Housing Urban and Rular Development Local Bodies Closing in 6 days TDR #58235923

Tender For Construction Of One Room Of Primary Health Care At Panchayat Nathal,Block Kharah Balli Under The Scheme Capex Budget Ddc Plan For The Year 2026-27

Issued by Local Bodies · Jammu, Jammu and Kashmir
Tender Value
9.80 Lakhs
Estimated cost
Bid Submission
09 Nov 2026
6 days left
EMD
19600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Construction Of One Room Of Primary Health Care At Panchayat Nathal,Block Kharah Balli Under The Scheme Capex Budget Ddc Plan For The Year 2026-27

BOQ

Name of Work:- Construction of One room of Primary Health Care at Panchayat Nathal,Block Kharah Balli under the scheme CAPEX Budget DDC Plan for the year 2026-27
Sl. No. Item Description
1Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil
2Providing and laying in position cement concrete of 1:5:10 grade(1 cement: 5coarse sand : 10 graded crushed stone aggregate 40mm nominal size) excluding the cost of centring and shuttering- All work upto plinth level
3Providing and laying in position cement concrete of 1:3:6 grade(1 cement: 3 coarse sand :6 graded crushed stone aggregate 20mm nominal size) with excluding the cost of centring and shuttering- All work upto plinth level
4Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
5Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. ) 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size
6Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
7Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete
8Cetering and shuttering including strutting propping etc and removal of form for foundation footings, bases of columns etc for mass concret.
9Cetering and shuttering including strutting propping etc and removal of form for Lintel Beam, beams, Plinth Beam, girders, bressumers and cantilevers.
10Cetering and shuttering including strutting propping etc and removal of form for Column, Pillars, Piers, Abutment, Posts and Struts
11Cetering and shuttering including strutting propping etc and removal of form for suspended floors, roofs, landing, balconies and access platform
12Edges of slabs and breaks in floors and walls under 20 cm wide
13Brick work with common burnt clay F.P.S. (non-modualar) bricks of class designation 75 in foundation and plinth in Cement mortar 1 :6 ( 1 cement : 6 coarse sand)
14Extra for brick work in superstructure above plinth level upto floor V level
15Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mmangle iron and 3mm M.S. gusset plates at the junctions and corners, allnecessary fittings complete, including applying a priming coat of approvedsteel primer.Using flats 30x6mm for diagonal braces and central cross piece.
16Filling availavel excaveted earth ( excluding rock ) in tranches, plinth, side of foundation
1715 mm Cement plaster of mix 1 : 6 ( 1 cement : 6 fine sand)
1812 mm Cement plaster of mix 1 : 6 ( 1 cement : 6 fine sand)
196mm cement plaster to ceiling of mix 1 : 3 (1 cement:3 fine sand)
20Providing and laying vitrified floor tiles in different sizes (thickness tobe specified by the manufacturer) with water absorption less than 0.08%and conforming to IS:15622 of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand)including grouting the joints with white cement and matching pigmentsetc. completeSize of tile 600x600 mm
21Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
22Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more cotes) over and including priming coat with cement primer
23Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)
24Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work Two or more coats on new work
25Making plinth protection 50 mm thick of cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded crushed stone aggreagate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.
26Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall: 15 mm dia. nominal bore
27Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall: 20 mm dia. nominal bore
28Providing and fixing PTMT Bib cock of approved quality and colour 15 mm nominal bore, 90 mm long, weighing not less than 88 gms (Long body)
29Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid , 10 liter low level white vitreous china flushing cistern and CP flush bend with fittings and C.I. brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete,including painting of fittings and brackets, cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid.
30Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : White Vitreous China Wash basin size 550x400 mm with a pairof 15 mm C.P. brass pillar taps.
31Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265mm sizesrespectively.
32Providing and placing on terrace (at all floor levels) polyethylene waterstorage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
33Providing and fixing PVC pipe 75mm dia superior quality
34Providing and fixing PVC pipe 110mm dia superior quality
35Providing and fixing 110mm PVC bend
36Providing and fixing Bend 75mm
37Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
38Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 Amp modular socket outlet and 25 Amp modular with MCB, \\"C\\" curve including connections, painting etc. as required.
395/6 Amp Switch
403 pin 5/6 Amp socket outlet
4115/16 A switch
426 pin 15/16 A socket outlet
43Providing and fixing circular/hexagonal cast iron box for ceiling fan clamp, of internal dia 140 mm, 73mm height, top lid of 1.5mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/M.S. sheet box by means of 3.3mm dia. round headed screws, one lock at the corners. Clamps shall be made of 12mm dia M.S. bar bent to shape as per standard drawing.
44Supplying and fixing of ceiling fan 1200 mm sweep Usha, Havells, Orient, Bajaj & Crompton (Make payment on GST Bill only)
45Steel work welded in built up sections/framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In stringers, treads, landings etc. of stair cases, including use ofchequered plate wherever required, all complete.
46Carriage of Sand with in average Lead 2 KM by M.T
47Carriage of Sand & aggrigate with in average Lead 22 KM by M.T
48Carriage of Bricks with in average Lead 22 KM by M.T
49Add Provission for Citizen information Board including painting Writing etc. Compmlet Job (GRANITE PLATE) Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58235923
AUTHORITY Local Bodies
TENDER VALUE 9.80 Lakhs
LAST DATE 09-11-2026
Authority
Authority Name Rural Development And Panchayats Department
Work Description Tender for Construction Of One Room Of Primary Health Care At Panchayat Nathal,Block Kharah Balli Under The Scheme Capex Budget Ddc Plan For The Year 2026-27
Basic Detail
Tender No e-NIT No. 743 REWJ of 2026-27 dated 24-10-2026
Bidding Type Tender
Location
City Jammu
State Jammu and Kashmir
Key Dates
Publish Date 27 Oct 2026
Submission Date 09 Nov 2026
Open Date 10 Nov 2026
Finance
Tender Value 9.80 Lakhs
Tender Fee 500
EMD 19600
Exemption Not Available
Document List
687588cf-327a-4d51-b3d2-d7e8c2030688.html
BOQ_1116211.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Oct 27, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 09, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 6 days
Nov 10, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 7 days

Tender Documents

Download All (ZIP) ↓
html

687588cf-327a-4d51-b3d2-d7e8c2030688.html

xls

BOQ_1116211.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender