Tender For Rejuvenation & Restoration Of Ghori Bachera Pond Based On Natural Treatment System With State Of Art Technology In Greater Noida.
Tender Value
1.56 Crore
Estimated cost
Bid Submission
06 Nov 2026
8 days left
EMD
3.14 Lakhs
Bank guarantee accepted
Document Fee
2750
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gautam Buddha Nagar → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Rejuvenation & Restoration Of Ghori Bachera Pond Based On Natural Treatment System With State Of Art Technology In Greater Noida.
BOQ
| Sl. No. | Item Description |
| 1 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. (DSR-2023/2.31) |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineerin- charge. : All kinds of soil (DSR-2023/2.6.1) |
| 3 | Supply of Dewatering Pump 10 HP (MORTH Sno-109, Chapter-20/P746) |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) (DSR-2023/4.1.8) |
| 5 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. |
| 6 | Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. : All works upto plinth level : Concrete of M25 grade with minimum cement content of 330 kg /cum (DSR-2023/5.33.1.1) |
| 7 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. |
| 8 | Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. (DSR-2023/5.33) |
| 9 | All works above plinth level upto floor V level: Concrete of M25 grade with minimum cement content of 330 kg /cum (DSR-2023/5.33.2.1) |
| 10 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. : Thermo-Mechanically Treated bars of grade Fe-500D or more. (DSR-2023/5.22.6) |
| 11 | Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads. Transporting to site, spreading, grading to required slope and compacted to meet requirement of Table No 300-2: lead upto of 10.00KM (MORTH--25/305/3.18) |
| 12 | Supply and spreding of ventonite slurry and consolidation with light power road roller etc at site complete in all respect within all lead and lifts as per direction engineer in charge.Market rate. (Market Rate) |
| 13 | Providing and fixing 90 mm dia, PN-16 / SDR 7.4, 3-layer PP-R (Polypropylene Random Copolymer) pipes conforming to IS 15801, UV-stabilized and anti-microbial, suitable for hot and cold water supply, including all necessary PP-R plain and brass-threaded fittings, fusion welding, cutting, jointing, trenching, refilling, testing of joints and making the complete pipeline functional, complete in all respects as per the direction of the Engineer-in-Charge. (Market Rate) |
| 14 | Providing, fabricating and fixing 600 × 600 mm MS manhole cover made of 3.15 mm thick MS sheet, reinforced/fixed on all sides with ISA 40 × 25 × 5 mm top angle-iron frame, hinged to ISA 35 × 35 × 5 mm bottom angle-iron frame, including providing 20 × 4 mm MS flat holdfasts, 150 mm long, on all sides, complete as per approved drawing. The item shall include cutting, fabrication and welding of MS sheet, angle sections, hinges, 150 mm long handles, MS flats, locking arrangement, surface preparation and application of one coat of approved steel primer, including all materials, labour and incidental works, complete in all respects to the satisfaction and direction of the Engineer-in-Charge. Size: 600 × 600 mm; MS Sheet Thickness: 3.15 mm. (Market Rate) |
| 15 | Providing & making Gabion structure with Mechanically Woven Double Twisted Hexagonal Shaped Wire mesh Gabion Boxes as per IS 16014:2012,MORTH Clause 2500, of required size, Mesh Type 10x12 (D=100 mm with tolerance of ± 2%) Zinc coated, Mesh wire diameter 3.0 mm, mechanically edged/selvedged with partitions at every 1m interval and shall have minimum 10 numbers of openings per meter of mesh perpendicular to twist, tying with lacing wire of diameter 2.2mm, supplied @ 3% by weight of Gabion boxes, filled with boulders with least dimension of 200 mm, as per drawing, all complete as per direction of Engineer-in-charge. (DSR-2023/16.94/AR) |
| 16 | Providing bio media of size 50mm -75mm and 25-40mm free from dirt and dust duly washed complete all leads and lifts Analysis rate (Market Rate/AR) |
| 17 | supply of potted plants at site including carriage within all leads and lifts. (AR/GNIDA) |
| 18 | Habisus (AR/GNIDA) |
| 19 | rubina palm (AR/GNIDA) |
| 20 | Providing, supplying of Floating/Fixed Decorative Aeration Fountain System complete with lily-type nozzle manufactured from high-quality Bronze/Gunmetal/Brass with mirror-finish chrome-plated CNC-machined components of approved make. The fountain shall include, stainless steel support frame, HDPE/SS floating platform (where applicable), anchor system, delivery pipe, valves, electrical cable, control panel, junction box, all necessary fittings and accessories required for satisfactory operation. The item includes loading, transportation, carriage in all leads and lifts, unloading, installation, alignment, testing, commissioning, trial run, and handing over, complete in all respects as per the specifications and directions of the Engineer-in-Charge.MARKET RATE |
| 21 | Providing, supplying, installing, testing and commissioning of submersible pumping set of approved make such as KSB, Kirloskar, Calama, Johnston, Crompton, BS, SABAR, Oswal or equivalent, conforming to the latest relevant BIS/IS standards. The pump shall be fitted with dynamically balanced bronze impeller of suitable alloy, stainless steel shaft, grease-packed/water-lubricated bearings, double mechanical seal in oil chamber, thrust bearing arrangement, corrosion-resistant casing, and suitable protection sleeve for long service life. |
| 22 | The pump shall be directly coupled to a waterproof submersible squirrel cage induction motor of required capacity, operating at approximately 2900 RPM, suitable for continuous duty, complete with thermal overload protection, cable sealing arrangement, and IP68 protection. The item shall include water level guards, starter, control panel, power and control cables, guide rail system (where applicable), delivery pipe, non-return valve (NRV), sluice valve, cable clips, lifting chain, clamps, foundation hardware, all accessories, loading, transportation, carriage in all leads and lifts, installation, testing, commissioning, trial run, and handing over, complete in all respects as per the specifications and directions of the Engineer-in-Charge.MARKET RATE |
| 23 | Providing, supplying, laying, testing and commissioning of 1100 V grade, XLPE insulated, PVC sheathed, armoured copper conductor power cable of 10 sq.mm (Twin Core), conforming to IS 7098 (Part-I) and latest relevant BIS standards. The work shall include excavation of cable trench up to 1.0 m depth, dressing and leveling of trench bed, providing 75 mm thick sand cushioning below and above the cable, laying of cable, protective covering with bricks/RCC cable tiles, warning tape, backfilling with excavated earth, compaction, dressing of surface, cable identification tags, glands, lugs, termination at both ends, earthing of armour, testing for insulation resistance and continuity, loading, transportation, carriage in all leads and lifts, and all labour, tools, tackles, consumables and incidental works required for complete installation as per the specifications and directions of the Engineer-in-Charge.Market Rate (AR/GNIDA) |
| 24 | Supply & planting of plants as required by enineer in charge in 8\\"x12\\" size polythene bags of earth pots..Market rate (AR/GNIDA) |
| 25 | Providing, supplying and safely transporting healthy, disease-free domestic waterfowls (Ducks) of approved breed and size, suitable for pond ecosystem restoration and biodiversity enhancement, complete with veterinary health certification. The item shall include loading, unloading, carriage in all leads and lifts, safe handling during transportation, acclimatization at site, release into the pond, and all labour, equipment, tools, tackles and incidental charges required for successful establishment, complete in all respects as per the directions of the Engineer-in-Charge. (AR/GNIDA) |
| 26 | Big (AR/GNIDA) |
| 27 | Small (AR/GNIDA) |
| 28 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. : In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works (DSR-2023/10.25.2) |
| 29 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture (DSR-2023/13.62.1) |
| 30 | Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.: All kinds of soil (DSR-2025/2.28.1) |
| 31 | Supply of 80mm thick ISI marked Shaped machanically compressed Interlocking cement concerete paver blocks, smooth high laoss finish, skid resistant; manufactured from rubber moulds through vibrocompressiojn mechanism, high pressure and control vibration machine having plan dimension 200 x (160+120mm) with minimum 5mm thick topping. The compressive strength of concerete paver block shall not be less than 30 MPa and weight 4.5kg per No. confirming to IS: 15658-2006. : Gray Base (SOR-2025/2.5(a)) |
| 32 | Laying of Interlocking Tiles of 60/80/100 mm thick including levelling and dressing of surface up to required level and slopes over 30 mm thick bed and filling joints with fine sand including cost of fine sand, labour, T&P etc complete But excluding cost of Tile as directed by Engineer in charge. (SOR-2025/5.5.07) |
| 33 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). (DSR-2025/16.69) |
| 34 | Providing, supplying and fixing heavy-duty outdoor dustbins of minimum 100–120 litre capacity, manufactured from GI/SS (as approved), complete with hinged lid, corrosion-resistant frame/stand, anchor fasteners, concrete foundation (where required), painting/branding, and all necessary hardware. The item shall include loading, transportation, carriage in all leads and lifts, unloading, installation at designated locations, testing for stability, and all labour, tools, tackles and incidental charges required for complete installation, in accordance with the specifications and directions of the Engineer-in-Charge. Market Rate (AR/GNIDA) |
| 35 | Providing, supplying, erecting and fixing 4.0 m high decorative street light poles fabricated from hot-dip galvanised mild steel (GI) pipes of approved make, complete with decorative cast aluminium/cast iron ornamental brackets and embellishments, finished with high-quality weather-resistant polyurethane (PU) paint coating. The pole shall comprise a bottom section of 139.7 mm dia × 1.0 m length, middle/top section of 76.1 mm dia × 3.0 m length, and a top mounting pipe of 63.5 mm (2½ inch) dia × 2.5 m length (or as approved), complete with 300 × 300 × 10 mm thick MS base plate, foundation bolts, nuts, washers, anchor fasteners, and all necessary accessories. The item shall include loading, transportation, carriage in all leads and lifts, unloading, erection, alignment, grouting, fixing over RCC foundation, touch-up painting after installation, and all labour, tools, tackles and incidental works required for complete installation as per the approved drawings and directions of the Engineer-in-Charge. (Excluding electrical wiring, cable, luminaire and control gear unless otherwise specified.). Market Rate (AR/GNIDA) |
| 36 | Providing, supplying, laying, testing and commissioning of 1100 V grade, XLPE insulated, PVC sheathed, armoured copper conductor power cable of 10 sq.mm (Twin Core), conforming to IS 7098 (Part-I) and the latest relevant BIS standards. The work shall include excavation of cable trench up to 1.0 m depth, dressing and levelling of trench bed, providing 75 mm thick sand cushioning below and above the cable, laying of cable, protective covering with first-class bricks/RCC cable tiles, warning tape, backfilling with excavated earth in layers, compaction, dressing of surface, cable identification tags, glands, lugs, termination at both ends, earthing of cable armour, testing for insulation resistance and continuity, and all labour, tools, tackles, consumables and incidental works required for complete installation. The item shall also include loading, transportation, carriage in all leads and lifts, unloading, and commissioning, complete in all respects as per the specifications and directions of the Engineer-in-Charge. Market Rate (AR/GNIDA) |
| 37 | Providing, supplying, erecting, testing and commissioning of 40 W LED Post Top Luminaire of approved make and model (e.g., Bajaj, Crompton, Havells, Philips/Signify, Wipro, CG or equivalent), suitable for outdoor landscape and pathway lighting. The luminaire shall be pressure die-cast aluminium housing with high-efficiency LED module, polycarbonate/tempered glass diffuser, integrated LED driver, IP66 protection, surge protection, operating voltage 140–270 V AC, system efficacy not less than 120 lm/W, CCT 3000K/4000K/5700K as approved, CRI ≥70, and minimum 50,000 burning hours (L70). The item shall include all mounting accessories, nuts, bolts, clamps, connector, internal wiring from terminal block to luminaire, fixing on decorative pole, loading, transportation, carriage in all leads and lifts, erection, testing, commissioning, and all labour, tools, tackles and incidental works required for complete installation, excluding external power cable and control panel, complete in all respects as per the specifications and directions of the Engineer-in-Charge. Market Rate (AR/GNIDA) |
| 38 | Providing, supplying, erecting, testing and commissioning of decorative outdoor LED Fancy Lights (Ladder/String Type), 6.0 m length per pole, suitable for wrapping around decorative poles from bottom to top. The lighting system shall comprise weatherproof, energy-efficient LED string lights with UV-resistant insulated cable, IP65 or higher protection, low power consumption, high brightness LEDs, and suitable for continuous outdoor operation. The item shall include all necessary mounting accessories, clips, ties, connectors, waterproof joints, power leads, fixing materials, and complete installation on the pole. The work shall include loading, transportation, carriage in all leads and lifts, erection, testing, commissioning, and all labour, tools, tackles, consumables, and incidental works required for complete installation as per the specifications and directions of the Engineer-in-Charge. Market Rate (AR/GNIDA) |
| 39 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. : 150 mm nominal dia Pipes (DSR-2023/18.9.10/AR) |
| 40 | Centering and shuttering including strutting, propping etc. and removal of form for : (DSR-2023/5.9) |
| 41 | Foundations, footings, bases of columns, etc. for mass concrete (DSR-2023/5.9.1) |
| 42 | Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.(DSR-2023/5.9.2) |
| 43 | Suspended floors, roofs, landings, balconies and access platform (DSR-2023/5.9.3) |
| 44 | Design drawing and vetting charges ( 3%) rejuvenation and restoration of existing structures on item no-2 and water tretment system for pond on item no-1 to 3 integrated development works on item no 1to3&6 |
| 45 | Labour cess and GST will be paid extra as per Govt. orders. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysNov 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender