Tender For Addn/Altn To Flooring, Wall Paneling And Allied Electrical Works To Bldg No P-02 Of Hq Corps Under Age B/R-Ii Of Ge (N) Ambala Cantt
Tender Value
9.70 Lakhs
Estimated cost
Bid Submission
17 Nov 2026
20 days left
EMD
19400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ambala → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addn/Altn To Flooring, Wall Paneling And Allied Electrical Works To Bldg No P-02 Of Hq Corps Under Age B/R-Ii Of Ge (N) Ambala Cantt
BOQ
| Sl. No. | Item Description |
| 1 | Schedule 'A' Part-I (B/R itmes)Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as specified and directed . |
| 2 | Material and labour for Vitrified ceramic tiles 9-10mm thick (Square/rectangular) polished area of each tiles exc 0.42 Sqm but n. exc 1.00 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured (Light Shade) cement to match over & including 15 mm thick screed bed or bedding layer of cement mortar (1:6) for laying floor finishes complete all as specified and directed . |
| 3 | Material and labour for Vitrified ceramic tiles 9-10mm thick (Square/rectangular)polished area of each tiles exc 0.42 Sqm but n. exc 1.00 Sqm and jointed in neat cement slurry and pointed in white or coloured (Light Shade) cement to match over and incl backing coat 10 mm thick in cement mortar 1:4 for laying skirting/ dados and vertical surfaces etccomplete all as specified and directed . |
| 4 | Dismantling of wall and ceiling boards (Fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified. |
| 5 | Material and labour for premium quality wooden wall panelling using High-Density High-Moisture-Resistant (HDHMR) board in two layers. First layer of 18mm thick (HDHMR) board fixed to wall with screws etc. & than making frame work on it using (HDHMR) board fillets of size exceeding 13 sqcm but not exceeding 25 sqcm of sectional area with horizontal & vertical spacing @1.20m c/c and than fixing 2nd layer of 18mm thick (HDHMR) board to frame work, including 03 to 04 mm thick natural wood sliced veneers ply, design /shade as approved by GE /Engr-In-Charge, fixed on (HDHMR) board with appropriate bonding or fixing material /resins etc., including interlocking precision joint for tight & clean alignment and making designer wooden cornices etc and applying two or more coats or melamine polish by using spray gun and including preparation of base on veneers ply by applying melamine sealers etc. to make it glossy smooth surface. The unit rate also including for making necessary openable shutter /covers with connected accessories for electric switch /socket board of appropriate size in wall panelling complete all as specified and directed.Note : The design/ shade of veneers ply and shade/colour of melamine polish shall be approved by Engr-In-Charge/GE |
| 6 | Material and labour for 25 mm thick PCC cement concrete type B-0, 1:2:4 (using 12.50mm graded stone aggregate) in floor as PCC base padding for tiling/wooden flooring etc complete all as specified and directed . |
| 7 | Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface including any sunk or raised moulding at different levels with approved design/pattern for fans/lights if any over GI frame work and reinforced with G.I. wire mesh of galvanised steel wire 1.40mm dia and size of mesh 12mm fixed with tinned tacks of stainless steel staples/self tapping screws and washers including providing and fixing of GI perimeter channel of 0.5 to 0.6 mm thickness with GI suspension rods, compatible connectors for false ceiling including two coats of premium acrylic emulsion paint over a coat of primer on ceiling surfaces, complete all as specified and directed. |
| 8 | Schedule 'A' Part-II (E/M itmes)Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete including all fittings and fixtures such as switches, pendant, lamp holder, socket outlet, etc and removing unserviceable materials from site of work and making good disturbed surfaces of walls, floors with cement mortar and white/colour wash to match with existing surfaces etc complete all as specified and as directed. |
| 9 | Material and labour for concealed point wiring complete with 1.5 Sqmm single core multistranded copper conductor FRLS PVC insulated and unsheathed cable 1100 volts grade drawn through and including medium grade, ISI marked, PVC conduit,medium grade ISI marked not less than 20 mm dia with accessories fixed concealed/surface type on wall/ roof/ ceiling and including provision of 1.50 sqmm single core PVC insulated, unsheathed cable FRLS-H, 1100 volt grade ISI marked with multi stranded copper conductor green colour as earth conitnuity conductor and connected to common earth dolly with suitable size lugs, including mild steels sunken box or pressed steel terminal box or pressed steel terminal boxes made out of mild steel sheet metal conforming to IS-5139(pt-1) of 1969 and IS:14772:2000 with earth dolly and coated with two coat of anti corrosive paint over a coat of red oxide primer both internally and externally with and including (provision of new) modular covered plate over sunken box for housing the modular switches, socket outlets., fan regulators etc with brass screws and brass washers and making good the disturbed surfaces as per existing for one light/fan/exhaust fan/bell point controlled by one way switch, complete all as specified and as directed by Engineer-in-Charge. :-Note:-1 Modular metal flush / sunken box, and for modular switch/ socket cover plate & sheet are inclusive in the item rate quoted.2. Only switch, socket and fan regulators to be measured and paid seperately. |
| 10 | Description all as per serial item No.09 here-in-before but for One 3 pin, 6 Amps, socket outlet controlled by one switch on independent board, complete all as specified and as directed. |
| 11 | Description all as per serial item No.09 here-in-before but for One 3 pin 6 Amps socket outlet controlled by one switch on same board, complete all as specified and as directed. |
| 12 | Material and labour for concealed point wiring complete with 4.0 Sqmm single core multistranded copper conductor FRLS PVC insulated and unsheathed cable 1100 volts grade drawn through and including medium grade, ISI marked, PVC conduit,medium grade ISI marked not less than 20 mm dia with accessories fixed concealed/surface type on wall/ roof/ ceiling and including provision of 4.0 sqmm single core PVC insulated, unsheathed cable FRLS-H, 1100 volt grade ISI marked with multi stranded copper conductor green colour as earth conitnuity conductor and connected to common earth dolly with suitable size lugs, including mild steels sunken box or pressed steel terminal box or pressed steel terminal boxes made out of mild steel sheet metal conforming to IS-5139(pt-1) of 1969 and IS:14772:2000 with earth dolly and coated with two coat of anti corrosive paint over a coat of red oxide primer both internally and externally with and including (provision of new) modular covered plate over sunken box for housing the modular switches, socket outlets., fan regulators etc with brass screws and brass washers and making good the disturbed surfaces as per existing for one switch socket point controlled by one way switch, complete all as specified and as directed by Engineer-in-Charge. :-Note:-1 Modular metal flush / sunken box, and for modular switch/ socket cover plate & sheet are inclusive in the item rate quoted.2. Only switch, socket and fan regulators to be measured and paid seperately. |
| 13 | Supply and fixing of modular switch 1 module, single pole, one way 6 Amps flush type, 230 volts complete all as specified and as directed. |
| 14 | Supply and fixing of modular switch 1 module, single pole, one way 16 Amps flush type, 230 volts complete all as specified and as directed. |
| 15 | Supply and fixing of modular socket outlet multipin, 6/16 Amps, one way, two module, 230 volts complete all as specified and as directed. |
| 16 | Supply and fixing of modular socket outlet 3/3 pin combined, (6pin), 6 and 16 Amps, one way, two module, 230 volts complete all as specified and as directed. |
| 17 | Supply and fixing of modular bell push 6 Amp, 1 way, 1 module, 230 volts complete all as specified and as directed. |
| 18 | Supply and fixing in repair calling bell, ding dong, 230 volt, complete all as specified and as directed by the Engineer-in-Charge. |
| 19 | Supply and fixing ceiling rose surface type 2/3 terminal polycarbonate, isolated body complete all as specified and as directed. |
| 20 | Material and labour submain wiring with 3 runs of copper conductor FRLS PVC insulated unsheathed cable 1100 volt grade 4.0 sqmm drawn through PVC conduit medium grade ISI marked 25mm dia as per IS specification fixed concealed in wall/ceiling including conduit and conduit accessories and incl provn of PVC insulated 4.0 Sqmm FRLS multistranded copper conductor as earth continuity conductor connected to earth dolly all as specified including dismantling old and making good to the disturbed surface by plastering and two coat of distamper all as directed at site Note : three runs of 4.0 sqmm cable alongwith one run of 4.0 sqmm PVC insulated unsheathed copper conductor as earth wire, conduit and conduit accessories will be measured as one length. |
| 21 | Material and labour submain wiring with 4 runs of copper conductor FRLS PVC insulated unsheathed cable 1100 volt grade 10.0 sqmm drawn through PVC conduit medium grade ISI marked 25mm dia as per IS specification fixed concealed in wall/ceiling including conduit and conduit accessories and incl provn of PVC insulated 10.0 Sqmm FRLS multistranded copper conductor as earth continuity conductor connected to earth dolly all as specified including dismantling old and making good to the disturbed surface by plastering and two coat of distamper all as directed at site Note : four runs of 10 sqmm cable alongwith one run of 10 sqmm PVC insulated unsheathed copper conductor as earth wire, conduit and conduit accessories will be measured as one length. |
| 22 | Supply and fixing 9/12 watt LED light fitting wall mounting fixture (Sketch type) including E-27 LED lamp compact and energy efficient epoxy powder coated luminaire and connecting with copper conductor flexible cable form ceiling rose to connector of the light complete including removing unserviceable light fittings complete all as specified and as directed . |
| 23 | Supply and fixing 20 watt LED light fitting, 3000K, wall mounting fixture (sleek precise design) compact and energy efficient epoxy powder coated luminaire and connecting with copper conductor flexible cable from ceiling rose to connector of the light, complete including removing unserviceable light fittings, complete all as specified and as directed . |
| 24 | Supply and fixing Recess mounting LED 15/18 watt cool/warm type circular down lighter/ COB panel with PVC housing, 240 volt, 50HZ, AC supply complete with all accessories internally pre wired including connecting with 3 core flexible copper conductor from ceiling rose to connector of the light, including disconnecting and taking down existing old unserviceable fitting complete all as specified and as directed . |
| 25 | Supply and fixing PVC Body Ventilation Fan 250 mm Sweep, 1200 RPM, complete with Louvers shutter Easy to Mount including removing unserviceable fan complete all as specified and as directed . |
| 26 | Supply and fix MCB TPN 63 Amps, 415 volt,10 KA , as per site requirement including removing old unserviceable MCB complete all as specified and as directed . |
| 27 | Supply and fix MCB SP, 6-32 Amps, 240 volt,10 KA , 'B' curve as per site requirement including removing old unserviceable MCB complete all as specified and as directed . |
| 28 | Supply and fix sheet metal MCB DB TPN 6 way with 200 Amps rated bus bar tripal pole and neutral double door IP-54 fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection, including making smooth the disturbed surfaces including removing old unserviceable enclosure, complete all as specified and as directed . |
| 29 | Material & labour as in repair for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5mtr below the normal ground level connected to galvanised earth wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron.Earth strip protected by GI pipe 15mm bore(medium grade) and connected to earthing test point as directed and as specified and shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 40 cm x 40cm x 5cm reinforced with 8mm dia TMT bars @ 15cm c/c both ways with one handle for lifting made out of 8mm dia bar, funnel, wire mesh, 20mm dia GI pipe medium grade for watering, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil and testing complete all as directed by Engineer-in-Charge. |
| 30 | Note:- Amount of credit of Rs.3,304.00 for retrieved materials is mentioned in Schedule of Credit Page No.123 of tender documents in pdf form which will be deducted offline while acceptance of tender. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysNov 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender