm thick cement plaster in (1:6) over brick work including curing with lead of all materials to site. |
| 74 | Supplying all materials, labour, t&p and providing 6mm thick cement plaster in (1:4) over R.C.C work in cealing including curing with lead of all materials to site. |
| 75 | Supplying all materials, labour, t&p and fixing tiles (non glazed tile vertified) in floors,treads of steps and landing on 25mm thick bed of cement mortar (1:1) jointed with neat cement slury mixed with pigment to match the shades of the tiles with lead of all materials to site. |
| 76 | Supplying all materials, labour, t&p and providing 2.5cm. thick grading concrete with C.C(1:2:2) on roof slab with 6mm. size c.b h.g chips on new work including curing with lead of all materials to site. |
| 77 | Supplying all materials, labour, t &p and fitting & fixing of M.S.Door, window and grill gate etc. all complete. |
| 78 | Supplying all materials, labour, t&p and fitting and fixing of precast ventilator of 0.60m x 0.60m including all cost, taxes etc. all complete |
| 79 | Supplying all materials, labour, t&p and finishing walls with Weather coat paint of approved shade on new work two coats over one coat of priming to give an even shade with lead of all materials to site as per direction of Enginer in charge. |
| 80 | Supplying all materials, labour, t&p and painting two coats with plstic emulsion paints over one coat of priming with lead of all materials to site. |
| 81 | Supplying all materials, labour, t&p and painting two coats with enamel paints over a coat of primer including supply of paints etc. all complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysNov 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender