Tender For Provn Of Certain Sanctioned Revenue Works And Minor Works In The Area Of Age B/R-I Under Ge (West) Delhi Cantt-10
Tender Value
48.13 Lakhs
Estimated cost
Bid Submission
14 Nov 2026
1 days left
EMD
96260
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Certain Sanctioned Revenue Works And Minor Works In The Area Of Age B/R-I Under Ge (West) Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm watering and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and directed. |
| 2 | PCC 1:2:4 type B1 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specificed and as directed by Engr-in-Charge. |
| 3 | Surface excavation n exc 30cm deep and averaging 15cm deep including getting out in hard/dense soil complete all as specificed and as directed by Engr-in-Charge. |
| 4 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point as directed by Engr-in-Charge. |
| 5 | M&L for 100 mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base flooring complete all as specified and as directed. |
| 6 | M&L for sand bedding/cushioning under interlocking tiles floor complete. |
| 7 | M&L for minimum 80mm thick precast PCC interlocking Glossy blocks of grade M-40 single layer monolithic high density manufactured by electro vibro hydraulically operated block making machine confirming to IS-15658 : 2006 finished coloured tile to make a pattern as directed,complete all as specified and directed. |
| 8 | M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in coping, bed plates, kerbs including weathering slightly rounded or chamfered and throating and moulding the edges of interlocking tiles complete |
| 9 | M&L for mild steel work with square/rectangular section in post, Roof trusses (framed), trussed, purlins, rafter, crane gantries, wind ties, rails and fastenings and heavy bracket, framing of tube sections including distance pieces, cleats, MS plates, nut & bolts etc complete all as specified and as directed. |
| 10 | M&L for preparation of new steel & iron surfaces of any description over 10cm in width or girth not otherwise described and applying two coats of syntethic enamel paint over a coat of red oxide primer complete all as specified & directed. |
| 11 | S&F of Pre-painted galvalume aluminium zinc coating (150 GSM) GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws all as specified and as directed by Engr-in-Charge. |
| 12 | Dismantling Brick tiles or terracing tiles, single layer on roofs including thatching any type, mud phuska etc including cleaning the surface by water/air pressure and removal of debrish beyond MOD land complete all as specified and directed (Note : Height of bldg upto 4th story). |
| 13 | M&L for brushing neat cement slurry with 3.Kg of cement per sqm complete all as specified and directed |
| 14 | M&L for cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in roof padding/kerb, mud slopes, rounded or chamfered edge complete all as specified and directed Please Enable Macros to View BoQ information |
| 15 | M&L for cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in roof padding/kerb, mud slopes, rounded or chamfered edge complete all as specified and directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayNov 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender