Tender For Estimate For The Shifting Of The Various Size Of D.I. / H.D.P.E. Pipe Line Under B.D.A. Project (Arc).
Tender Value
2.33 Crore
Estimated cost
Bid Submission
05 Nov 2026
2 days left
EMD
4.66 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bharatpur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Estimate For The Shifting Of The Various Size Of D.I. / H.D.P.E. Pipe Line Under B.D.A. Project (Arc).
BOQ
| Sl. No. | Item Description |
| 1 | Item Code [R1 2023 1.1 + R1 2023 1.1.3]: Providing, lowering, laying in trenches, aligning, fixing in position and jointing Ductile Iron (DI) ISI marked K-7 grade S&S pipes as per IS:8329-2000 (amended up to date), with internal cement mortar lining suitable for potable water with rubber ring (EPDM) joints as per IS: 5382-1985 including all taxes (Central and local), transportation and freight charges, inspection charges, loading/ unloading charges, including cost of labour and material, specials (Tee, bend etc.) satisfactory hydraulic testing, disinfection, commissioning etc. complete as per technical specifications and direction of Engineer-in-charge. (excluding earth work) Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately. 150 mm |
| 2 | Item Code [R1 2023 1.1 + R1 2023 1.1.4]: Providing, lowering, laying in trenches, aligning, fixing in position and jointing Ductile Iron (DI) ISI marked K-7 grade S&S pipes as per IS:8329-2000 (amended up to date), with internal cement mortar lining suitable for potable water with rubber ring (EPDM) joints as per IS: 5382-1985 including all taxes (Central and local), transportation and freight charges, inspection charges, loading/ unloading charges, including cost of labour and material, specials (Tee, bend etc.) satisfactory hydraulic testing, disinfection, commissioning etc. complete as per technical specifications and direction of Engineer-in-charge. (excluding earth work) Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately. 200 mm |
| 3 | Item Code [R1 2023 1.1 + R1 2023 1.1.5]: Providing, lowering, laying in trenches, aligning, fixing in position and jointing Ductile Iron (DI) ISI marked K-7 grade S&S pipes as per IS:8329-2000 (amended up to date), with internal cement mortar lining suitable for potable water with rubber ring (EPDM) joints as per IS: 5382-1985 including all taxes (Central and local), transportation and freight charges, inspection charges, loading/ unloading charges, including cost of labour and material, specials (Tee, bend etc.) satisfactory hydraulic testing, disinfection, commissioning etc. complete as per technical specifications and direction of Engineer-in-charge. (excluding earth work) Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately. 250 mm |
| 4 | Item Code [R1 2023 1.1 + R1 2023 1.1.6]: Providing, lowering, laying in trenches, aligning, fixing in position and jointing Ductile Iron (DI) ISI marked K-7 grade S&S pipes as per IS:8329-2000 (amended up to date), with internal cement mortar lining suitable for potable water with rubber ring (EPDM) joints as per IS: 5382-1985 including all taxes (Central and local), transportation and freight charges, inspection charges, loading/ unloading charges, including cost of labour and material, specials (Tee, bend etc.) satisfactory hydraulic testing, disinfection, commissioning etc. complete as per technical specifications and direction of Engineer-in-charge. (excluding earth work) Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately. 300 mm |
| 5 | Item Code [R1 2023 1.1 + R1 2023 1.1.7]: Providing, lowering, laying in trenches, aligning, fixing in position and jointing Ductile Iron (DI) ISI marked K-7 grade S&S pipes as per IS:8329-2000 (amended up to date), with internal cement mortar lining suitable for potable water with rubber ring (EPDM) joints as per IS: 5382-1985 including all taxes (Central and local), transportation and freight charges, inspection charges, loading/ unloading charges, including cost of labour and material, specials (Tee, bend etc.) satisfactory hydraulic testing, disinfection, commissioning etc. complete as per technical specifications and direction of Engineer-in-charge. (excluding earth work) Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately. 350 mm |
| 6 | Item Code [R1 2023 1.15 + R1 2023 1.15.1]: Providing and fixing of flanged/ plain ended MS Specials made from MS sheet strips of relevant IS specification of approved thickness by welding, lowering, laying, aligning, fixing in position at all level/ depths in trenches complete including all taxes, material, labour, inside lining, outside coating, testing and commissioning along with pipe line as per technical specifications and direction of Engineer-in-charge. MS pipe specials up to 600mm dia (with minimum 5mm thickness sheet) |
| 7 | Item Code [R1 2023 1.27 + R1 2023 1.27.1]: Providing Household Tap Connection as per technical specification and approved drawing as per relevant IS code (amended up to date) from HDPE/uPVC/DI/AC/MS/GI pipe line up to consumer meter/premises by using PP mechanical Integrated saddle with inbuilt flow control valve made out of SS316 designed for 5 LPM discharge at 0.5 bar pressure , not exceeding the flow of 7 LPM at 2 bar and a compression elbow, moulded in single piece/ fusion welded (Complete job) including digging out suitable size of pits and trench for laying service line in all kinds of soil; depositing and refilling of pit & jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 100 meter ; providing & fixing of all fitting duly approved in accordance with specification for potable water including GM Full-way Valve (IS:778 Mark) or wheel valve and specials with 20 mm nominal dia MDPE pipe PE 80 PN 16 as per ISO 4427 / 20 mm nominal dia PPR-C (Three layered) pipe PN16 SDR 7.4 (IS:15801:2008) (ISI mark) and above ground level using PPR-C pipe with standard PPR fittings/ GI pipes in the premises for fixing a tap / meter box (excluding) ,including accessories with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges . The service line should be laid at least 45 cm below ground level.Note: Road cut and restoration is not part of this item and paid separately. For connection with 20 mm dia MDPE/PPR-C pipe length up to 05 mtr. |
| 8 | Item Code [R1 2023 1.3.1 + R1 2023 1.3.1.1]: All End Socketed Up to 300 mm Diameter |
| 9 | Item Code [R1 2023 1.3.1 + R1 2023 1.3.1.2]: All End Socketed Above 300mm and up to 600 mm diameter |
| 10 | Item Code [R1 2023 1.3.2 + R1 2023 1.3.2.1]: All End Flanged Up to 300 mm Diameter |
| 11 | Item Code [R1 2023 1.3.2 + R1 2023 1.3.2.2]: All End Flanged Above 300mm and up to 600 mm diameter |
| 12 | Item Code [R1 2023 1.4.1 + R1 2023 1.4.1.4]: HDPE PE-80 PN-6 110 mm dia |
| 13 | Item Code [R1 2023 1.5.1 + R1 2023 1.5.1.3]: HDPE PE-80 PN-6 160 mm dia |
| 14 | Item Code [R1 2023 1.5.1 + R1 2023 1.5.1.5]: HDPE PE-80 PN-6 200 mm dia |
| 15 | Item Code [R4 2023 4.1]:Item Type [PHED] :: Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in trenches of required width and gradient for laying and jointing of pipe line including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 Mtr. including taking out the excavated soil, and then returning the soil as required in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and disposal of surplus excavated soil as directed within a lead of 50 Mtr. including required all safety provisions etc.:All kinds of soil |
| 16 | Item Code [R4 2023 4.5]:Item Type [PHED] :: Dismantling of cement concrete pavement for pipe line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by CC cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. Measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work. |
| 17 | Item Code [R6 2023 6.1.1 + R6 2023 6.1.1.2]: Manually Operated CI Sluice valve of Class PN-1.0 100 mm HW |
| 18 | Item Code [R6 2023 6.1.1 + R6 2023 6.1.1.4]: Manually Operated CI Sluice valve of Class PN-1.0 150 mm HW |
| 19 | Item Code [R6 2023 6.1.1 + R6 2023 6.1.1.5]: Manually Operated CI Sluice valve of Class PN-1.0 200 mm HW |
| 20 | Item Code [R6 2023 6.1.1 + R6 2023 6.1.1.6]: Manually Operated CI Sluice valve of Class PN-1.0 250 mm HW |
| 21 | Item Code [R6 2023 6.1.1 + R6 2023 6.1.1.7]: Manually Operated CI Sluice valve of Class PN-1.0 300 mm HW |
| 22 | Item Code [R9 2023 9.1.1 + R9 2023 9.1.1.3]: For Class-AA loading Sluice valve chamber of size 1.26m x1.185m x1.88m for pipe size-from 200-to-300mm Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysNov 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender