Tender For Construction Of 400Mm X120 M Deep High Yield Gravel Packed Tube Well, 5000 Liters Capacity Hdpe Water Storage Tank With Rising Distrbution Mains & Installation Electric Motor Pump Of 1.5 H.P. For Barhawa Police Station, Panchayat-Barharwa
Tender Value
4.90 Crore
Estimated cost
Bid Submission
10 Nov 2026
13 days left
EMD
9.80 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chatra → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of 400Mm X120 M Deep High Yield Gravel Packed Tube Well, 5000 Liters Capacity Hdpe Water Storage Tank With Rising Distrbution Mains & Installation Electric Motor Pump Of 1.5 H.P. For Barhawa Police Station, Panchayat-Barharwa , Block-Barharwaunder D.W.& S.Division, Sahibganj In The Year 2026-27 On Tunr Key Basis. (Deposit Head)
BOQ
| Sl. No. | Item Description |
| 1 | Construction of 400 mm dia x 120.00 m deep HYGPT Bore wellCost of Transportation of drilling plant and other equipments accessories and materials as required at drilling site etc. all complete job as per direction of E/I. |
| 2 | Supplying all tools and materials making arrangement additional water required during developing and retesting etc. all complete job. |
| 3 | HYGPT :Drilling of 400mm dia with TC drill bit for tube wells in all kinds of soil including moorum, hard soil, soil mixed with pebbles, shingles, compacted soil, clay, soft and decomposed rock etc., up to 60 meters depth including reaming to facilitate smooth lowering of casing pipe etc. as per specification and direction of E/I.DWSD Item 118 (ii) |
| 4 | HYDT :Cost of drilling 200mmX165mmX125 Mtr deep bore well in all kinds of soil and rock in rural area for installation of pump bore set with Hydraulic DTH Rig machine, all complete including supplying all materials, tools, drilling rig, Air Compressor and equipments, as well as fuel, lubricants and cost of transportation of Rig machine and other vehicles up to the site. (DWSD Item 119 (ii) |
| 5 | Supplying all tools, tackles & lowering of 200 mm dia MS ERW casing pipe of 6mm wall thickness including welding charges, cost of pipe etc. all complete job. (DWSD Item 120) |
| 6 | Supplying all tools, tackles & lowering of 200 mm dia MS scree pipe as per a strainer casing pipe and protecting the sides from falling during the process of drilling etc. including cost of pipe etc. all complete job. (DWSD item 120M 1026) |
| 7 | Supplying all materials, labour, tools & equipments for fitting & fixing 200mm dia MS cap over casing pipe complete job. (DWSD Item 120 B) |
| 8 | Providing gravel packing with approved best quality gravel in uniformly graded size between 3.16mm(1/8’’)to 9.53mm(3/8’’) including collection ,stacking ,washing &packing in the annular space between the bore hole and the other surface of casing pipe in layer of suitable thickness in the under space as required rate by manual , including all lead& lift ,tec. All complete as per direction of E/I (As per old model estimate) |
| 9 | Supplying all tools, equipment and labour and doing washing, flushing and developments of drilling tube-well to give clean and clear water all complete as per direction of E/I. (DWSD Item 126) |
| 10 | Installation of 5000 liters Capacity Water Storage TankProviding and fixing HDPE container Syntex or alike one piecemolded water tank made out of low density polythyler andbuilt corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity 5000.00 litres Capacity Water storage Tank |
| 11 | Transportation Charge |
| 12 | Lifting of 5000 Litrs Capacity Tank up to 4.00m height with lifting tools with rope and labour |
| 13 | Making hole in Tank |
| 14 | Making long screw in G.I. pipe including supplying and fitting jam nuts and extra socket etc. |
| 15 | Rising and Distribution Network Earth work in excavation in foundation trenches in hard soil (Vide Classification soil item B) and disposal of excavated earth as obtained to a distance up to 50 Mtr. including all lifts, leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, specification and direction of E/I. |
| 16 | Providing earth work in backfilling the trenches after laying of pipes with earth removed during excavation within initial kead and lift as per specification and direction of E/I |
| 17 | RISING MAIN(a)Manufacture, supply and Delivery & laying of following Nominal dia UPVC pipes. (50mm dia) |
| 18 | (b)Manufacture, supply and Delivery of PVC sh-80 column pipe for moter lowring |
| 19 | Providing UPVC fittings(a) UPVC COUPLER ( 50mm dia) |
| 20 | (b) ELBOW (50mm dia) |
| 21 | DISTRIBUTIONProviding and supplying & laying UPVC pipes 32 mm dia Pipe- |
| 22 | 25mm dia pipe Pipe- |
| 23 | Supplying and fixingUPVC fittings (1) Reducing elbow ( 32mm x 25mm ) |
| 24 | (2)UPVC COUPLER (a) 32mm dia |
| 25 | (b)25mm dia |
| 26 | (3)Reducing Tee (a) 25mm x 15mm dia upvc female threaded brass tee |
| 27 | Providing & fixing GI fittings (a) Nipple (15mm dia ) |
| 28 | Providing and fixing Gun Metal full way valve of approved quality, all complete, as per specification and direction of E/I.(a)50 mm dia weight not less than 1.5kg |
| 29 | Providing and fixing Gun Metal gate valve with CI wheel of approved quality (screwed end)(b)32 mm dia and weight not less than 700 gms |
| 30 | Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design.With common burnt clay F.P.S.(non modular) bricks of class designation 7.5Full way valve chamber |
| 31 | Providing and fixing of male ended C.I.Body brass spindle valve and seat Bib cock of approved quality with extra socket all complete as per specification and direction of E/I.15 dia and weight not less than 400 Gm |
| 32 | Hnad wash cum platformEarth work in excavation in foundation trenches in ordinary soil (vide classification of soil item-B ) and disposal of excavated earth as obtained to a distance up to 50 m including all lifts,levelling,ramming the foundation trenches, removing roots of trees shrubs all complete as per approved design, building specification and direction of E/I. |
| 33 | Providing coarse clean sand filling in foundation trenches |
| 34 | Providing 75A BRICK flat soling in foundation |
| 35 | Providing pcc(1:3:6) in foundation and plinth |
| 36 | Providing designation 75 A Brick work in C.M(1:6) in foundation and plinth with approved quality of clean coarse sand of F.M.2 to2.5 including providing 10mm thick mortar joints, cost of screening,scaffolding,raking out joints to 15mm depth,curing,taxes and royalty all complete as per building specification and direction of E/I. |
| 37 | Providing designation 75 A Brick work in C.M(1:6) in superstructure with approved quality of clean coarse sand of F.M.2 to2.5 including providing 10mm thick mortar joints, cost of screening,scaffolding,raking out joints to 15mm depth,curing,taxes and royalty all complete as per building specification and direction of E/I |
| 38 | Providing Eearth work in back filling |
| 39 | Providing pcc(1:2:4) in foundation & plinth |
| 40 | Providing 12 mm cement plaster (1:4) withpunning & clean coarse sand of F.M 1.5 including cost of screening, curing with all leads and lifts of water,scaffolding,taxes and royalty all complete as per building specification and direction of E/I. |
| 41 | Providing 50mm thick cement concrete flooring (1:2:4) with 20mm to 6mm size graded stone chips with flooring coat of neat cement in panels do do |
| 42 | Carriage of Materials(a)sand -20Km. Avg. |
| 43 | (b)Stone chips-10Km. Avg. |
| 44 | (c) Bricks-08Km. Avg. |
| 45 | (d)cement-05Km. Avg. |
| 46 | Bore well Brick Masonry Protection ChamberEarth work in excavation in foundation trenches in ordinary soil (vide classification of soil item-B ) and disposal of excavated earth as obtained to a distance up to 50 m including all lifts,levelling,ramming the foundation trenches, removing roots of trees shrubs all complete as per approved design, building specification and direction of E/I. |
| 47 | Providing designation 75 A Brick work in C.M(1:6) in foundation and plinth with approved quality of clean coarse sand of F.M.2 to2.5 including providing 10mm thick mortar joints, cost of screening,scaffolding,raking out joints to 15mm depth,curing,taxes and royalty all complete as per building specification and direction of E/I |
| 48 | Providing pre cast R.C.C.M-150 in nominal mix of (1:2:4) slab of desire size with approved quality of stone chips (20mm to 6mm size) graded and clean coarse of F.M 2.5 to 3 including curing (but excluding the cost of reinforcement),taxes and royalty all complete as per building specification and direction of E/I. |
| 49 | Providing T.M.T steel reinforcement of different dia rods as per approved design and drawing including carriage of M.S bars to work site, cutting bending and binding with annealed wire with cost of wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. |
| 50 | Providing 12 mm cement plaster (1:6) with clean coarse sand of F.M 1.5 including cost of screening, curing with all leads and lifts of water,scaffolding,taxes and royalty all complete as per building specification and direction of E/I. |
| 51 | Carriage of Materials(a)sand -20Km. Avg. |
| 52 | (b)Stone chips-10Km. Avg. |
| 53 | (c) Bricks-08Km. Avg. |
| 54 | (d)cement-05Km. Avg. |
| 55 | (d)Steel Reinforcement-05Km. Avg. |
| 56 | Provision of Submersible Pump Sets upplying submersible pump sets confirming to IS 8034 and motor confirming to IS 9283. Pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/ noryl impeller. Motor suitable for working on 415V÷10%, 3PH, 50 Hz, A.C. supply with cable guard, thrust carbon/ fiber bearing to withstand entire hydraulic thrust, water proof winding shall be provided. The pump set shall be suitable for direct coupling. Pump shall have suitable outlet as per manufacturers design. Anti thrust stream lined non return valve shall be provided with pump. 3 meter submersible copper conductor cable in single/ double run shall be provided with each pump. Submersible Pump set 150 mm dia (with Bronze/SS Impeller) up to 8 stages1.5H.P. (24022+ cp & overhaed charges 14.95%) |
| 57 | Starter D.O.L. starter with SS Enclouser with 380/415 Volt Coil |
| 58 | 3 core PVC Insulated , PVC Sheathed copper conductor flat submersibile cable |
| 59 | Rope for submersible hang |
| 60 | Add 18 % GST |
| 61 | Add 1% L Cess Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysNov 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender