Housing Urban and Rular Development Local Bodies Closing in 2 days TDR #58235747

Tender For Tirupathur District Mlacds 2026-2027 Construction Of New Anganwadi Building At Killanur In Pung Attunadu Panchayat Tirupattur Block Package No.01

Issued by Local Bodies · Tirupathur, Tamil Nadu
Tender Value
Ref. Documents
Estimated cost
Bid Submission
19 Nov 2026
2 days left
EMD
44000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Tirupathur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Tirupathur District Mlacds 2026-2027 Construction Of New Anganwadi Building At Killanur In Pung Attunadu Panchayat Tirupattur Block Package No.01

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 11-Nov-2026 Tirupathur District MLACDS 2026-2027 Construction of New Anganwadi Building at killanur in Pungampattunadu Panchayat Tirupattur Block Package No.01 Date 19-Nov-2026

BOQ

Name of Work:- Tirupathur District MLACDS 2026-2027 Construction of New Anganwadi Building at killanur in Pung attunadu Panchayat Tirupattur Block Package No.01
Sl. No. Item Description
1Construction of New Anganwadi Building @ Killanur H/O Pungampattu nadu .
2Earthwork excavation for foundation (for narrow excavation) to full depth as per designed in all soils and sub soils except soft disintegrated rock not requiring blasting and hard rock requiring blasting and bailing water wherever necessary.
3Supplying and filling in foundations and basement with filling M sand in layers not exceeding 15 cm. thick, well watered ,rammed and consolidated etc. complete complying with standard specifications.
4Refilling the approved good quality earth in plinths, area development etc. wherever specified in layers is not exceeding 200 mm thick, with available earth at site.
5Plain Cement Concrete 1 : 4 :8 ( one part of cement, four parts of sand and eight parts of hard broken stone ) using 40 mm gauge hand broken hard broken granite stone jelly complying with standard specifications in foundations and basement.
6Brick work in following Cement Mortar 1:5 using best quality Country bricks of size 8\\"3/4 x 41/4\\" X2 3/4\\" for foundation and basement including curing etc., complete complying with standard specification. Including scaffolding curing cost of reinforcement etc. all complete as per specifications and drawings as directed by the Engineer in-charge.
7Below GL
8Above GL
9Steel - Fe 500D : Supply, fabrication and placing of reinforcement steel of high yield strength ribbed bars of various diameters and grade conforming to IS 1786 for reinforced concrete work. The work includes recoiling, straightening, cutting, bending, fabricating, and placing in position, at all levels including lead and lift, according to drawings, specifications etc. complete and supply & use of 18G black annealed binding wire double fold to tie the bars in position and providing precast cement/ PVC cover blocks for main reinforcement to ensure specified cover and complete., including all labor charges etc as directed by departmental officers.
10Supplying and erecting Centering and Shuttering for soffits including necessary supports and strutting up to 3 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at about 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specification.(Payment for centering shall be given after the concrete is laid).
11Upto Basement
12Ground Floor
13Above GL
14R.C.C. 1:1.5:3-using 20mm ISS HBGS metal including cost and conveyance of materials and labour charges etc. complete
15Below GL
16Above GL
17Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no crushed stone M.Sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.
18Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stone M.Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers
19Paving the floor with best quality Vertified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three crushed stone M.Sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification.
20Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three crushed stone M.Sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers.
21Dadooing of walls with colour glazed tiles of size 300x200x6 mm of best quality including cost and conveyance of all materials to site and all labour charges etc complete.
22Providing granolithic floor finish of the following thickness with plain cement concrete 1:2:4 (One Cement, Two crushed stone M.Sand and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers)
23Ceiling Plastering with cement mortar 1:3 mix to 10 mm thick for R.C.C. Items including cost and conveyance of all materials to site and all labour charges etc complete
24Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete). The Putty should be got approved by the Executive Engineer before use on work.
25Plastering with cement mortar 1;5 -12mm Thick including the cost and conveyance of all materials and cost of all labour charges etc., complete.
26Distembering two coats with best approved distember including cost and conveyance of all materials to site and all labour charges etc complete
27Painting two coats using ready mixed Plastic Emulsion paint inlcuding priming coat and cost and conveyance of paint and all labour charges etc complete
28Towards the supply of steel Doors and Windows
29Window-
30Ventilater- 0.90 X 0.45m
31RCC jolly
32Painting two coats over new iron work using synthetic enamal paint including cost and conveyance of all materials to site etc complete
33supplying and fixing of cuddapah slab 50mm thick including all charges etc., all complete
34110mm Pvc pipe for RWHS
35Supplying & Fixing in position of Indian type Water closet 580x440mm including cost and conveyance of all materials to site and all labour charges etc complete.
36Wash basin
37cuddapah sink
38Provision for electrification items including all cost and conveyance etc., all complete
39Light point SD no 18
40Plug point SD 36
41DPIC switch 500V SD 142
42Service connection SD no 65
43Service pipe SD no 70
44Tube light fiitings SD 88
45ceiling fan
46BHF with CFL SD no 83
47Exhaust fan 300mm dia
48Provision for Water supply arrangements
4932mm PVC Pipe
5032mm PVC Bend
5125mm PVC Pipe
5225mm PVC Elbow
5325mm PVC Tee
541000 lit sintex tank
55Rcc ring
56Provision for Stainless steel handle for Disabled persion
57Provision of BALA Painting for Cartoons , Lettering , Picthurs Charges
58Provision for Name board charges
59GST Amount for providing service to Government contract works for the above construction works. { GST amount is the Total GST amount for total overall quoted amount above this row in column \\"BB\\" for all works in this package} Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58235747
AUTHORITY Local Bodies
TENDER VALUE Ref. Documents
LAST DATE 19-11-2026
Authority
Authority Name Rural Development And Panchayats Department
Work Description Tender for Tirupathur District Mlacds 2026-2027 Construction Of New Anganwadi Building At Killanur In Pung Attunadu Panchayat Tirupattur Block Package No.01
Basic Detail
Tender No A2/3075/2026
Bidding Type Tender
Location
City Tirupathur
State Tamil Nadu
Key Dates
Publish Date 11 Nov 2026
Submission Date 19 Nov 2026
Open Date 20 Nov 2026
Finance
Tender Value Ref. Documents
Tender Fee Ref. Documents
EMD 44000
Exemption Not Available
Document List
BOQ_863069.xls
fee0dc94-8557-4a3b-a6fd-14c24a14ba39.html
Tendernotice_1.pdf
Tendernotice_2.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 11, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 19, 2026
18:00 IST

Corrigendum-1 Issued

Clarifications on tender conditions and amendments issued.

Upcoming · 2 days
Nov 19, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 2 days
Nov 20, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 3 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_863069.xls

html

fee0dc94-8557-4a3b-a6fd-14c24a14ba39.html

pdf

Tendernotice_1.pdf

pdf

Tendernotice_2.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender