Tender For Mtps-Ii -Es Circle - Tgm&Ca Division - Inspection Of Condenser Tubes Both Hp /Lp Sides, Inspection, Cleaning And Painting Of Corroded Inner Surface Of Condenser Water Box 8 Nos Both Hp & Lp Sides, Inspection And Cleaning Of Hot Wells, Over
Tender Value
Ref. Documents
Estimated cost
Bid Submission
10 Nov 2026
8 days left
EMD
10500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Salem → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Mtps-Ii -Es Circle - Tgm&Ca Division - Inspection Of Condenser Tubes Both Hp /Lp Sides, Inspection, Cleaning And Painting Of Corroded Inner Surface Of Condenser Water Box 8 Nos Both Hp & Lp Sides, Inspection And Cleaning Of Hot Wells, Overhauling Of Online Tube Cleaning System Pumps, Cleaning The Ball Collection Screens In Condenser Cooling Water Return Line, Overhauling Of Air Relief Valve In Condenser, Cleaning Of Nozzle Tower In Condenser And Cleaning Of Condenser Tubes (Hp Side)By Water Jet During The Capital Overhauling 2026.
BOQ
| Sl. No. | Item Description |
| 1 | Inspection of HP, LP Side Condenser Tubes and inspection & cleaning of Water Boxes: Dismantling the HP & LP side condenser water box manhole doors 08 Nos and providing approach platform & scaffolding arrangement for inspection/cleaning of HP, LP Condenser water box manhole rubber chords and Box up the condenser water box including consumables and T&P charges. |
| 2 | Painting of HP, LP Condenser water box (Inner Surface):Charges for Painting of corroded inner surface of water box 8 Nos both HP & LP side to an area of 445m² with two coats of anti-corrosive black paint/epoxy (Asian/Berger make) and cost of paints and other cost of required consumables. |
| 3 | Inspection and cleaning of HP, LP Condenser hot well:- Opening the hot well manhole ,providing approach platform for cleaning the hot well, clean both the HP & LP Shell side of condenser hot well by wire brush, renew the hot well manhole rubber chords and Box up both the LHS & RHS condenser hot well including consumables and T&P charges. |
| 4 | Inspection, Cleaning and aligning of OLTCS ball collection screens:Opening of OLTC System outlet Ball collecting screen manhole doors in cooling water outlet line-2Nos , inspection and cleaning the debris in collecting screen, aligning of ball collecting screens and closing of manhole doors with renewal of gaskets. |
| 5 | Overhauling/Repairing/Replacement of Relief valve in surface condenser:Dismantling Relief valve flange, Dismantling all the internals, inspection, cleaning the flange seating area, renewal of gasket and assembling of Relief valve properly. |
| 6 | Overhauling of Ball Circulating Pump:Disconnecting the pump Suction & Discharge lines ,Dismantling the pump from motor, Disconnecting all external fittings from pump casing (cooling pipe , pre gauge ,oil reservoir & air cock).Dismantling the mechanical seal, pump shaft with impeller ,inspection of wear ring & bearings, Replacing if necessary ,reassemble the all parts & commission the pump including the cost of consumables and T&P's. |
| 7 | Strengthening of Condenser: (Packing plate,connecting plate,condenser shell and neck extraction pipe connecting area etc.,) Charges for strengthening of the existing condenser Packing plate,connecting plate,condenser shell and neck extraction pipe connecting area & HP/LP flash tank supporting plates by cutting, edge preparation, rectification & welding of the plates including the cost of consumables and T&P's. |
| 8 | Inspection and cleaning of condensate inlet to flash tank nozzle: This work involves removal of Bend pipe dismantling of bolts & nut inside the flash tank nozzle pipes and removal of nozzles using special tools. After removal of nozzle, inspection and cleaning by air & jet water than assembling of nozzles flanges & pipe bend with suitable gaskets including the cost of consumables and T&P’s. |
| 9 | Cleaning of condenser tubes with water jet cleaning: Charges for cleaning condenser tubes with water jet cleaning including water jet nozzles, hoses and high pressure pumps, allied consumables and T&P’s. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysNov 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender