Tender For Repairs To Roads And Road Furniture At Sonamarg (Incl Haws) Under Ge 970 Ews
Tender Value
7.69 Lakhs
Estimated cost
Bid Submission
17 Nov 2026
19 days left
EMD
15380
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repairs To Roads And Road Furniture At Sonamarg (Incl Haws) Under Ge 970 Ews
BOQ
| Sl. No. | Item Description |
| 1 | M&L repair to potholes, area not exceeding 1.0 Sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, paths etc. cutting around edges to at least 25mm in depth, making good by filling in screened and graded road metal, watering and well ramming and applying a tack coat with bituminous primer @ 5 Kg per 10 Sqm of paving bitumen of Grade VG-10, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 Kg per 10 Sqm using paving bitumen of grade VG-30, binded with 0.09 Cum of stone chippings 6.3mm size and again well rammed (including supply of premixed macadam, binder and chippings), depth of potholes exceeding 30mm, complete all as specified and as directed. |
| 2 | Preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bag or mechanical air compressor to remove loose dirt etc, complete all as specified and directed. |
| 3 | M&L applying evenly a priming/ tack coat with bituminous primer @ 05 KG/ 10 Sqm of paving bitumen of Grade VG-10, complete all as specified and directed. |
| 4 | M&L premixed bituminuous macadam using 4% binder content of paving bitumen of Grade VG-30 by weight of total mix (consolidated thickness 75mm or less), laying with mechanical paver and rolled and compacted to required camber and gradient using 10 to 12 tonne power roller, complete all as specified and directed. Notes :-(a) Premixed Bituminuous Macadam shall be laid using self propelled hydrostatic paver finisher and preparation of mix shall be using hot mix plant and transporting the mix in tipper.(b) The exact bitumen content required shall be determined follwing the Mix Design procedure contained in the Asphalt Institute Manual MS-2 (Sixth Edition) as referred in case 3.5.3 of IRC 111:2009. The adjustment in rate due to variation in quantity of bitumen if any shall be priced at the rate of Rs. 80.00 Per KG of bitumen. (c) Design mix shall be got done by the contractor at his own expenses from Govt approved/NABL laboratory as decided by GE.(d) Contractor shall quote his rate by considering binder content @ 4% of total mix by weight however in case of any variation on lower side in weight of binder contents as per actual mix design the same shall be adjusted @ Rs 80 per Kg of bitumen. |
| 5 | M&L bituminous premix asphaltic semi dense concrete (SDAC) 30mm thick (consolidated thickness) with 5.5% binder content of paving bitumen of grade VG-30 by weight of total mix, rolled and compacted to required camber and gradient using 10 to 12 tonne power roller and laying with mechanical paver, complete all as specified and directed. Notes :- (a) Bituminous premix semi dense asphaltic concrete shall be prepared in central computerised hot mix plant. (b) Design mix shall be got done by the contractor at his own expenses from Govt approved/NABL laboratory as decided by GE. (c) Contractor shall quote his rates by considereing binder contents @ 5.5% of total mix by weight, however in case of any variation in weight of binder contents on lower side as per actual mix design, the same shall be ajusted @ Rs. 80.00 Per Kg of bitumen. |
| 6 | M&L preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like not exceeding 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturer's instructions including traffic diversion arrangement complete all as specified and directed. |
| 7 | S&F in repairs cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector or model No DA 972.0 fixed with and including MS stud of suitable size as per manufacturer's instructions complete all as per specified and directed. |
| 8 | Notes :-An amount of Rs. 500.00 on account of Credit Schedule for Schedule 'A' Part-II shall be deducted from total quoted amount of BOQ to arrive at the contract sum. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysNov 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender