Tender For Macadamization Of Road Wadder Bala Via Wadder Payeen Upto Bangus (Balance Portion)
Tender Value
1.17 Crore
Estimated cost
Bid Submission
02 Nov 2026
2 days left
EMD
2.35 Lakhs
Bank guarantee accepted
Document Fee
2600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kupwara → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Macadamization Of Road Wadder Bala Via Wadder Payeen Upto Bangus (Balance Portion)
BOQ
| Sl. No. | Item Description |
| 1 | Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in -All kinds of soil. |
| 2 | Providing, laying, and compacting graded granular sub-base (GSB) material conforming to Clause 401 of MoRTH specifications (latest revision), including loading, unloading, carriage, spreading in layers not exceeding 200 mm (loose) thickness, watering, and compaction with vibratory roller to achieve the required density and CBR value as per approved design and lines, grades, and cross sections complete |
| 3 | Providing, laying, spreading and compacting Water Bound Macadam (WBM) using clean, hard, durable and approved coarse aggregate of 63–45 mm size, to a compacted thickness of 75 mm, including hand packing, rolling with 8–10 tonne three-wheeled road roller/vibratory roller, application and brooming of approved screenings and binding material to fill the interstices, watering, rolling and thorough compaction to the required grade, camber and density, complete as per specifications and as directed by the Engineer-in-Charge. |
| 4 | Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) pecification including premixing the material aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, as per specifications and directions of Engineer-in-Charge Complete |
| 5 | Providing and applying tack coat using hot straight run bitumen of grade –VG-10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications. On W.M.M. @ 0.75 Kg/sqm. |
| 6 | Providing and laying of 50 mm thick BM with bitumen of VG-10 grade @3.5% and filler (lime) 34% by weight of total mix on prepared surfaces with specified grade stone aggregate. Hot mixing of bitumen with filler and stone aggregate. In hot mix plant transporting the mixed material with paver finisher and rolling with road roller as per IRC/ MOST/MORTH specification to achieve the desired density and compaction including cost and carriage involved from source to site of work completed . |
| 7 | Providing and laying of 25 mm thick Semi Dense bituminous macadam course using mineral aggregate satisfying the gradation set out in specifications with 5% Binder content (by weight of total mix ) with the aid of hot mix plant and paver finisher including roller with road roller of 8 to 10 tone capacity to achieve the required density and compaction including cost and carriage of all materials and labour loading ,unloading and all taxes involved on account of labour and material including Bitumin complete |
| 8 | Providing and laying of 6 mm seal coat of premixed fine aggregate (passing 2.36mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of VG -10 grade bitumen per cum of fine aggregate and 0.60cum of fine aggregate per 100sqm of road surface including rolling and finishing with road all complete including cost and carriage of materials and labour , loading ,unloading and all taxes involved on account of labour and material including Bitumin complete |
| 9 | Providing and laying reinforced cement concrete pipes, NP3 class, 900 mm internal diameter, conforming to IS 458, including jointing with cement mortar 1:2, laying to the required line and level, including all labour, materials, tools and plants, complete as specified and directed by the Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysNov 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender