Tender For Addition/Alteration To Officers Mess And Provn Of Tiling Near Bldg No. P-87 At Afs Yelahanka.
Tender Value
48.29 Lakhs
Estimated cost
Bid Submission
17 Nov 2026
18 days left
EMD
96582
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Urban → Karnataka
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition/Alteration To Officers Mess And Provn Of Tiling Near Bldg No. P-87 At Afs Yelahanka.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 2 | M&L Vitrified ceramic light shade tiles double charged of 10mm thick and area of each tiles exceeding 0.36 Sqm for flooring over 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 3 | M&L Vitrified ceramic light shade tiles double charged of 10mm thick and area of each tiles exceeding 0.36 Sqm as in skirting over 10 mm thick rendering in CM 1:4 dado/skirting complete all as specified and directed. |
| 4 | M&L Glazed coloured Ceramic tiles of size 450x300X7mm thick set and jointed in neat cement slurry incl matching PVC corner beading and pointed in white or colour cement to match as in skirting/dado over 10 mm thick rendering in CM 1:4 finished complete all as specified and directed |
| 5 | M&L for non-skid coloured ceramic tiles 7 to 8mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile incl screed bed 15 mm thick in CM (1:6) complete all as specified and directed. |
| 6 | Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc laid dry and pointed complete all as specified and directed. |
| 7 | M&L for Granite (of any type) tiles 18-20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types over 20mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 8 | Demolition of cement concrete in ground floor and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed. |
| 9 | M&L 75 mm thick cement concrete type B-2,1:2:4 (40 mm graded aggregate) for plinth protection completes all as directed and specified. |
| 10 | M&L for Forming 12 mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘Thickness of slab 100mm below complete all as specified and directed. |
| 11 | Taking down cement plaster from brick or stone including raking out joints, hacking for key, scrubbing down with water, etc. walls of any description complete all as specified and directed. |
| 12 | Demolition of brick work or stone masonry built in CM incl all quoins all as specified and directed. |
| 13 | M&L Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in mortar, 1:6 type C1 1:3:6 (20 mm grade aggregate) complete all as specified and directed. |
| 14 | M&L 10mm thick cement plaster in CM 1:6 on brick work or concrete surfaces rendering is to be even & smooth without using extra cement on internal walls complete all as specified and directed. |
| 15 | M&L 15mm thick cement plaster in CM 1:4 on brick work or concrete surfaces rendering is to be even & smooth without using extra cement on external wall complete all as specified and directed. |
| 16 | M&L 5mm thick cement plaster in CM 1:3 on brick work or concrete surfaces rendering is to be even & smooth without using extra cement on Ceiling surface complete all as specified and directed. |
| 17 | M&L for Keyed pointing in Cement mortar 1:4 to random or polygonal rubble complete all as specified and directed. |
| 18 | M&L preparation of new plastered or unplastered surfaces of walls including scrapping and applying two coats of oil bound distemper over layer of 3mm thick putty with smooth finish incl priming complete all as specified and directed. |
| 19 | M&L for complete removal of existing treatment by washing down and smoothing old surface of walls including scrapping and applying two coats of oil bound distemper with smooth roller finish over 3mm thick wall care putty on wall incl priming, complete all as specified and directed. |
| 20 | M&L two coats of OBD over layer of 3mm thick putty with smooth finish incl priming on new plastered ceiling surfaces incl preparation of surfaces complete all as specified and directed. |
| 21 | M& L for new wall surface applying two coats of exterior acrylic emulsion paint (Apex) over one coat of exterior wall primer using airless spray technology with max two working pressure of 3300 PSI and capable of operating single spray gun with max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying acrylic emulsion should be able to spray in hard to reach area and penetration of acrylic emulsion on the surface etc. by skilled labour as per manufacturer instructions complete all as specified and directed. |
| 22 | M&L Complete removal of existing treatment by scrapping with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 grit having dia of 7\\"/9\\" to make the surface free from dust ,loose paint etc by skilled labour and applying two coats of exterior acrylic emulsion paint (Apex) over one coat of exterior wall primer using airless spray technology with max two working pressure of 3300 PSI and capable of operating single spray gun with max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying acrylic emulsion should be able to spray in hard to reach area and penetration of acrylic emulsion on the surface etc. by skilled labour as per manufacturer instructions complete all as specified and directed. |
| 23 | M&L Preparing old painted steel surface and applying one coat of Synthetic enamel complete all as specified and directed. |
| 24 | M&L Preparing New painted wooden surface and applying two coats of Synthetic enamel Paint over pink priming complete all as specified and directed. |
| 25 | M&L preparation of old decorated ceiling surface and applying two coat of OBD over layer of 3mm thick putty with smooth finish complete all as specified and directed. |
| 26 | Taking up or down 15mm steel tubing and connections complete all as specified and directed. |
| 27 | All as per item No 26 here-in-before but 20mm bore complete all as specified and directed. |
| 28 | S&F 20 mm dia of CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on walls / ceiling or laying in floors complete all as specified and directed. |
| 29 | Taking up or down 25mm bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed. |
| 30 | S&F CPVC pipes 25 mm SDR 11 & Plain CPVC SDR 11 on walls, ceiling or laying in floor including fitting in floors complete all as specified and directed. |
| 31 | S&F in repair gun metal globe gate valve 20 mm bore complete all as specified and directed. |
| 32 | S&F in repair gun metal globe gate valve 25 mm bore complete all as specified and directed. |
| 33 | S & F in repairs Vitreous China wash down water closet pan One Piece EWC size 650 x 360 x 745 mm (pedestal Sigle pattern), with smooth action plastic seat cover, valveless symphonic action type flushing cistern with 300 mm dia trap fixing as per manufacturing instruction complete as specified and directed.Make: CAT No S1013142 S Trap 300 mm Make of \\"Cera\\" or its Equivalent and approved by GE. |
| 34 | S&F in repairs Ceramic plain full pedestal wall hung type wash basin white/colour size 630 x 450 x290 mm height 820 cm and incl CP waste coupling, branches all as specified and directed.Make: CAT No -S2090101 Make of \\"CERA\\" or its Equivalent approved by GE. |
| 35 | S&F 600 x 450mm bevelled edge mirror of selected quality glass, mounted in 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 36 | S&F in repair CP Brass centre hole basin Mixer for hot and cold water screwed down for iron pipe and fixed for 15 mm dia complete all as specified.Make: FLR-5169NB of make \\"JAQUAR\\" or its Equivalent and approved by GE. |
| 37 | S&F in repair CP Brass 3-in-1 wall Mixer with overhead and hand shower for hot and cold water screwed down for iron pipe and fixed for 15 mm dia complete all as specified.Make: FLR-CHR-5281N of make \\"JAQUAR\\" or its Equivalent approved by GE. |
| 38 | S&F in repairs 15 mm dia two-way bib taps (fancy type), cast copper alloy with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule complete with check nut 15mm bore complete all as specified and directed.Make:CON-CHR-083 FTK of make \\"JAQUAR\\" or its Equivalent approved by GE. |
| 39 | S&F in repairs 15mm dia angle valves, cast copper alloy, CP, screwed down, high pressure, with crutch, screwed both ends for iron pipe or for unions and fixed complete all as directed and specified.Make: ARI-CHR-39053 of make \\"JAQUAR\\" or its Equivalent approved by GE. |
| 40 | S&F in repair Kitchen sinks with drainage board made of stainless steel 1 mm thick with plugs, washers and wastes, including bedding in cement mortar to wall with all fixing arrangements of overall size 915x460mm and bowl size 410x330x160mm incl sink coupling all as specified and directed. |
| 41 | S&F in repair sink cock fancy type complete all as specified and (table mounted) with 215 mm swivel spout complete all as specified and directed.Make:FLR-CHR-5347N of make \\"JAQUAR\\" or its Equivalent approved by GE. |
| 42 | S&F PVC Cabinet mirror of size 600 x 450 x125 mm complete all as specified and directed. |
| 43 | S&F in repair Brass chromium plated shower rose 125mm with swivel joints including fixing to steel pipe or union of 15mm bore all as specified and directedMake:OHS-CHR-1719 of make \\"JAQUAR\\" or its Equivalent approved by GE. |
| 44 | S&F in repairs CP Shower arm 15 mm size, 195 mm long with bend of 45 degree with flange as specified and as directed.Make:SHA-CHR- 483 FTK of make \\"JAQUAR\\" or its Equivalent approved by GE. |
| 45 | S&F in repairs PVC connection 15mm size with PTMT Nut of length 600mm etc complete all as specified and directed. |
| 46 | S&F of 32/40mm waste pipe for wash hand basin and sink complete all as specified and directed |
| 47 | S&F in repair CP towel rail 600 mm long fixed with chromium plated brass screws and wooden /plastic cleats fixed in repairs complete all as directed and specified. Make: AKP-CHR- 35711PS of make \\"JAQUAR\\" or its equivalent approved by GE. |
| 48 | S&F CP Towel ring of fixed with and including Chromium plated brass screws and wooden/plastic cleats, complete all as specified and directed. Make:ACN-CHR- 1121BN of make \\"JAQUAR\\" or its equivalent approved by GE |
| 49 | S&F Stainless steel Soap dish fix to wall all as directed and specified. Make:ACN-CHR- 1131N of make \\"JAQUAR\\" or its equivalent approved by GE. |
| 50 | S&F Corner glass shelf large, 300x300mm with Assy of CP and fixed with Chromium plated brass screws and wooden/plastic cleats, complete as specified and directed. |
| 51 | S&F glass shelf of size 12 cm wide x 60cm long for wash hand basin of cera complete all as specified. |
| 52 | S&F in repair brass CP Health faucet with 1.20m long flexible pipe and wall hook complete all as specified and directed. Make: ALD-CHR- 587 of make \\"JAQUAR\\" or its equivalent approved by GE. |
| 53 | S&F Stainless steel Plate Rack 0.75 Mtr x 0.78 Mtr complete all as specified and directed. |
| 54 | Supply and Fixing Stainless steel Toilet paper holder, complete all as specified and directed.Make:Jaguar Model AKP 35753P or its equivalent approved by GE. |
| 55 | S&F in repair Brass chromium plated bottle traps 32 mm for wash basins and urinal with inlet and outlet screwed for pipe or connections including necessary packing, union and cap fixed complete all as directed and specified. |
| 56 | S&F PVC floor trap 75mm dia, including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed. |
| 57 | S&F 110 mm dia PVC(SWR) Pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors and walls incl Taking down old pipes complete all as specified and directed. |
| 58 | S&F PVC (SWR) bends 110 mm dia in any radius with access door etc complete all as specified and directed. |
| 59 | S&F PVC (SWR) pipes 75 mm single socketed with in any length with rubber ring joints, laid in trenches or in floors and walls incl taking down old pipes complete all as directed and specified. |
| 60 | S&F PVC (SWR) bends 75 mm dia in any radius with access door etc. complete all as specified and directed. |
| 61 | S&F PVC (SWR) 75mm dia junction (single 'T') equal or unequal with access door etc. complete all as specified and directed. |
| 62 | S&F CP grating size 100mm fixed with white cement complete all as specified and directed. |
| 63 | Taking down door Chowkats or frames not exceeding 1.50 sqm with shutters (without taking off shutters from the frame) of any description complete all as specified and directed. |
| 64 | All as per item No 63 above but exceeding 1.50 sqm but not exceeding 4.00 sqm complete all as specified and directed. |
| 65 | M & L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia complete all as specified and directed.(M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made) |
| 66 | Ditto above item no 65 but double extruded WPC of Frame size 50 x 125 mm complete all as specified and directed. |
| 67 | Cutting holes in brick walls built in CM for inserting hold fast and making good dismantled portion in CM 1:3 or PCC 1:2:4 (type B 0) using 12.5 mm graded aggregate ¸depth of embedded portion of hold fast not exceeding half brick complete all as specified and directed. |
| 68 | S&F powder coated anodised aluminium frame and shutters with all fixing arrangements for doors, windows and ventilators with one or more rebates including join cleat for fixing etc aluminium section of powder coating not less than 50 micron all as specified and directed. |
| 69 | S&F powder coated Anodised aluminium window and ventilator shutters, sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings and rollers complete all as specified. |
| 70 | S&F powder coated Anodised aluminium Door shutters, aluminium section weight 0.55kg/mtr including necessary joining cleats, glazing clips rubber neoprene packing, handle 2 nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified and directed |
| 71 | S&F Door closer hydraulically regulated, aluminium body, designation No. 3 universal type, suitable for door shutters unto 851 to 1000 mm in width and of weight between 60 to 80 kg, ISI marked, complete all as specified and directed. |
| 72 | S&F Mortice lock, aluminium body, 4 lever, 150 mm size, vertical type with two keys complete all as specified and directed. |
| 73 | S&F sheet glass ordinary quality 4.00 mm thick as in window, showcase aluminium frame work & similar work with or without glass roller area exc 0.50 Sqm including neo prime gasket complete all as specified and directed. |
| 74 | S&F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed |
| 75 | M&L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet reinforced with M.S. Square tube, suppling & fixing edges will be painted to match with prelam sheet complete all as specified and directed. |
| 76 | S&F Factory Made Solid PVC Moulded Door Shutter, with particle board core 28 to 30 mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face including necessary fittings etc complete as specified and directed. |
| 77 | M&L Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed.(Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 78 | S&F 35mm thick 2nd class Hard wood Glazed and Skelton shutters, open rebated and prepared to receive glass, gauze etc divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers. Edges of framing plain, chamfered or rounded, fitted with cut and metered beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 and fitted to Chowkhat complete all as specified and directed. |
| 79 | S&F Butt hinges of size 100mm extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed. |
| 80 | S&F Brass, sliding door bolt 250 mm long with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed. |
| 81 | S&F for brass, barrel tower bolt 150mm with cast or sheet barrel and of extruded section rolled or cast bolts and fixed complete all as specified and directed. |
| 82 | S&F for extruded brass handle 150mm fabricated type polished complete all as specified and directed. |
| 83 | S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor 150 mm size of cover plate complete all as specified and directed. |
| 84 | S&F Brass 300 mm ordinary rat rail rod pattern springs incl roller and roller plate complete all as specified and directed. |
| 85 | S&F sheet glass ordinary quality 4mm thick and glazing with oil putty in square n.exc 0.50 Sqm in each pane fixed with aluminium window and ventilator complete all as specified and directed |
| 86 | All as item 85 above but figured glass pin head type complete all as directed and specified. |
| 87 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width or aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 88 | S&F for aluminium powder coated drapery rod 32mm dia fixed with suitable bracket complete all as specified and directed.(Note: Bracket will be measured and paid separately) |
| 89 | S&F aluminium powder coated fancy type suitable brackets fixed at both ends of openings fixed over 1st class hard wood rounded wooden blocks 0f 65mm dia and 20mm thick fixed to stone wall/Brick wall using screws incl necessary drilling & finished with polishing Each opening shall have two fillets at both ends complete all as directed and specified. |
| 90 | M&L for factory made WPC single extruded board of 18 mm thick pre laminated shutter for kitchen cabinet, cupboard and tne prelaminated side with different design and other side plain white of density not less than 600kg/cum the 18mm board should be 100% lead free, water proof, termite proof and moisture/weather proof and good screw holding capacity including all fittings complete all as specified. |
| 91 | S&F Stainless steel 304 grade kitchen basket 48 cm x 50 cm x 10 cm complete all as specified and directed. |
| 92 | S&F Stainless steel 304 grade kitchen basket 48 cm x 50 cm x 15 cm complete all as specified and directed. |
| 93 | S&F Stainless steel 304 grade kitchen basket 48 cm x 50 cm x 20cm complete all as specified and directed. |
| 94 | Dismantling of old Ceiling boards (Fibre, pulp, insulation, etc) or insulation boards /slabs blankets, including cover fillets and frame work complete all as specified and directed. |
| 95 | S&F of Armstrong Board 9mm thick in ceiling fixed with screws all complete as per manufacturer’s instruction complete all as specified and directed. |
| 96 | S&F Anodized aluminium snap grid of size 605mmx605mm (Powder coated) frame work for false ceiling, including 4mm dia GI wire for hanging complete all as specified and directed. |
| 97 | Surface excavation in hard/dense soil not exceeding 30 cm deep and averaging 20cm deep and getting out complete all as specified and directed. |
| 98 | Removing of excavated soil to a distance n.exc 50m and depositing where directed by the Engr-in-Charge at a level n.exc 1.50m above the starting point complete all as specified and directed. |
| 99 | M&L for hard core of gauge 63mm deposited, spread and levelled to a true surface Complete all as specified and directed. |
| 100 | M&L for 100mm thick cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in hard standing complete all as specified and directed. |
| 101 | M&L Non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc, laid in 1.50mm spacer and grouted with epoxy joint filling material set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile incl screed bed 15 mm thick in CM (1:6) complete all as directed and specified. |
| 102 | M&L for chequered tiles of size 300x300x 25 mm thick, set and jointed in neat cement slurry in floors and pointed in white or coloured cement to match over 15 mm thick screed bed in cm 1:6 complete all as specified and directed. |
| 103 | Taking down existing unserviceable point wiring of any type/ size of light/fan/socket/two way/bell etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and removal of unserviceable material out of site area complete all as specified & directed. |
| 104 | Taking down existing unserviceable light fittings, security light fittings, bulk head fittings, fall ceiling light fittings etc. from any height of building complete all as specified & directed. |
| 105 | Taking down existing unserviceable Distribution boards any capacity complete all as specified & directed. |
| 106 | Taking down existing unserviceable MCB's/MCCB's any capacity complete all as specified & directed. |
| 107 | Taking down existing unserviceable submain wiring complete all as specified and directed. |
| 108 | Dismantling and taking down of old unserviceable LT cable of any size/core from trench complete all as specified and directed. |
| 109 | M&L for point wiring in PVC casing & capping all as required at site of size confirming to IS 2079-1973 medium grade on surface with PVC insulated sheathed multistranded copper conductor cable (FRLS) 1.5 Sqmm nominal cross sectional area 1100 volts grade with all fittings such as elbows, bends, junction boxes, saddles including PVC board (ISI Marked) and screws and Rawal plug including 1.5 Sqmm PVC insulated & unsheathed copper conductor cable as earth wire and connected to light/fan & common earth dolly with necessary copper thimbles complete all as specified and directed or One light/bell / Fan point controlled by one ,one way switch |
| 110 | All as per item No 109 above but one socket outlet 5 pin 5/6 Amps on independent board controlled by one, one-way switch complete all as specified and directed. |
| 111 | All as per item No.109 above but one socket outlet 5 pin 5/6 Amps on same board with other one, one-way switch complete all as specified and directed |
| 112 | All as per item No .109 above but for socket out let, 15/16 Amps on independent board with 4 Sqmm size cable and 2.5 Sqmm for continuity earth wire connected to common earth dolly complete all as specified and directed |
| 113 | All as per item No .109 above, but for One Bell point controlled by one, one way switch 5 amps, SP complete all as specified and directed |
| 114 | M&L for Point wiring one light/bell point controlled by one, one way switch complete with 1.5 Sqmm single core PVC insulted FRLS cable 1100 volts grade multistranded copper conductor drawn through in and including 20mm dia PVC rigid non-metallic conduit with all accessories such as internal bend, end caps etc complete concealed in walls and surface in ceiling/roof/etc including 1.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor cable as earth continuity conductor including fabricated branded modular metal flush box concealed in walls with suitable modular plate with cover with suitable screws for housing switches, socket outlets, fan regulators etc complete all as specified and directed. |
| 115 | All as per item No 114 herein before but one ceiling/exhaust fan point controlled by one, one way switch complete all as specified and directed. |
| 116 | All as per item No 114 herein before but one 05 Amps socket outlet point on same board complete all as specified and directed. |
| 117 | All as per item No 114 herein before but one switch socket outlet points 5 Amps on independent board complete all as specified and directed |
| 118 | All as per item No. 114 here-in-before but with copper conductor cable FRLS, 4.0 Sqmm for one 3 pin socket outlet, 15 Amps and including 4.0 Sqmm PVC insulated copper conductor cable as earth continuity conductor on independent board complete all as specified and directed. |
| 119 | S&F in repair switch piano single pole flush type 6 amps, 230 volts complete all as specified and directed. |
| 120 | S&F in repair Socket flush type multipurpose 2 in 1, 3 Pin, 6 amps, 230 volts complete all as specified and directed. |
| 121 | S&F in repair Switch socket combination flush type multipurpose 2/3 pin 6 amps 2 in 1 230 Volts complete all as specified and directed. |
| 122 | S&F in repair Switch socket combination 5 in 1 multipurpose 3/5 pin 16 amps flush type with complete all as specified and directed. |
| 123 | S&F in repair bell push 5 A flush type complete all as specified and directed. |
| 124 | S&F in repair Switch Modular 6A single pole, one way, 1 module complete all as specified and as directed. |
| 125 | S&F in repair Switch Modular 16A single pole, one way, 1 module complete all as specified and directed. |
| 126 | S&F in repair Socket, 6A - 2/3 pin combined 2 modules complete all as specified and directed. |
| 127 | S&F in repair socket Modular 6/16A 2/3 pin combined 2 modules complete all as specified and directed. |
| 128 | S&F in repair Modular ceiling fan regulator stepped socket size, 2 modules suitable to work on 230 volts complete all as specified and directed |
| 129 | S&F in repair calling bell ding dong working on 230 volts AC with different ring tones optional complete all as specified and directed. |
| 130 | S&F in repair ceiling rose three terminal surface bakelite type AC 50 Hz 230 volts of size 65 x 50 mm complete all as specified and directed. |
| 131 | S&F inverter LED 4 ft batten 20 Watt, 6500K with square profile and polycarbonate channel, lithium-ION battery with charging time 8 Hours -10 Hours and backup time unto 4-hour r and connector block complete all as specified and directed. |
| 132 | S&F LED batten light fitting 9 Watts 2 feet surface / wall mounted aluminium extrusion input voltage range 250 V, input frequency 50Hz, efficacy not less than 100 Lumen/Watt rated life 25000 burning hours including 2 nos PVC Connector blocks electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed. |
| 133 | S&F LED light fitting mirror type with high output diffuser 2 feet, 10-watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed. |
| 134 | S&F LED luminaire warm white 600 mm x 600 mm, 36watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. |
| 135 | S&F surface type downlight circular/square 12 W, efficacy not less than 100 lm/w, rated life 25000 burning hours including LED light driver holder connecting up with three core flexible copper conductor cable appropriate size from ceiling rose to the fixture complete all as specified and directed. |
| 136 | S&F LED picture light of 10 W for ambient lighting made from engineering grade polymer with prismatic diffuser, aesthetic design with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. |
| 137 | S&F LED wall light of 9 W for ambient lighting made from engineering grade polymer with prismatic diffuser, aesthetic design with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. |
| 138 | S&F slim recess type downlight circular/square 12 W, efficacy not less than 100 lm/w, rated life 25000 burning hours including LED light driver holder connecting up with three core flexible copper conductor cable appropriate size from ceiling rose to the fixture complete all as specified and as directed. |
| 139 | S&F LED security light fitting 45-Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant, efficacy not less than 120 lm/Watts, rated life 50000 burning hours complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed. |
| 140 | S&F LED Bollard Light with unique concept LED in IP 66 with sustainable performance in all section of Capacity 10W, 220V, 50 Hz CCT- 3000K, 800mm complete all as specified and directed |
| 141 | S&F decorative Post top gate light for 360-degree indirect light with IP 65 Protection, resistant to impact and corrosion, power coated aluminium die cast and spun aluminium body with clear /opal diffuser glare free and better uniformity, 40 Watt, 220 Volts, 50 Hz,5700K complete all as specified and directed |
| 142 | S&F MCB SP 6 to 32 Amps 240 volts C type with rupturing capacity 10 KA complete all as specified and directed. |
| 143 | S&F MCB SPN 40 to 63 Amps 240 volts C type with rupturing capacity 10 KA complete all as specified and directed. |
| 144 | S & F MCB TPN, 100 Amps, rupturing capacity 10 KA 415 volts suitable for fixing in existing DB of any capacity complete all as specified and directed. |
| 145 | S & F in repair sheet metal enclosure MCB DB SPN 4-way double door with 100 amps rated aluminium bus bar 240 volts double door with locking system complete all as specified and directed. |
| 146 | S & F TPN DB 4-way double door made out of CRCA sheet housing duly powder coated & confirming to IS specification complete all as specified and directed. |
| 147 | S & F Single pole and Neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps (AC Box) complete all as specified and directed. Please Enable Macros to View BoQ information |
| 148 | S & F Single pole and Neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps (AC Box) complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysNov 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 25 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender