Tender For Macadamisation From Masjid Sufi Din Pora Towards Rajouri Kadal And Frok Cycle Bahar To Tip Top Towards Rajouri Kadal. (Adv. Cost Rs.18.00 Lacs)
Tender Value
18 Lakhs
Estimated cost
Bid Submission
03 Nov 2026
2 days left
EMD
36000
Bank guarantee accepted
Document Fee
800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Macadamisation From Masjid Sufi Din Pora Towards Rajouri Kadal And Frok Cycle Bahar To Tip Top Towards Rajouri Kadal. (Adv. Cost Rs.18.00 Lacs)
BOQ
| Sl. No. | Item Description |
| 1 | Taking out of GEOTAGGED photographs of size 150mm x 100mm at site before execution of work, during execution and after completion of work including submitting the same to the engineer incharge. |
| 2 | Surface dressing of ground including removing vegetation and inequalities, not exceeding 15cm deep and disposal of the rubbish beyond SMC limits in all kinds of soils including all its leads, lifts, loading, unloading, head load (if any) costs & carriages etc., complete. |
| 3 | Scarifying the existing bituminous road surface to a depth of 50mm and disposal of scarified material within all lifts and lead upto 1KM by mechanical means. |
| 4 | Providing, Laying, Spreading & Compacting graded stone aggregate (size range 53mm to 0.075mm) to wet mix macadam (WMM) specifications including mixing the material with water at OMC mechanical mixer plant carriage of mixed material by Tipper at site with all leads and lifts laying in uniform layers in sub base/ base course on a well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density complete as per technical specification of clause 406.(75mm thick compacted). |
| 5 | Providing and applying tack coat using hot straight run bitumen of VG 10 grade including heating the bitumen and spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface to remove all dirt, dust, mud etc and finally brooming the surface as per required specification. (Including cost & carriage of all materials involved upto site of work complete). |
| 6 | On WBM surface using tar @0.75kg/sqm. |
| 7 | On BT surface using tar @0.5 kg/sqm. |
| 8 | Providing/ laying 50mm thick compacted bituminousmacadam base course with stone aggregate of quality, size and grading as per specified in most specification and straight run bitumen of VG 10 @ 3.3% by weight of total mix including hot mixing of stone aggrt. and bitumen in hot mix plant transporting and laying mixed material with paver finisher to the required level and grade. rolling with road roller of 8 to 10 ton capacity to achieve the required compaction and density (including cost & carriage of all materials involved upto site of work complete). |
| 9 | Providing/ laying 25mm thick semidense Bituminous concrete using material agg. satisfying the gradation set out in most specification with 5% binder content (by way of total mix) bitumen VG 10 @2.88 kgs/ sqm with the aid of hot mix plant and paver finisher including rolling with 8 to 10 ton capacity road roller to achieve the required compaction and density with 8/100 including rolling and finishing complete including cost and carriage of material involved. |
| 10 | Providing/ laying 6mm thick seal coat premix fine agg. (Passing 2.36mm and retained on 180 micronsieve) with bitumen 128 kg of grade 80/100 bitumen per cum of fine agg. (0.768kg of bitumen per sqm) and 0.60 cum of fine agg. per 100 sqm of road surface including rolling and finishing complete as per most specification (including cost and carriage of all materials involved upto the site of work) |
| 11 | Raising of manhole cover and frame slab by way of cement concrete to required level (including dismantling existing slab and making good the same as required) complete. |
| 12 | Steel work in built up tabular (round, square or rectangular hollow tubes etc.) trusses etc. including, cutting, hoisting, fixing in position and applying readymix primer two or more coats of approved steel primer, including welding and bolted with special shaped washers complete in all respects with all leads, lifts, loading, unloading, head load (if any) costs and carriages complete. |
| 13 | P/ L of Cement concrete 1:2:4 ( 1 cement :2 coarse sand : 4 graded stone aggregate 40 mm nominal size) in pavements, laid to required slope and camber in panels as required including consolidation, finishing and tamping all inclusive leads, lifts, loading, un-loading, head load (if any) cost and carriage of material involved complete. |
| 14 | Providing and applying 2.5mm thick road marking strips (retro-reflective) of specified shade/ colour using hot thermoplastic material by fully/ semiautomatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications complete. |
| 15 | Providing and fixing of plastic road hump safety speed breakers in black and yellow colours for high visiblity including fixing with required fasteners, adhesive and cement concrete (if required) as directed by Engineer Incharge complete. |
| 16 | Providing and fixing of Sign board of Granite Marble Stone for foundation/ inauguration stone of size “3x3” feet including engraving the text on the stone including fixing in MS angle stand in proper position and height and make the base for stand by way of cement concrete as per DOIC complete. |
| 17 | Providing and laying of MS Pipe of 300mm dia. As X-Drainage in position to the required slopes and grades including earth work in excavation and refilling the same with proper cushioning including carriages of pipes upto site of work complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysNov 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender