Tender For Multiple Works For Lighting In Mini Secretariat And Kulgam Town Under District Capex Regular Sector (Untied Grants) And Findc2627111424-Installation Of Highmass Lights At Gopalpora Under Bdc Grants 2026-27.
Tender Value
10.44 Lakhs
Estimated cost
Bid Submission
12 Nov 2026
12 days left
EMD
20880
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kulgam → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Multiple Works For Lighting In Mini Secretariat And Kulgam Town Under District Capex Regular Sector (Untied Grants) And Findc2627111424-Installation Of Highmass Lights At Gopalpora Under Bdc Grants 2026-27.
BOQ
| Sl. No. | Item Description |
| 1 | Supply, Erection, Testing and commissioning of 9.0 mtr Long GI (65 micron DFT single dip) Octogonal poles uniformally tappered with thickness of 3mm with bottom/top Dia of 175 mm x 70mm & base plate of 275x275x16mm/pcd 250 mm provided with proper door opened gear box for connections on the bottom side with G.I. Foundation Bolts (J Type) M24x750 mm long (Set of 4 no.’s per pole) ,(standard make) including providing and fixing of suitable sign board, mentioning DOS, DOC, Estimated Cost,etc. |
| 2 | Laying of RCC foundation for 9.0 mtr. Long Octagonal poles including proper curing. 0.6mX0.6mX1.2m (RCC with concrete ratio 1:1.5:3 with minimum 8 Nos. of 12 mm dia longitudinal MS reinforcement rods with rings of 8 mm dia not more than 200 mm C.C for fixing the pole). |
| 3 | Supplying and fixing of Earthing of Octagonal Pole Complete by GI Pipe 40 mm or GI Rod 20mm 3 mtr long through GI Strip (25x3)mm |
| 4 | Pre fabricated galvanized four way ring type top bracket (700 mm radius with 48.3 OD GI Pipe) to be fitted on top of octogonal pole for hodling lights. |
| 5 | Providing and fixing of Cable Termination & Luminary connections using 4-way terminal block/ connectors & four no. of 1 amp MCB with strip (Legrand/Havells make or equivalent) including copper lugs, nuts& bolts,washers etc for poles with two way type bracket to be fitted properly inside the door opened gear box provided on the bottom side of the pole. (Complete Job) |
| 6 | Supply ,installation ,testing and commissioning of outdoor type 100 watt LED Flood light(10000 lumens), IP66 of BAJAJ/GE/HPL/ HAVELLS/WIPRO/ PHILLIPS/ CROMPTON or any approved vendor by KPDCL make suitable for above high mast application complete with minimum (DLP) two years of onsite replacement warranty.This also includes Auto ON/OFF Day Night Sensor. |
| 7 | 1.5 sq.mm PVC insulated flexible copper wire for service connections from connection plate to the LED luminary individual circuit including loop & earthings laid properly including bunching (Havells/polycab/KEI/Anchor/Plaza make or equivalent) |
| 8 | 16 mm²Cable (2C) from LT Line to meter ,1.1k V Grade, Armoured, XLPE FRLS type to be carried through conduit/pipe underground or A/G only in case of site constrains. The cable shall include end termination lugs with its crimping /taping. (Havels/polycab or equivalent make) |
| 9 | Provinding and fixing of Miscellaneous items like Alumunium cable thimbles/lugs at termination points, insulation tape , binding wire, screws, etc as required for commissioning of the HM lights. |
| 10 | Providing and fixing of Single Phase Energy Meter 5-30 Amp along with Polypropylene weather proof outdoor type Meter Box with Zinc plated clamps |
| 11 | Providing and fixing of Surge Protector for the 100 Watt LED type lighting fixture complete. |
| 12 | Providing of 6Amp, DP MCB (legrand/havells make or equivalent) including copper lugs, nuts & bolts washers etc for poles to be fitted properly inside the door opened gear box provided on the bottom side of the pole. |
| 13 | Providing and fixing of 400A, 4-P, 415V MCCB, 36KA Panel Mounted including copper lugs nuts & bolts washers etc for poles to be fitted properly. |
| 14 | Providing and fixing of 200A, 4-P, 415V MCCB, 16KA Panel Mounted including copper lugs nuts & bolts washers etc for poles to be fitted properly. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysNov 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender