Tender For Providing Of 03 X Toilet And Bathroom Blocks At Fazilka Mil Stn
Tender Value
39.15 Lakhs
Estimated cost
Bid Submission
17 Nov 2026
16 days left
EMD
78300
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Fazilka → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Providing Of 03 X Toilet And Bathroom Blocks At Fazilka Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | Surface dressing not exc.15 cm deep in soft/loose soil complete all as specified. |
| 2 | Excavation in trenches, not exceeding 1.5 metre wide and not exceeding 1. 5 metre in depth; for foundation or for manholes not exceeding 10 Sqm on plan and not exceeding 1.5 metre in depth and getting out in soft/loose soil complete all as specified and directed by the Engineer-in-Charge. |
| 3 | Excavation in trenches, not exceeding 1.5 metre wide and exceeding 1. 5 metre in depth; for foundation or for manholes not exceeding 10 Sqm on plan and not exceeding 3.0 metre in depth and getting out in soft/loose soil complete all as specified and directed by the Engineer-in-Charge. |
| 4 | Returning filling in, including spreading, levelling, watering and well ramming in layers each not exceeding 25 cm depth in soft/loose soil complete all as specified and directed by the Engineer-in-Charge. |
| 5 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point |
| 6 | M&L Sand filling under floors or in foundations including watering and consolidation |
| 7 | M&L for treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area |
| 8 | M&L for treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) |
| 9 | M&L for treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface |
| 10 | M&L for treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area |
| 11 | M&L for treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall |
| 12 | M&L for cement concrete 1:4:8 type D2 (using 40mm graded aggregate) as in foundations, filling and mass concrete complete all as specified. |
| 13 | M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified. |
| 14 | All as per Srl item No. 13 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified. |
| 15 | M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished surface complete all as specified. |
| 16 | M&L for formwork square or rectangular to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surface complete all as specified. |
| 17 | M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for rough finished surface complete all as specified. |
| 18 | M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (horizontal or sloping) for rough finished surface complete all as specified. |
| 19 | M&L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc. 10cm but n exc. 20cm wide for rough finished surface complete all as specified. |
| 20 | M&L RCC M-25 (Design mix) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified. |
| 21 | M&L RCC M-25 (Design mix) as in columns, pillars, piers, posts and struts etc. complete all as specified. |
| 22 | M&L RCC M-25 (Design mix) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified. |
| 23 | M&L RCC M-25 (Design mix) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified. |
| 24 | M&L 14-16 mm thick granite (of any type ) work (table rubbed and polished ) in window cills & cooking platform and like in cm (1:4) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shed of granite over 15 mm thick screed bed in CM 1:4 complete all as specifed. |
| 25 | M&L Brick work with old size burnt fly ash bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 all as specified and directed by Engineer - in - Charge . |
| 26 | M&L for Brickwork with old size flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:6 |
| 27 | M&L for hardcore of broken bricks of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface complete all as specified. |
| 28 | M&L for 75mm thick cement concrete 1:3:6 type C-2 (using 40 mm graged stone aggregate) as in sub base of flooring over rammed earth complete all as specified and directed by Engr-in-charge. |
| 29 | M&L 25mm thick cement concrete flooring 1:2:4 type B0 using 12.5mm graded aggregate as in flooring complete all as specified and directed by Engr-in-charge. |
| 30 | S&F non skid Ceramic tiles (light shade) 7-8mm thick (square/ rectangular) polished, area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement over 15mm thick rendering in cement mortar (1:4) and pointed in white or colour cement to match the colour of tiles complete all as specified. |
| 31 | M&L for glazed ceramic coloured tiles 7mm thick 300 x 450 mm size in(joint free) vertical surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade over and including 10mm thick cement sand plaster (1:3) complete all as specified and directed by Engineer - in - Charge. |
| 32 | OVERLAY- PU BASED ELASTOMERIC LIQUIED MEMBRANE SYSTEM FOR EXPOSED ROOF : Providing and applying polyurethane liquid roof waterproofing with improved water ponding capability, elastomeric high build liquid membrane for concrete roofs for exterior wall and exposed surface with solid content not less than 80% and solar reflective index not less than 106 as per (ASTM E1980-19)/tear strength ~20 N/mm (Free film, 14 days, +30 degree C) (ASTM D624) and tensile strength >= 2 N/mm2 (ASTM D4541), elongation 350 to 400% as per ASTM D412 and crack bridging ability upto 2mm.(a) After proper surface preparation, Apply one coat of Primer for PU coating as per manufacturers specification.(b) Apply 1st coat of ShaliUrethane® BTD (white) @ 650 gm / m²(minimum) or equivalent by brush / roller while prime surface is tacky, Spread waterproofing reinforced Glass Fiber mash of 45 GSM with overlaps of 50 mm in both directions when the surface is still tacky. Allow 1st coat to dry. (c ) Apply 2nd & 3rd coat of ShaliUrethane® BTD (white) @ 650 gm / m² (minimum) or equivalent by brush/roller. Make : Fosroc/Sika/Choksey/Bostik/STP/ Asian Paints/Berger PaintsNote : (i) The Minimum dry film thickness (DFT) of roof treatment shall be 1.5mm if any shortfall in thickness of above treatment the same shall be achieved by additional coat. (ii) The procurement of material and execution of the work of water proofing treatment shall be carried out by authorised applicator approved by GE.(iii) The manufacturer/authorised applicator shall give a warranty for the performance & durability for 10 years. |
| 33 | M&L rendering 5mm thick in ceiling on fair faces of brick work or concrete surfaces without using extra cement including water proofing material complete all as specified. |
| 34 | M&L rendering 15mm thick to internal surfaces of walls on fair faces of brick work or concrete surfaces in CM 1:6 finished even & smooth without using extra cement all as specified and directed by Engineer-in-Charge. |
| 35 | M&L rendering 15mm thick to external surfaces of walls on fair faces of brick work or concrete surfaces in CM 1:4 finished even & smooth without using extra cement admixed with WPC in cement mortar all as specified and directed by Engineer-in-Charge.. |
| 36 | Supply only liquid water proofing compound |
| 37 | M&L for providing 50 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection laid in alternate bays (n exc 2 Sqm each ) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified. |
| 38 | M&L for preparation of new surfaces of walls/ceiling incl pillar etc. and applying cement based putty of 1 mm thickness over plastered surface to prepare the surface even and smooth and applying two coat of distemper with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over a coat of alkali resistant primer complete, by mechanical means as per manufacturer's specification all as specified and as directed by GE. |
| 39 | M&L for preparation of new surfaces of wall/ceiling incl pillars etc. and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over wall surfaces by mechanical means as per manufacturer's specification all as specified and as directed by GE. |
| 40 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of but of Frame size 45x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall not be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.Note : 1: Test certificate of manufacturer to be provided by contractor . 2. Embossing with barcode of manufacturer engraved over each door frame and shutter is manadatory. |
| 41 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of but of Frame size 65x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall not be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.Note : 1: Test certificate of manufacturer to be provided by contractor . 2. Embossing with barcode of manufacturer engraved over each door frame and shutter is manadatory. |
| 42 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of 30 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws including supply and fixing following items : (a) Stainless Steel (304 Grade) Finished Square Tower Bolt 200mm long, dia 10mm - 2 nos per leaf(b) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos. perleaf(c) Stainless Steel (304 Grade) 100mm size and medium weight butt hinges - 3 nos per leaf complete all as specified and directed by Engineer-in-Charge. Note : 1: Test certificate of manufacturer to be provided by contractor . 2. Embossing with barcode of manufacturer engraved over each door frame and shutter is manadatory. |
| 43 | S&F Door closer aluminium (extruded section body) hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed complete |
| 44 | S&F Aluminium handle cast type anodized 125 mm long all as specified and directed by Engineer-in-Charge. |
| 45 | S&F Aluminium anodized barrel tower bolt of extended section and fixed 150 mm long all as specified and directed by Engineer-in-Charge. |
| 46 | S&F 100 mm long butt hinges extruded almiunium alloy with galvanised mild steel hinges pin, anodised and fixed all as specified and directed by Engineer-in-Charge. |
| 47 | S&F 200 mm long Aluminium anodized barrel tower bolt of extended section and fixed all as specified and directed by Engineer-in-Charge. |
| 48 | S&F 150 mm long Aluminium handle cast type anodized all as specified and directed by Engineer-in-Charge. |
| 49 | S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy all as directed. |
| 50 | S&F Aluminium door stopper of (150mm overall length of cover plate) all as specified and directed by Engineer-in-Charge. |
| 51 | M & L for Providing and fixing factory made uPVC white colour fixed window/ventilator made of extruded profiles with wall thickness of 2.3mm (±0.2mm). Window profile with hollow section with multi-chamber. Frame (60mm x 58mm), T-profile (one vertical length in between two shutters) (60mm x 74mm), glazing bead (35mm x 20mm) shall be miter cut and fusion welded at all corners, including drilling of holes for fixing hardware, water drainage arrangements, EPDM gasket, 1.2 ±0.2mm thick galvanized steel reinforcement in frame (28mm x 21.5mm) and T-profile (27mm x 17mm) inserted in required profiles. Frame shall be fixed to wall with 8mm x 100mm long fasteners, provided with 5mm thick toughened glass of selected quality area not exceeding 1.00 sqm.Note: The unit rate quoted by contractor includes the cost of 5mm thick toughened glass and all other connected accessories. Net opening will be measured for payment purpose. |
| 52 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specifed and directed. |
| 53 | S & F Brass CP mixer for Wall/ WHB, mixing hot & cold water screwed down for iron pipe and fixed |
| 54 | S & F 15 mm bore bib tap fancy type chromium plated with crutch or butterfly handle screwed down ,screwed for iron pipe all as specified. |
| 55 | S & F 15mm bore CP Angle cock chromium plated, high pressure, with crutch or butterfly handle, screwed both ends of iron pipe or for union and fixed all as specified . |
| 56 | S&F 15mm stop valves fancy type, chromium plated with long shank and cup (concealed type) ,cast copper alloy, screwed down, high pre-ssure, with crutch or but-terfly handle, screwed both ends for iron pipe or for unions and fixed. |
| 57 | S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified. |
| 58 | S&F gun metal globe or gate valve with iron wheel screwed both ends for iron pipe of 20 mm dia all as directed. |
| 59 | S&F PVC connection both side brass unions internal for size 15mm dia and 450mm long all as specified and directed by Engineer-in-Charge. |
| 60 | S&F PVC waste pipe 32mm dia & 90 cm long Low density polyethylene (LDPE) pipes of pressure rating6 kgf/sq. cm all as specified and directed by Engineer-in-Charge |
| 61 | S & F for brass chromium plated shower rose 125 x 125 mm size with swivel joint including fixing to 15 mm dia steel pipe or union. |
| 62 | S&F soap dish,chromium plated, 100X100X60mm, fixed to wall with plugs with chromium plated screws complete all as specified and directed. |
| 63 | S & F glass corner shelf assembly fancy type made 8 mm thick sheet glass of size 300x300mm fixed with 'F' or 'D' type brass CP brackets complete all as specified. |
| 64 | S&F Health faucet (ABS Body) mild steel chromium plated/ EWC Jet spray suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed. |
| 65 | S & F rotational moulded polythene three layered white coloured water storage tank (cylindrical vertical with closed top) hoisted and fixed in position and including ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball with minimum weight 210 gm screwed for 20mm bore iron pipe supplied and fixed all as specified in SSR part I of capacity 1000 Litres all as specified and directed. |
| 66 | S&F toilet paper holder with flat recessed type stainless steel Complete all as specified and directed. |
| 67 | S&F Viterous China squating pan \\"ORISSA\\" pattern size 580MMX440mm, white with integral foot rest including cast iron 'P' or 'S' trap and connection to trap including cement concrete, and to flushing pipe, anti-syphonage pipe, etc. including making good to floor, complete all as specified. |
| 68 | S&F Wall mounted Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) but including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe, sheet cover complete. |
| 69 | S & F vitreous china Half stall urinal back white, providing and fixing plugs,bedding urinal agianst wall in cement mortar 1:2,securing urinal to plugs with and including 60mm long brass screws,pointing around urinal back in cement ,fixing automatic flusing cistern with brackets,flush pipe ,grating,water spreader and union for discharge pipe complete all as specified and directed |
| 70 | S&F PVC concealed type flushing cistern set of capacity 10 ltr with half frame including all fixing accessories and knob fixed in wall and including flush pipe of PVC 32mm bore and connection to WC pan making good dismantled portion of wall complete all as specifed and directed. Make:Cera cat part No B1110112 or equivalent |
| 71 | S & F vitreous china white oval shaped wash basin of size 550 x 400 mm including brackets,waste fitting 32 mm brass chromium plated complete all as specified and as directed. |
| 72 | S&F 600mm x 450mm beveled edge mirror of selected quality glass on 6mm thick commercial plywood and fixed wooden plugs with chromium plated brass screw and cup washers. |
| 73 | Supply & fixing PVC (SWR) floor trap, plain with grating, suitable for 100/75mm bore pipe including jointing with solvent cement complete all as specified and as directed by Engineer-in- charge. |
| 74 | M & L for Supply of Tollet Water Supply Pipe 3/4\\" (20 mm)-2 nos. downtake pipes fixing done with Pipe Supporting Clamping System having Profile Bracket+ Slotted C Channel + U Bolt R/M System -1. Domestic Water Supply Down take lines 3/4\\" GI-2 nos. from Terrace to 1st & Ground Floor Vertical Fixed line with wall distance 4\\": Pipe Support Clamping made of: 1. Profile Bracket Wall Distance 4\\" made of Low Carbon Hot Roll gauge corrected Oil Pickeled & Drawn (HROP D) Steel (IS 1079); material size 32 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method-ASTM B-117-2019) result above 2000 hrs with SS304 Hex Flange Bolt with Serration 5/16 x 3/4 (A/F 13mm) as per DIN 6921 and SS304 Hex Flange Nut BSW 5/16 x 18 x 8 13 with Serration as per DIN 6923. 2. Slotted \\"C\\" Channel B3 Type to be used of size 10\\" (Continuous Slotted \\"C\\" Channel with ribs) made of Low Carbon Hot Roll gauge corrected Oil Pickeled & Drawn (HROP D) Steel (IS 1079) are Hot Dip Galvanzied + Zn Al Flake coated with material 48mm x 3mm. 3. U bolt R/M are made of low carbon mild steel with Rod diameter 7 mm approx, Zn Al Flake coated with noise absorbing transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923-Zn Al Flake coated. Hotdip Galvanizing as per IS 2629 (1985)-610 grams/m2 (>85 microns). Material Grade: IS 1079 used as per MTC confirms to EN 10204 3.1. Material Qty: 1. Profile Bracket Wall distance 4\\"-2 Nos. 2. Continuous Slotted C Channel of B3 Type Size 10\\" - 1 No.; 3. U Bolt R/M for 3/4\\" GI pipe Dia. - 2 nos. 4. Justi Khilla GI coated 2 1/2\\"-4 nos. Fixing details: Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in Chief Engineer Bathinda Zone Technical Drawing (TD) of Factory Made Pipe Supporting System : DRG NO.- BTD-916. |
| 75 | M & L for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth |
| 76 | S&F 3-layer PP-R Polypropylene random copolymer) concealed pipes 20mm (OD) SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. |
| 77 | S&F 3-layer PP-R Polypropylene random copolymer) concealed pipes 32mm (OD) SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. |
| 78 | Supply & fixing 110mm bore PVC (SWR) pipes single socketed (pressure rating not less than 6kg/sqcm) in any length with rubber ring joints for drain or rain water fixed along walls, complete all as specified and as directed by Engineer-in- charge. |
| 79 | S&F 110mm PVC (SWR) pipes single socketed(pressure rating not less than 6kg/sqcm) in any length with rubber ring joints laid in trenches or in floors, complete all as specified and directed. |
| 80 | M & L for Supply for Pipe Supporting Clamping for Single pipe of PVC dia 110 mm (4\\") down take pipe fixing done with Clamping System consists of Rain Water Bracket Set with Pipe Support Channel + U Bolt Rubber Sleeve mounted System running vertically with wall distance 75 mm (3\\"): Pipe Support Clamping made of : 1. Rain Water Bracket Set with pipe support channel for 110 mm pipe having Wall Distance 75 mm (3\\") made of Low Carbon Hot Roll Gauge Corrected Oil Pickled and Drawn (HROP D) Steel (IS 1079); material size 32 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result 2000 hrs. 2. U bolt Rubber Sleeve mounted are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing semi transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923 - Zn Al Flake coated.Hotdip Galvanizing: As per IS 2629 (1985) - 610 grams/m2 (> 85 microns). Material Grade : IS 1079 used as per MTC confirms to EN 10204 3.1. Material Qty. for one unit : 1. Rain Water Bracket Set with pipe support channel for 110 mm pipe; Wall distance 75 mm (3\\") - 1 Nos. ; 2. U bolt Rubber Sleeve mounted for 4\\" (110 mm) PVC Pipe Dia. - 1 No.; and 3. Fixing Nail Zn coated of thickness 6.5 mm and length 63 mm (2 1/2\\") - 2 nos. Fixing Details:Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in Chief Engineer Bathinda Zone Technical Drawing (TD) of Factory Made Pipe Supporting System : DRG NO.- BTD-916. |
| 81 | Supply & fixing 75mm bore PVC (SWR) pipes single socketed (pressure rating not less than 6kg/sqcm) in any length with rubber ring joints for drain or rain water fixed along walls, complete all as specified and as directed by Engineer-in- charge. |
| 82 | S&F 75mm PVC (SWR) pipes single socketed(pressure rating not less than 6kg/sqcm) in any length with rubber ring joints laid in trenches or in floors, complete all as specified and directed. |
| 83 | M & L for Supply for Pipe Supporting Clamping - Single Pipe of PVC dia 75 mm (3\\") down take pipe fixing done with Clamping System consists of Profile Bracket + Continuous Slotted C Channel + U Bolt Rubber Sleeve mounted System running vertically with wall distance 100 mm (4\\"): Pipe Support Clamping made of : 1. Profile Bracket having Wall Distance 100 mm (4\\") made of Low Carbon Hot Roll Gauge Corrected Oil Pickled and Drawn (HROP D) Steel (IS 1079); material size 32 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result 2000 hrs with SS304 Hex Flange Bolt with Serration 5/16 x 3/4 (A/F 13mm) as per DIN 6921and SS304 Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration as per DIN 6923. 2. Continuous Slotted \\"C\\" Channel with ribs to be used of size 250 mm (10\\") made of Low Carbon Hot Roll Gauge Corrected Oil Pickled and Drawn (HROP D) Steel (IS 1079) are Hot Dip Galvanzied + Zn Al Flake coated with material 48mm x 3mm. 3. U bolt Rubber Sleeve mounted are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing semi transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923 - Zn Al Flake coated. Hotdip Galvanizing: As per IS 2629 (1985) - 610 grams/m2 (> 85 microns). Material Grade : IS 1079 used as per MTC confirms to EN 10204 3.1. Material Qty. for one unit : 1. Profile Bracket Wall distance 100 mm (4\\") - 2 Nos. 2. Continuous Slotted C Channel of Size 250 mm (10\\") - 1 No.; 3. U Bolt Rubber Sleeve mounted for 75 mm (3\\") PVC Pipe Dia. - 1 No.; and 4. Fixing Nail Zn coated of thickness 6.5 mm and length 63 mm (2 1/2\\") - 4 nos. Fixing Details: Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in Chief Engineer Bathinda Zone Technical Drawing (TD) of Factory Made Pipe Supporting System : DRG NO.- BTD-916. |
| 84 | Supply & fixing PVC (SWR) bends (any radius) suitable for 110mm bore pipe complete all as specified and as directed by Engineer-in- charge. |
| 85 | Supply & fixing PVC (SWR) bends (any radius) suitable for 75mm bore pipe complete all as specified and as directed by Engineer-in- charge. |
| 86 | Supply and fixing PVC (SWR) reducer 110/75 complete all as specified and as directed by Engineer-in-charge. |
| 87 | Supply & fixing PVC (SWR) vent cowl suitable for 75mm bore PVC pipe complete all as specifiedand as directed by Engineer-in- charge. |
| 88 | Supply & fixing PVC (SWR) of size 110 mm sanitary connection socket to fit out let of WC complete all as specified and directed by Engineer-in-Charge. |
| 89 | Supply & fixing 110mm bore PVC (SWR) junction single (single T) equal or unequal fixed with solvent cement, with access door complete all as specified and as directed by Engineer-in- charge. |
| 90 | Supply & fixing 75mm bore PVC (SWR) junction single (single T) equal or unequal fixed with solvent cement, with access door complete all as specified and as directed by Engineer-in- charge. |
| 91 | S&F 110mm PVC(SWR) couplers complete all as specified and directed. |
| 92 | S&F 75mm PVC(SWR) couplers complete all as specified and directed. |
| 93 | Surface excavation not exceeding 30 cm deep and averaging 15cm deep and geeting out in soft/loose soil. |
| 94 | M&L for broken stone or boulders in hardcore of gauge exc 63 mm but n exc 100 mm complete all as specified. |
| 95 | M&L for 75 mm thick PCC 1:4:8 type D-2 as in sub-base, foundation, mass concrete etc complete all as specified and directed. |
| 96 | M&L for machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size conforming to IS 15658-2006 of 80mm thickness, M-40 grade complete all as specified and directed. |
| 97 | M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete. |
| 98 | M & L for Earth work in excavation in all kind of soil by mechanical means (Hydraulic excavator) in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 99 | M&L for cement concrete M-15 (1:2:4 type B2, using 40 mm graded aggregate) as in foundation |
| 100 | M&L for precast factory RCC drain of shape & size as directed by GE alongwith male and female ends for proper jointing made of RCC 1:2:4 type B1 using 20mm graded agg, 75mm thk and reinforced with 8mm TMT bars @ 100mm c/c bothways two number of socket for hoisting including necessary formwork etc including hoisting and placing at site, jointed in CM 1:4 to form uniform length and fair finish to drain upto 80cm girth (width measured @ avg of inner girth and outer girth). Note: -Reinforcement shall be measured and paid seperately. |
| 101 | M & L for Mild steel bars (TMT) 06 to 08mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as spd and directed |
| 102 | S&F for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 |
| 103 | Excavating over areas, n exc 1.5m deep and getting out in soft/loose soil. |
| 104 | All as per Srl item no. 103 but exc 1.50M depth |
| 105 | All as per Srl item no. 103 but exc 3.00M depth |
| 106 | M&L PCC (1:3:6) type C2 using 40 MM graded stone agg as mass concrete for foundation. |
| 107 | M&L bricks work with sub class ‘B’ brick, straight or curved on plan exc 6M mean radius built in CM (1:4). |
| 108 | M&L RCC type A-1 1:1.5:3 (20 mm graded aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, blaconies, canopies, deck slabs andd in shelves and the like |
| 109 | Supplying & fixing 600 mm x 600 mm size as instructed by Engineer, air tight cast iron man hole frame and cover with three coats of paint of approved brand. |
| 110 | S&F 100MM bore of pipe in MM sand cast iron soil waste and vent pipe in any length without ears with cement. Joints |
| 111 | S&F 100MM cast iron Branch pieces, single (equal or unqual), ordinary or inverted (spigot or socket type) or with parallel branches |
| 112 | M&L PCC 1:3:6 type C-2 (using 40 mm graded stone agg) bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore SGSW pipe. |
| 113 | M & L for Providing, laying, jointing and testing of Double Wall Corrugated Polyethylene (DWCPE) pipe of 150 mm nominal internal diameter (160 mm outer diameter), confirming to IS 16098 (Part 2): 2013, structured wall piping system for non-pressure underground sewerage and drainage. Item includes cost of pipe, necessary joining materials (couplers, tees, unions, sockets, elastomeric rubber rings), lowering into trenches, aligning, jointing, testing for water tightness/smoke test as per standard specifications and as directed by the Engineer-in-Charge. (Excluding the cost of earthwork, PCC bedding and haunching). |
| 114 | M&L cement concrete type B-1 1:2:4 (20 mm graded agg) as in benching, bed plates, coping and like including necessary form work complete all as specified. |
| 115 | M & L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds etc. |
| 116 | S&F of mild steel bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe -290 Gde E-16 |
| 117 | M&L brick work with sub class ‘B’ brick in one & half brick thick honeycomb walling built in CM (1:4). |
| 118 | M&L brick work with sub class ‘B’ brick in one brick thick honeycomb walling built in CM (1:4). |
| 119 | M&L Brick bats loose filling with 80 to 150 MM in soakage pits/soakage wells. |
| 120 | Excavation in post holes or similar holes each n exc 0.5 cum getting out in soft/loose soil, returning filling in and ramming earth of broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance n exc 50m and making good surface in any type of soil. |
| 121 | M&L PCC 1:3:6 type C2 (using 40mm graded crushed stone agg) as in foundation of posts and struts. |
| 122 | S & F of mild steel angle iron posts and struts (ISA 65 x 65 x 6 mm) in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc ; MS Round Bars, flat iron fillets (for securing wire mesh etc) including all necessary drilling, boldting or reveting, welding etc and smilar work concerming to Fe-290 Gde 165 complete all as specified and directed. |
| 123 | M&L for FI 40 x 6mm for fixing chain link fencing with posts a etc complete. |
| 124 | S&F 10mm dia 60mm long MS screw bolt machine made with hexagonal or square head at one end and screwed the other with washer complete. |
| 125 | M&L 4mm dia Plain mild steel wire,galvanised class 3, in fencing including straining and fixing to wood, concrete or steel posts and/or to straining bolts, including securing with and provision of galvanised iron tying wire, galvanised iron staples or steel pins, etc. as directed (each line of wire to be measured.) |
| 126 | S & F of galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolt, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc as directed (each line wire to be measured). |
| 127 | Supply only chain link MS galvanised fencing, galvanised mild steel of mesh 100 x 100 mm size, 10 gauge complete all as specifed and directed |
| 128 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts etc including provision of binding wire as specified and directed. |
| 129 | M&L for two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces over 10 cm width or girth including preparation of steel surfaces. |
| 130 | M&L for two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces n exc 10 cm width or girth when unconnected with other painting including preparation of steel surfaces. |
| 131 | M & L for Formwork for column/piller above GL with fair finished flat surfaces of concrete. |
| 132 | M & L Two coats of cement base paint over a coat of white cement wash incl preparation of surface. |
| 133 | M&L mild steel framed work as in gates of angle or other section with gusset plates, rails, braces, etc., complete as specified in drg. |
| 134 | M&L mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment |
| 135 | S&F 20 mm bore Galvanised iron tube medium grade with all fitting fixed concealed complete to walls and ceiling or laid in floors, brenches complete all as specified and as directed by Engineer-in-Charge.. |
| 136 | S&F 25 mm bore Galvanised iron tube medium grade with all fitting fixed concealed complete to walls and ceiling or laid in floors, brenches complete all as specified and as directed by Engineer-in-Charge.. |
| 137 | S & F stop valve size 20 mm cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both end for iron pipe or for unions and fixed complete all as specified and directed by Engineer-in-Charge. |
| 138 | S & F stop valve size 25 mm cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both end for iron pipe or for unions and fixed complete all as specified and directed by Engineer-in-Charge. |
| 139 | M & L for Selection and identification of water yielding source at site by Govt approved geologist/Agency as approved by GE for a minimum location of 02 Points in overall area of 01 sqm complete all as specified and directed Please Enable Macros to View BoQ information |
| 140 | M & L for Selection and identification of water yielding source at site by Govt approved geologist/Agency as approved by GE for a minimum location of 02 Points in overall area of 01 sqm complete all as specified and directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysNov 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender