Tender For Bid No. Dm/Ms/Cpm-Mp/327: Manufacture, Supply, Installation, Testing And Commissioning Of Signage And Graphics For 01 (One) At Grade Station (Viz. Modipuram Depot Station) And 01 (One) Depot (Viz. Modipuram Depot) Of Delhi-Ghaziabad-Meerut
Tender Value
Ref. Documents
Estimated cost
Bid Submission
24 Nov 2026
23 days left
EMD
56367
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Meerut → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Bid No. Dm/Ms/Cpm-Mp/327: Manufacture, Supply, Installation, Testing And Commissioning Of Signage And Graphics For 01 (One) At Grade Station (Viz. Modipuram Depot Station) And 01 (One) Depot (Viz. Modipuram Depot) Of Delhi-Ghaziabad-Meerut Rrts Corridor
BOQ
| Sl. No. | Item Description |
| 1 | NATIONAL CAPITAL REGION TRANSPORT CORPORATION LTD. Bid No.DM/MS/CPM-MP/327: \\"Manufacture, Supply, Installation, Testing and Commissioning of Signage and Graphics for 01 (One) At grade Station (viz. Modipuram Depot Station) and 01 (One) Depot (viz. Modipuram Depot) of Delhi-Ghaziabad-Meerut RRTS Corridor Price Bid NATIONAL CAPITAL REGION TRANSPORT CORPORATION LTD Gatishakti Bhawan INA, New Delhi –110 023 Preamble Name of Work: Bid No. DM/MS/CPM-MP/327: \\"Manufacture, Supply, Installation, Testing and Commissioning of Signage and Graphics for 01 (One) At grade Station (viz. Modipuram Depot Station) and 01 (One) Depot (viz. Modipuram Depot) of Delhi-Ghaziabad-Meerut RRTS Corridor S.No Description GENERAL |
| 2 | The Financial Bid shall be read in Conjunction with the Bidding Document |
| 3 | There are 1 schedule in the Financial Bid as follows : (i) Schedule-A The bidder is required to quote a flat percentage \\"Excess\\" (+) / \\"Less\\" (-) / \\"At par\\" with respect to the Total amount of all the Schedules in the \\"BoQ1\\" Sheet and further discount if any may be Quoted in the \\"BOQ2\\" Sheet along with methodology of discount if any. The percentage quoted by the Bidder in \\"BoQ1\\" sheet and discount (if any) quoted by the Bidder in the \\"BoQ2\\" will be applied on the individual rate mentioned under Column \\"6\\" for Schedule-A , for the purpose of payment to the Contractor. |
| 4 | The quantities for various items provided in the Financial Bid are estimated quantities and are given to provide a common basis for Bidding. During the execution of works, the same may vary based upon \\"Good for Construction\\" (GFC) drawings issued by the Engineer and as per the site conditions. The basis of the payment will be the actual quantities of the work executed and accepted by the Engineer or quantities as per the GFC drawings whichever is less and shall be paid /valued as per the accepted rates. |
| 5 | The quoted rates for various items are for completed and finished items of work complete in all respects. It will be deemed to include all the cost involved in the execution of the items and shall include all the applicable taxes [except Goods and Service Tax (GST)] duties, royalties, cess overheads, profit etc. The Bidder shall be required to consider this aspect while quoting Excess (+) / Less (-) / At par for Total amount of Schedule \\"A\\" . It shall include all general risks, liabilities and obligations set out or implied in the Contract shall and including remedy of any defects during the Defect Liability Period, unless otherwise provided in the Contract. The whole cost of complying with the provisions of the Contract shall be deemed to have been included in the quoted rates. GST will be paid extra. |
| 6 | Bidder may please note that to perform this contract. nothing extra shall be payable on account of field constraints, non-availability of uninterrupted front, cost of project management, monitoring, coordination and supervision, cost of adhering to quality requirements (QA/QC), cost of adhering to SHE requirements, cost of preparing drawings and documents, as-built records and documentation, preparation of detailed scheme for taking necessary clearance and approval from the concerned authority and other local bodies etc. |
| 7 | Income Tax and any other statutory taxes to be deducted at source will be deducted by the Employer from the due payments of the contractor in accordance with the prevailing rules in force. |
| 8 | Bidder should not tamper the Price Bid. If the Price Bid is found to be modified by the bidder, then the same will be treated as incomplete and non-responsive and may result in the rejection of the Bid. |
| 9 | Method of Quoting the Price in the Pricing Document The Pricing Document is in Excel Format and Quoting of the Price in the Pricing Document should be as Follows: (i) Whole Excel Worksheet is Locked except the Cells which are highlighted in Blue. (ii) Bidders are required to fill these cells which are highlighted in Blue only. (iii) Bidder is required to quote a flat percentage Excess / Less / At Par in the \\"BOQ1'' Sheet Cell H16, N16 for Total Amount of Schedules.(iv) All 'blanks' in the Pricing Document, where the Bidder is permitted to quote shall be filled in.(v) If some % is quoted inspite of marking 'At par' that % will not be considered and it will be taken as \\"At par\\" on basic amount. Failure to quote the % excess or % less or 'at par' for the \\"total amount of Schedules\\" shall be treated as \\"At Par\\" irrespective of any Percentage (if indicated) and shall be evaluated accordingly. (vi) Bidder is required to quote Rates in INR only. However, The bidder requiring any payment in forgein currencies (in maximum three freely convertible forgein currencies) may stipulated the same in Schedule of payment as per sub clause 15.2 of ITB/BDS. |
| 10 | Errors will be corrected by the Employer for any arithmetic errors in computation or summation as per contract conditions. |
| 11 | For Calculation of rates (excluding GST) of DSR 2023 items, following Methodology issued by CPWD vide Office Memorendum (OM) dated 08.08.2024 have been adopted: As per CPWD OM the rates of individual items of DSR 2023 has been multiplied with correction factor on account of GST @ 0.973 to the existing rate of DSR 2023 item in order to achieve modified DSR rate and then reduced the corrected rate by 18% for making DSR item excluding GST.Note: (a) The above Methodology shall be applicable for calculating the rate of Individual Items of DSR 2023 in Schedule B items executed under Any other DSR items in Schedule B (to be executed under Lump Sum amount). Based on the above Methodology and the price quoted by the bidder, the payment shall be made for the individual items of DSR 2023 and for the items executed under Lump Sum amount of DSR 2023 in Schedule B. |
| 12 | The bidder may visit the Site to assess the condition of the girders (free issue material) and satisfy itself regarding the space available for its erection. The bidder shall be deemed to have understood and made sufficient allowance for available space for erection of girders at Site. Cost of all measures, methods, provisions required to execute work based on available space for erection of girders shall be included in quoted price. Package - CA-06 |
| 13 | Chembur |
| 14 | Kurla East |
| 15 | S G Barve Marg |
| 16 | EEH Total no of Stations Package - CA-07 |
| 17 | Diamond Garden |
| 18 | Shivaji Chowk |
| 19 | Mankhurd (On Hold) |
| 20 | Mandale (On Hold) Total no of Stations Total no. of Stations |
| 21 | SCHEDULE-A |
| 22 | Total Amount of Schedule. |
| 23 | Total Amount of Schedule Letter of Price Bid Bid No.: DM/MS/CPM-MP/327 To National Capital Region Transport Corportation Limited GatiShakti Bhawan,INA, New Delhi- 110023 We, the undersigned, declare that: (a) We have examined and have no reservations to the Bidding Documents, including Addenda issued in accordance with Instructions to Bidders (ITB) 8. (b) We offer to execute in conformity with the Bidding Documents and the Technical Bid submitted for the following Works: Name of Work: Bid No. DM/MS/CPM-MP/327: \\"Manufacture, Supply, Installation, Testing and Commissioning of Signage and Graphics for 01 (One) At grade Station (viz. Modipuram Depot Station) and 01 (One) Depot (viz. Modipuram Depot) of Delhi-Ghaziabad-Meerut RRTS Corridor (c) The total price of our Bid, excluding any discounts offered in item (d) below is: [amount in INR in figures] 0.0 DISCOUNT (IN %age ) Discount methodology (d) The discounts offered and the methodology for their application indicated in BoQ2 sheet are:- 0.0 0.0 Discount Amount 0.0 (e) The total price of our Bid, including discounts offered in item (d) above is: [Amount in INR in figures] 0.0 [Amount in INR in words] INR Zero Only (f) (g) If our Bid is accepted, we commit to obtain a performance security in accordance with the Bidding Documents. (h) We understand that this bid, together with your written acceptance thereof included in your notification of award, shall constitute a binding contract between us, until a formal contract is prepared and executed. (i) We understand that you are not bound to accept the lowest evaluated bid or any other bid that you may receive. Name of the authorized representative of the bidder Desiganation of the authorized representative Name of the Bidder/ Bidding Firm / Company : 0.0 Date: (DD/MM/YYYY) Name of Work: DM/MS/CPM-MP/327: \\"Manufacture, Supply, Installation, Testing and Commissioning of Signage and Graphics for 01 (One) At grade Station (viz. Modipuram Depot Station) and 01 (One) Depot (viz. Modipuram Depot) of Delhi-Ghaziabad-Meerut RRTS Corridor\\". SCHEDULE-A |
| 24 | 2.0 Item No. Item Description Unit Rate Quantity Amount Remarks |
| 25 | SUSPENDED DOUBLE SIDED ILLUMINATED SIGN Providing and fixing Suspended Double Sided illuminated signs including all operations from fabrication to installation all complete as per relevant drawings, technical specifications, signage schedule and to the satisfaction of the Engineer-in-Charge. A) Sign Frame:The sign frame is to be suspended from concrete e.g. slab or beam, trusses or purlins etc. by robust corrosion protected aluminum suspenders of required size and lengths including all accessories like bottom plate, locking plate, adjuster, bolts etc. cumplete as per drawings for following sizes. Entire assembly of suspension system is to be Polyester Pure powder cated. Hitti fasteners of specified diameters are to used where anchoring is to be done with the concrete members. The mounting surface shall be required or finished as per surrounding complete at no extra cost. Powder coating shall be done only after all fabrication including bolt holes, guide channels/holes etc. have been drilled/enc routed or cut into the members. All anchor fasteners, bolts etc to be SS304 grade. B) Sign Panel: Providing and fixing sign panel made out of spectrum 4mm thick Polycarbonate sheeting with vinyl message (3630 / 7725 series 3M or equivalent) & protectitive layer of clear vinyl to required size and shape. Vinyl colour to match graphics & text as per schedule and pasted on sign panel, protected with lamination film as required. For double-sided signage, where graphics / text are to be provided on both faces, the sign panels as described above are to be provided on each side of the sign frame. C) Reflector Panel:Item to include providing and fixing embossed Aluminium mirror reflector panel as per approved specifications and make, with provision to hold luminaries in position. For double-sided signs, item to also include providing and fixing of Reflector Panel with Embossed Radiant Mirror Reflector film to be pasted on both sides. D) Back Panel:For single-sided signs, where graphics / text is to be on one side, item to include providing an Embossed Radiant Mirror Reflector film to be pasted on polyester powder coated 2mm thick Aluminium back panel as per technical specifications. Above description generally holds good for the following signage unless otherwise specified except few modifications due to their respective finished dimensions and fixing arrangements or unless otherwise specified:- For Signage Graphics, Drawings and Specifications shall be referred |
| 26 | 900mm X 300mm X 55mm |
| 27 | 1200mm X 300mm X 55mm |
| 28 | 1500mm X 300mm X 55mm |
| 29 | 2100mm X 300mm X 55mm |
| 30 | 1800mm X 300mm X 55mm |
| 31 | SUSPENDED SINGLE SIDED ILLUMINATED SIGN Providing and fixing Suspended Single Sided illuminated signs including all operations from fabrication to installation all complete as per relevant drawings. technical specifications, signage schedule and to the satisfaction of the Engineer-in-Charge. The sign frame is to be suspended from concrete e.g. slab or beam, trusses or purlins etc. by robust corrosion protected aluminum suspenders of required size and lengths including all accessories like bottom plate, locking plate, adjuster, bolts etc. complete as per drawings for following sizes. Entire assembly of suspension system is to be Polyester Pure powder coated. Hilti fasteners of specified diameters are to used where anchoring is to be done with the concrete members. The mounting surface shall be required or finished as per surrounding complete at no extra cost. Powder coating shall be done only after all fabrication including bolt holes, guide channels/holes etc. have been drilled/cnc routed or cut into the members. All anchor fasteners, bolts etc to be SS304 grade. A) Sign Frame:The sign frame shall be made of Special Muminium profiles of alloy 6063-temper 15/74 with inbuil hinges and wiring raceways section of minimum 3mm thickness, fabricated to required sizes and shape as per technical specifications and drawings Item to indude providing and fixing of aluminium channel supports bolted to sign frame. Sign frame including channel supports are to be powder costed in colour duly approved by Engineer-in-Charge, Powder coating to be minimum of 80 micron with 10-year warranty. The structure shall be provided with EPDM gasket to seal the door shutter and prevent dust ingress, rain ingress and insects Le IP 54/IP 65 compatible (Internal Sigre shall be IP54 and External signs shall be IP65 certified as por approved graphics and fabrication drawings). All powder coating shall be done on all internal as well as external surfaces. The sign shall be intermally it with the specified Luminaire (LED Module) strip LED with driver and item to include providing and fixing luminaire and fixtures complete as per technical specifications. LEDs should be guaranteed for 5 years and all wires to be of FR LSZH grade. The frame shall be snap fit and easily openable for maintenance B) Sign PanelProviding and fixing sign panel made out of 4mm thick Polycarbonate sheeting with vinyl message (3630/7725 series 3M or equivalent) & protectitive layer of clear vinyl to required size and shape. Vinyl colour to match graphics & text as per schedule and pasted on sign panel, protected with lamination film as required. For double-sided signage, where graphics/test are to be provided on both faces, the sign panels as described above are to be provided on each side of the sign frame. C) Reflector Paneltem to include providing and fixing embossed Aluminium minor reflector panel as per approved specifications and make, with provision to hold luminaries in position. For double-sided signs, item to also include providing and fixing of Reflector Panel with Embossed Radiant Mirror Reflector film to be pasted on both sides. D) Back Panel.For single-sided signs, where graphics/text is to be on one side, tem to include providing an Embossed Radiant Mirror Reflector film to be pasted on polyester powder coated 2mm thick Aluminium back panel as per technical specifications Above description generally holds good for the following signage unless otherwise specified except few modifications due to their respective finished dimensions and fuing arrangements or unless otherwise specified: \\"For Signage Graphics, Drawings and Specifications shall be referred |
| 32 | 1500mm X 300mm X 55mm |
| 33 | 900mm X 300mm X 55mm |
| 34 | SPECIAL SIGNAGE WITH EACH SIDE OF 2100mm X 300mm X 55mm |
| 35 | FACE MOUNTED SINGLE SIDED ILLUMINATED SIGN Providing and fixing FACE MOUNTED SINGLE SIDED ILLUMINATED SIGN including all operations from fabrication to installation all complete as per relevant drawings. technical specifications, signage schedule and to the satisfaction of the Engineer-in-Charge. Illuminated Face Mounted Signs:The sign frame is to be mounted on Brick / RCC wall backing with/without cladding. Item to include aluminium sign frames of required size and shape Including mounting the sign frame on the RCC / Brick wall backing by drilling holes of required dia in the RCC/Brick wall and anchoring the sign frame using Hilti fasteners or equivalent of specified size and length and providing and fixing all item and accessories Including Silicon Sealant and Backer rod of approved make complete as per drawings for following panel sizes. The mounting surface shall be required or finished as per surrounding area complete at no extra cost. This signs be be necessarily single sided only. All anchor fasteners, bolts etc to be ss304 grade A) Sign Frame:The sign frame shall be made of Special Muminium profiles of alloy 6063-temper T5/T4 with inbuil hinges and wiring raceways section of minimum 3mm thickness, fabricated to required sizes and shape as per technical specifications and drawings Item to indude providing and fixing of aluminium channel supports bolted to sign frame. Sign frame including channel supports are to be powder costed in colour duly approved by Engineer-in-Charge, Powder coating to be minimum of 80 micron with 10-year warranty. The structure shall be provided with EPDM gasket to seal the door shutter and prevent dust ingress, rain ingress and insects Le IP 54/IP 65 compatible (Internal Sigre shall be IP54 and External signs shall be IP65 certified as por approved graphics and fabrication drawings). All powder coating shall be done on all internal as well as external surfaces. The sign shall be intermally it with the specified Luminaire (LED Module) strip LED with driver and item to include providing and fixing luminaire and fixtures complete as per technical specifications. LEDs should be guaranteed for 5 years and all wires to be of FR LSZH grade. The frame shall be snap fit and easily openable for maintenance B) Sign PanelProviding and fixing sign panel made out of 4mm thick Polycarbonate sheeting with vinyl message (3630/7725 series 3M or equivalent) & protectitive layer of clear vinyl to required size and shape. Vinyl colour to match graphics & text as per schedule and pasted on sign panel, protected with lamination film as required. For double-sided signage, where graphics/test are to be provided on both faces, the sign panels as described above are to be provided on each side of the sign frame. C) Reflector Paneltem to include providing and fixing embossed Aluminium minor reflector panel as per approved specifications and make, with provision to hold luminaries in position. For double-sided signs, item to also include providing and fixing of Reflector Panel with Embossed Radiant Mirror Reflector film to be pasted on both sides D) Back Panel.For single-sided signs, where graphics/text is to be on one side, tem to include providing an Embossed Radiant Mirror Reflector film to be pasted on polyester powder coated 2mm thick Aluminium back panel as per technical specifications Above description generally holds good for the following signage unless otherwise specified except few modifications due to their respective finished dimensions and fuing arrangements or unless otherwise specified: \\"For Signage Graphics, Drawings and Specifications shall be referred |
| 36 | 1200X300X55 |
| 37 | 1500X300X55 |
| 38 | SUSPENDED SINGLE SIDED NON ILLUMINATED SIGN: Providing and fixing Suspended Single Sided Non-Illuminated Sign with vinyl text including all operations from fabrication to installation all complete as per relevant drawings, technical specifications, signage schedule and to the satisfaction of the Engineer-in-charge. The sign frame is to be suspended from concrete e.g. slab or beam, trusses or purlins etc. by robust corrosion protected aluminum suspenders of required size and lengths including all accessories like bottom plate, locking plate, adjuster, bolts etc. complete as per drawings for following sizes. Entire assembly of suspension system is to be Pure Polyester powder coated. Hilti fasteners or equivalent of specified diameters are to used where anchoring is to be done with the concrete members. The mounting surface shall be required or finished as per surrounding are complete at no extra cost. Suspenders shall be Powder coated aluminum suspenders. Powder coating shall be done only after all fabrication including bolt holes, guide channels/holes etc, have been drilled/cnc routed or cut into the members. All anchor fasteners, bolts etc to be SS304 grade. All Complete as per specifications and drawings A) Sign Frame:The sign frame shall be made of Special Muminium profiles of alloy 6063-temper T5/T4 with inbuil hinges and wiring raceways section of minimum 3mm thickness, fabricated to required sizes and shape as per technical specifications and drawings Item to indude providing and fixing of aluminium channel supports bolted to sign frame. Sign frame including channel supports are to be powder costed in colour duly approved by Engineer-in-Charge, Powder coating to be minimum of 80 micron with 10-year warranty. The structure shall be provided with EPDM gasket to seal the door shutter and prevent dust ingress, rain ingress and insects Le IP 54/IP 65 compatible (Internal Sigre shall be IP54 and External signs shall be IP65 certified as por approved graphics and fabrication drawings). All powder coating shall be done on all internal as well as external surfaces. The sign shall be intermally it with the specified Luminaire (LED Module) strip LED with driver and item to include providing and fixing luminaire and fixtures complete as per technical specifications. LEDs should be guaranteed for 5 years and all wires to be of FR LSZH grade. The frame shall be snap fit and easily openable for maintenance B) Sign Panel:Providing and fixing sign panel of Aluminium extrusion with minimum thickness of 2mm panels fabricated required size and shape as per fabrication drawings and are to be powder coated on both sides to match as per approved colour or any other colour duly approved by engineer incharge with vinyl message (3630/7725 series 3M or equivalent) & protectitive layer of clear vinyl to required size and shape. Vinyl colour to match graphics & text as per schedule and pasted on sign panel (front panel) covered with 3mm polycarbonate sheet. For double-sided signage, where graphics / text are to be provided on both faces, the sign panels as described above are to be provided on each side of the sign frame C) Back Panel:Back panel and front panel item should be same with 2mm thik aluminium extrusion/profile.Single-sided signs, where graphics / sign text is to be on one side, are to be provided with 2mm thik aluminium back panels fabricated to required size and shape as per fabrication drawings and are to be powder-coated on both sides to match as per approved colour or any other colour duly approved by the Engineer-in-Charge. D) Accessories:Providing and fixing all accessories such as sping clips pivot binges, an hooks, nuts, cleats, screws hooks and slots/latc, complete as per specified fabrication drawing. All arıchor fasteners, bolts etc to be SS304 Above description generally holds good for the following signage unless otherwise specified except few modifications due to their respective finished dimensions and fuing arrangements or unless otherwise specified: \\"For Signage Graphics, Drawings and Specifications shall be referred |
| 39 | 1200X300X40 |
| 40 | SUSPENDED DOUBLE SIDED NON ILLUMINATED SIGN Providing and fixing Suspended Double Sided Non-illuminated sign with vinyl text including all operations from fabrication to installation all complete as per relevant drawings, technical specifications, signage schedule and to the satisfaction of the Engineer-in-charge. The sign frame is to be suspended from concrete e.g. slab or beam, trusses or purlina etc. by robust corrosion protected aluminum suspenders of required size and lengths Including all accessories like bottom plate, locking plate, adjuster, bolts etc. complete as per drawings for following sizes. Entire assembly of suspension system is to bo Pura Polyester powder coaled. Hilli fasteners or equivalent of specified diameters are to used where anchoring is to be done with the concrete members. The mounting surface shall be required or finished as per surrounding are complete at no extra cost. Suspenders shall be Powder coaled aluminum suspenders, Powder coating shall be done only after all fabrication including bolt holes, guide channels/holes etc. have been drilled/anc rouled or cut into the members. All anchor fasteners, bolis etc to be SS304 prade. All Complete as per specifications and drawings A) Sign Frame:The sign frame shall be made of Special Aluminium profiles of alloy 6063-temper T5/T4 with inbuit hinges and wiring raceways section of minimum 3mm thickness. fabricated to required sizes and shape as per technical specifications and drawings. Sign frame including channel supports are to be powder coated in colour duly approved by Engineer-in-Charge. All powder coating shall be done on all internal as well as extemal surfaces. Powder coating to be minimum of 80 micron with 10-year warranty. The structure shall be provided with EPDM gasket to seal the door shutter and prevent dust ingress, rain ingress and Insects 1.0. IP 54/IP 65 compatible (Intermal Signs shall be IP54 and Extemal signs shall be IP65 certified as per approved graphice and fabrication drawings). The frame shall be snap fit and easily openable for maintenance. B) Sign PanelProviding and fixing sign panel of Aluminium extrusion with minimum thickness of 2mm panels fabricated required size and shape as per fabrication drawings and are to be powder coated on both sides to match as per approved colour or any other colour duly approved by engineer incharge with vinyl message (3630/7725 series 3M or equivalent) & protectitive layer of clear vinyl to required size and shape. Vinyl colour to match graphics & text as per schedule and pasted on sign panel (frunt panel) covered with 3mm polycarbonate sheet. For double-sided signage, where graphics/text are to be provided on both faces, the sign panels as described above are to be provided on each side of the sign frame. C) Back Panel:Back panel and front panel item should be same with 2mm thik alumintum extrusion/profile.Single-sided signs, where graphics/sign text is to be on one side, are to be provided with 2mm thik aluminium back panels fabricated to required size and shape as per fabrication drawings and are to be powder-coated on both sides to match as per approved colour or any other colour duly approved by the Engineer-in-Charge. D) Accessories:Providing and fixing all accessories such as spring clips, pivot hinges, anchoring hooks, nuts, cleats, screws hooks and slots etc. complete as per specified fabrication drawing. All anchor fasteners, bolts etc to be SS304 grade. Above description generally holds good for the following signage except few modifications due to their respective finished dimensions and foing arrangements:- \\"For Signage Graphics, Drawings and Specifications shall be referred |
| 41 | 900X300X40 |
| 42 | 600X300X40 |
| 43 | FACE MOUNTED SINGLE SIDED NOR lLUMINATE SIGN Providing and fixing Face Mounted Single Sided Non-Illuminated Sign with vinyl text including all operations from fabrication to installation all complate as per relevant drawings, technical specificatioris, signage schedule and to the satisfaction of the Engineer-in-charge, Face Mounted Non-Illuminated signProviding and foung face mounted single sided Non illuminated signage made of an extruded profile section of minimum 3mm thickness with powder coating, powder coated 2mm thick aluminium panel fabricated to required size and shape as per fabrication drawings with vinyl message (3630/7725 series 3m or equivalent), to required size and shape. Vinyl colour to match graphics and text as pe schedule and pasted on sign panel. The Signage shall be fixed using aluminium profile and MS brackets. The Signage shall have an easy mechanism of removing the content/information for inspection and access of the services, A) Sign Frame:The sign frame shall be made of Special Aluminium profiles of alloy 6063-temper T5/T4 with inbuit hinges and wiring raceways section of minimum 3mm thickness, fabricated to required sizes and shape as per technical specifications and drawings. Sign frame including channel supports are to be powder coated in colour duly approved by Engineer-in-Charge, All powder coating shall be done on all intemal as well as external surfaces. Powder coating to be minimum of 80 micron with 10-year warranty, The structure shall be provided with EPDM gasket to seal the door shutter. and prevent dust ingress, rain ingress and insects ie, IP 54/IP 65 compatible (Internal Signs shall be IP54 and Extermal signs shall be IP65 certified as per approved graphics and fabrication drawings). The frame shall be snap fit and easily openable for maintenance, B) Sign Panel:Providing and fixing sign panel of Aluminium extrusion with minimum thickness of 2mm panels fabricated required size and shape as perfabrication drawings and are to be powder coated on both sides to match as per approved colour or any other colour duly approved by engineer Incharge with vinyl message (3030/7725 series 3M or equivalent) & protectitive layer of clear vinyl to required size and shape. Vinyl colour to match graphics & text as per schedule and pasted on sign panel (front panet) covered with 3mm polycarbonate sheet. For double-sided signage, where graphics/textare to be provided on both feces, the sign panels as described above are to be provided on each side of the sign freme. C) Back Panel:Back panel and front panel item should be same with 2mm thik aluminium extrusion/profile Single-sided signs, where graphica/sign text is to be on one side, are to be provided with 2mm thik aluminium back panels fabricated to required size and shape as per fabrication drawings and are to be powder-coated on both sides to match as per approved colour or any other colour duly approved by the Engineer-in-Charge D Accessories:Providing and fixing all accessories such as spring clips, pivot hinges, anchoring hooks, nuts, cleats, screws hooks and slots elc, complete as per specified fabrication drawing. All anchor fasteners, bolts eto to be 55304 grade. Above description generally holds good for the following signage except few modifications due to their respective finished dimensions and fixing arrangements: For Signage Graphica, Drawings and Specifications shall be referred |
| 44 | 400X200X40 |
| 45 | 900X300X40 |
| 46 | 900X600X40 |
| 47 | 1200X300X40 |
| 48 | 1200X1800X40 |
| 49 | 1500X300X40 |
| 50 | 300X300X40 |
| 51 | CHANNEL LETTER SIGNS Providing and fixing 3mm thick Aluminium sheet channel letter signs for station name with logo, duly powder coated for exterior grade finish, backlit with LEDs and face covered with diffuser polycarbonate pasted with 3M vinyl as per graphic colour selection, design complete with fixing in place with heavy duty anchor system. Illuminated Channels letters to be profiled and to have aluminium PVG-profile all around the edges. (In English, upper and lower case letters shall be treated a par. Space whereever is coming in between two words a station name shall not be considered extra) In Hindi letters Matras with vertical legs like shall be considered as a separate letter each half or full shall be considered as single letter only. Heading of letters and Matras shall not be considered extra) Spaces whereever coming in between two words of a station name shall not be considered extra. The sign shall comprises of 3D Built up RRTS logo of appropriate size and channel letters in required fonts of Hindi and English in Font Height as shown in drawings and supported on a rigid supporting system and the logo shall have hallow lit effect by LED's with high performance branded LED (GE/OSRAM/PHILIPS) modules with concealed driver unit to attain a minimum lux level of 45 candelas. Wiring arrangement to be concealed type. Illumination information as per signage schedule. Letter Height Shall be 450mm to 700mm. |
| 52 | Station Channel Letter Sign (for each channel letter) |
| 53 | STATION TOTEM SIGN Providing, fixing, testing and comissioning Floor Mounted Illuminated Totem Sign including all operations from fabrication to installation, RCC Foundation all complete as per relevant drawings, technical specifications, signage schedule and to the satisfaction of the Engineer-in-charge. The Floor mounted Totem Signage shall have Intemal structure and a concrete foundation designed to withstand the imposed loads. Note: The rates quoted shall be Inclusive of Design, Supply and casting of RCC foundation for Totem Signage which Includes excavation, backfilling in foundation, PCC, RCC, formwork, Waterproofing ala with complete finishings as per approved drawings and specifications |
| 54 | 2000X7000X300 TO 450 TOTEM SIGNAGE AT ENTRY EXIT |
| 55 | VINYL SIGN Providing and installing signage complete as per graphics in schedule including providing and fixing pictogram Letters to be made with plotter cul self adhesive cast vinyl color to match graphics/texts with prolectitive layer of clear vinyl as mentioned in signage schedule, Frosted film of 3M or equivalent to be pasted on the rear side of the glass |
| 56 | 1200X300 |
| 57 | 300X300 |
| 58 | 300X600 |
| 59 | 1050X300 |
| 60 | FACE PLATE SIGNS (SS Plate/ Al. Plate) |
| 61 | Non-Illuminated Room Name Sign (In SS Plate) Providing And fixing plated type Graphics sign made out of 2mm thick SS 304 grade stainless steel, fabricated to required sizes and shapes, including comers and edges properly rounded and dressed. Item to Includo chemical etching of designated graphics/text in required color or the face side and foxing to RCC/Wall surface/doom as required with the stainless steel counter sunk cross headed screws of required length and dia. Including providing necessary washers, PVC/Rubber spacers etc. Al anchor fasteners, bolts etc to be SS304 grade complete in all respects as per specifications and drawings... 10.1.1 400X200 NO 1338.4 60.0 80303.99 Same rate has been considered as of item No. 11.1.1 of Pkg M-6, placed at CP-12 |
| 62 | Non-Illuminated Statutory Signs (In Aluminium Plate) Providing and fixing plated type graphic laminated signs made out of 2mm thick Aluminium sheet, fabricated to required size and shape including comers and edges property rounde and dressed. Punching necessary holes of required dia, pure Polyester powder coating c both sides and all edges in required color, screen printing of designated graphic text in required color on the face side (screen printing to be done as per specificatios and in accordance with the sign schedule and directions of Engineer-In-charge) and protected v Jacquer coating and protoctitive layer of clear vinyl including fixing to RCC/Brick wall back by drilling holes of required dia, in the required length angalia nitidaling groviding necess washers, PVC/Rubber spacers etc. Complete as per Signaties saghadole and directions the Engineer-in-charge which shall be final, conclusive Bliding: asteners bolts etc to be SS304 grade. 10.2.1 150X300 NO 511.91 40.0 20476.4 Same rate of NS-3.1 has been considered as in Pkg M-6, placed at CP-30 10.2.2 300X300 NO 1175.89 84.0 98774.6 Same rate has been considered as of item No. 11.2.1 of Pkg M-6, placed at CP-12 10.2.3 900X300 NO 2935.66 8.0 23485.26 Same rate has been considered as of item No. 11.2.7 of Pkg M-6, placed at CP-11 10.2.4 900X450 NO 4405.23 8.0 35241.82 Same rate has been considered as of item No. 11.2.8 of Pkg M-6, placed at CP-11 |
| 63 | SELF ILLUMINATING SIGNS (Fire Identification Sign) |
| 64 | Providing and fixing plate type graphics sign complete as per technical specifications and signage schedule, screen printed (Latex Printing) on photolurninescent U-100 Aluminium sheet of 1.0mm (10% containing Lumigen-Ill as base chemical covered under ultra-violet stabilized conting (Glo-lite or equivalent make) of required sizes and rounded and dressed. Item to include shapes, including comers and edges property rounde fixing to RCC/Wall Surface/Wooden doors as required with the stainless steel counter sunk cross-headed screws of required length and diameter including providing necessary washers, PVC/Rubber spacers etc. Item to include providing and fuxing of signages le foing on wall/celling/panel/complete in all respects and as directed by Engineer-In-charge. 11.1.1 Face Mounted Single sided 11.1.1.1 600X300 NO 1734.23 40.0 69369.27 Same rate has been considered as of item No. 12.1.1.1 of Pkg M-6, placed at CP-11 11.1.1.2 300X150 NO 432.98 10.0 4329.78 Same rate has been considered as of item No. 12.1.1.2 of Pkg M-6, placed at CP-11 |
| 65 | RETRO REFLECTIVE |
| 66 | External Retro Reflective Signage Providing and fixing Post mounted lamianted over text Sign including all operations from fabrication to installation and accessories complete as per relevant drawings, technical specifications and signage schedule and to the satisfaction of Engineer-in-Charge. Providing and fixing sign frame, to be made out from mild steel T-sections (no joints shall be permitted in individual peripheral member) of required sizes, finished in Polyurethane paint to match as per approved colour, Providing & fixing Aluminum sign panel fabricated to required size and shape. Providing Plotter cut retro reflective vinyl sheet on sign panel with required graphic sign/text in approved color as per drawings and signage schedule Item to include providing and fixing mild steel angle sign frame fabricated to required size and shape finished in Polyurethane paint to match as per approved colour, Including providing and fixing Mild steel section posts made of SHS sections of required sizes and bolted sign frame to the post. Item to include providing, laying of M20 grade concrete in foundation block and anchoring required length of post into foundation block using base fastener made of mild steel angle section. Minimum 1800mm clearance required from road level to soffit of signages 12.1.1 DOUBLE SIDED SINGLE POST 12.1.1.1 300X600 NO 5509.15 9.0 49582.32 Same rate has been considered as of item No. 13.1.1.2 of Pkg M-6, placed at CP-11 12.1.1.2 900X300 NO 8263.72 2.0 16527.44 Same rate has been considered as of item No. 13.1.1.5 of Pkg M-6, placed at CP-11 12.1.2 SINGLE SIDED SINGLE POST 12.1.2.1 300X600 NO 4054.67 8.0 32437.33 Same rate has been considered as of item No. 13.1.2.1 of Pkg M-6, placed at CP-11 12.1.3 SINGLE SIDED SINGLE POST 12.1.3.1 1200X300 NO 10704.88 4.0 42819.51 Same rate has been considered as of item No. 13.1.3.1 of Pkg M-6, placed at CP-11 12.1.4 DOUBLE SIDED DOUBLE POST 1121.4.1 1200X300 NO 7695.32 4.0 30781.28 Same rate of NS-4.1.2 has been considered as in Pkg M-6, placed at CP-10 |
| 67 | WALL MOUNTED RETRO REFLECTIVE SIGNAGE Providing and fixing plated type Graphics sign made out of 2mm thick Aluminium sheet, fabricated tu required sizes and shapes, including comers and edges properly rounded and dressed, Herm to include retro refective graphics/text in required color on the face side and fixing to RCC/Wall surface/ doors as required with the stainiess steel counter wunk cross headed screws of required length and dia, including providing necessary washers, PVC/Rubber spacers etc. All anchor fasteners, bulls etz to be 55304 grade complete in all respects as per specifications and drawings. 12.2.1 300X300 NO 431.82 7.0 3022.72 Same rate has been considered as of item No. 13.2.1 of Pkg M-6, placed at CP-10 12.2.2 600X300 NO 969.27 110.0 106619.28 Same rate has been considered as of item No. 13.2.4 of Pkg M-6, placed at CP-10 12.2.3 1800X450 NO 3787.46 16.0 60599.36 Same rate of NS-5.8 has been considered as in Pkg M-6, placed at CP-29 12.2.4 2100X450 NO 4418.71 8.0 35349.68 Same rate of NS-5.2 has been considered as in Pkg M-6, placed at CP-29 |
| 68 | Additional support steel structure for bridging atc. |
| 69 | Providing and fliding stainless steel (Grade 304) post made of Hollow tubes, plates eto Including welding, grinding, buming, polishing and fiffing the same with necessary stainless steel muts and bolts completa with necessary accessories & stairvest steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor with suitable arrangment as per approval of Engineer-in-charge. |
| 70 | Structural steel work in single section, fixed with or without connection plate, including cutting, hoisting, fixing in position and applying a priming coal of approved steel primer all complete, |
| 71 | Floor Graphics Supplying, cutling as per design and drawing and Installing in place floor sign and graphic materials like Vinyl filmes, PVC over laminate Rima, as par design and specifications and at specified location as per the direction of Engineer-in-charge. The floor graphics made out of 34 Envision 480CV3 as base cast Vinyl Sheet duly printed on Gold standard (Ultra Chrome GS3) ink for out door application printed inks should maintain overall graphics and it should be certified by OEM printing machine and further one layer fully covered with 3M luster transparent over-barrinale 3645 as n protector liner and all edges of the graphics shall be sealed by using a 3M edge sealer and plaster. |
| 72 | Floor Graphics Signs |
| 73 | POST MOUNTED SINGLE SIDED NON ILLUMINATED SIGN Providing and fixing Post Mounted Single Sided Non-illuminated Signs with vinyl text including all operations from fabrication to Installation all complete as per relevant drawings, technical specifications, signage schedule and to the satisfaction of the Engineer-in-charge. The Sign Shall be of Sleek Single Sided Pust Mounted non illuminated with 3mm thick Aluminium sign pannel fabricated to required sizes and shapes and screen printed/vinyl pasted graphics as per design. Mounted on powder coated/PU painted MS post upto 3.6m height with pure polyster powder coated, Which shall be a box section of minimum size of 75 x 50 x 6mm with clear gap of 1.5m to 2m between signage and floer level complete in all respects as per specifications and drawings. A) Sign Frame:The sign frame shall be made of Special Aluminium proflies of alloy 6063-temper TS/T4 with inbuil hinges and wiring raceways section of minimum 3mm thickness fabricated to required sizes and shape as per technical specifications and drawings. Sign frame including channel supports are to be powder coated in colour duly approved by Engineer-in-Charge. Al powder coating shall be done on all internal as well as extemal surfaces. Powder coating to be minimum of 80 micron with 10-year warranty. The structure shall be provided with EPDM gasket-te-seal the door shutter and prevent dust ingress, rain ingress and insects tipa compatible (Intermal Signa shall be IP54 and Extamal signal per approved graphics and fabrication drawings) te frame alhall albia and easily openable for maintenance. B) Sign Panel:Providing and fixing sign panel of Aluminium extrusion with minimum thickness of 3mm panels fabricated required size and shape as per fabrication drawings and are to be powder coated on both sides to match as per approved colour of any other colour duly approved by englheer Incharge with vinyl message (3630/7725 series 3M or equivalent) & protectitive layer of clear vinyl to required size and shape, Vinyl colour to match graphics & text as per schedule and pasted on sign panel (front panel) covered with 3mm polycarbonate sheet. For double-sided signage, where graphics (text are to be provided on both faces, the sign panels as described above are to be provided om each side of the sign frame. C) Back Panel:Back panel and front panel item should be same with 2mm thik alumiksum extrusion/profile Single-sided signs, where graphics/sign text is to be ort one side, are to be provided with 2mm thik aluminium back panels fabricated to required size and shepe as per fabrication drawings and are to be powder-coated on both sides to roved colour or any other colour duty approved by the Erigineer-in-match as per approved Charge. D) Accessories:Providing and foxing elt accessories such as spring clips, pivot hinges, anchonng hooks, nuts, cleate, screws hooks and slots etc. complete as per specified fabrication drawing. All anchor fasteners, bolts etc to be SS 304 grade. Above description generally holds good for the following signage except few modifications due to their respective finished dimensions and fixing arrangements: \\"For Signage Graphics, Drawings and Specifications shall be referred |
| 74 | WITH SINGLE POST 16.1.1 900X600X50 NO 8775.63 2.0 17551.26 Same rate has been considered as of item No. 16.2.6 of Pkg M-6, placed at CP-9 |
| 75 | WITH DOUBLE POST 16.2.1 1200X1800X50 NO 9835.44 4.0 39341.76 Same rate has been considered as of item No. 16.2.2 of Pkg M-6, placed at CP-9 16.2.2 3600X600X50 NO 102493.8 2.0 204987.6 Same rate has been considered as of item No. 16.2.6 of Pkg M-6, placed at CP-9 |
| 76 | STATION NAME SIGN Providing and fixing Non Illuminated Post Mounted Single sided signage including all operation from fabrication to installation all complete as per relevant drawings, technical specification, signage schedule to the satisfaction of Engineer. The sign pannel shall be 3mm thick Aluminium panel fabricated to required sizes and shapes and screen printed/ vinyl pasted graphics with protectitive layer of clear vinyl as per: design. Item to include chemical etching of designated graphics/text in required color on the face side. The sign shall comprises of letters in required fonts of Hindi and English in specified Font Height describing the station name as per drawings. Providing necessary supporting system comprising of MS members of required size and lengths as per drawings. All Complete as per technical specifications and drawings. \\"For Signage Graphics, Drawings and Specifications shall be referred |
| 77 | 1200X300 |
| 78 | Post Mounted Single Sided Illuminated signs Providing and fixing Post Mounted Single Sided Illuminated signs including all operations from fabrication to installation all complete as per relevant drawings, technical specifications, signage schedule and to the satisfaction of the Engineer-in-Charge. The Sign Shall be of Sleek Single Sided Post Mounted non lluminated with 3mm thick Aluminium sign pannel fabricated to required sizes and shapes and screen printed/vinyl pasted graphics as per design. Mounted on powder coated/PU painted MS post upto 3.6m height with pure polyster powder coated. Which shall be a box section of minimum size of 75 x 50 x 6mm with clear gap of 1.5m to 2m between signage and floor level complete in all respects as per specifications and drawings A) Sign Frame:The sign frame shall be made of Special Aluminium proflies of alloy 6063-temper TS/T4 with inbuil hinges and wiring raceways section of minimum 3mm thickness fabricated to required sizes and shape as per technical specifications and drawings. Sign frame including channel supports are to be powder coated in colour duly approved by Engineer-in-Charge. Al powder coating shall be done on all internal as well as extemal surfaces. Powder coating to be minimum of 80 micron with 10-year warranty. The structure shall be provided with EPDM gasket-te-seal the door shutter and prevent dust ingress, rain ingress and insects tipa compatible (Intermal Signa shall be IP54 and Extamal signal per approved graphics and fabrication drawings) te frame alhall albia and easily openable for maintenance. B) Sign Panel:Providing and fixing sign panel of Aluminium extrusion with minimum thickness of 3mm panels fabricated required size and shape as per fabrication drawings and are to be powder coated on both sides to match as per approved colour of any other colour duly approved by englheer Incharge with vinyl message (3630/7725 series 3M or equivalent) & protectitive layer of clear vinyl to required size and shape, Vinyl colour to match graphics & text as per schedule and pasted on sign panel (front panel) covered with 3mm polycarbonate sheet. For double-sided signage, where graphics (text are to be provided on both faces, the sign panels as described above are to be provided om each side of the sign frame. C) Back Panel:Back panel and front panel lem should be same with 2mm thik aluminium extrusion/profile. Single-sided signs, where graphics/sign text is to be on one side, are to be provided with 2mm thik aluminium back panels fabricated to required size and shape as per fabrication drawings and are to be powder-coated on both sides to match as per approved colour or any other colour duly approved by the Engineer-in-Charge. D) Accessories:Providing and fluding all accessories such as spring clips, pivot hinges, anchoring hooks, nuts, cleats, screws hooks and slots etc, complete as per specified fabrication drawing. All anchor fasteners, bolts etc to be SS304 grade. Above description generally holds good for the following signage except few modifications due to their respective finished dimensions and fixing arrangements \\"For Signage Graphics, Drawings and Specifications shall be referred |
| 79 | 1200X300 |
| 80 | Channel Letter Signage - 8500mm x 2000mm - MODIPURAM DEPOT |
| 81 | Providing and Fixing Channel Letter of required dimension made up of 3mm thick Acrylic sheet at Station ends in accordance with GFC drawing, having minimum Letter Height 300mm to 700mm having 70mm Aluminium Channelium Profile -C1 with collar fixed on rigid supporting arrangement of MS frame having min. dimension of 50mm X 50mm X 3mm thick with intermediate support and provision of J-clamp and MS clamp fixed on Brick wall/ RCC structure or any other surface using M10mm dia mechanical fastener of having min. 100mm length of Hilti/Fischer or any equivalent make with having primer coat over it. On frame 3mm ACP sheet with 8mm WPC board used as suporting arangement for fixing of channael letters on which LED module of 6500k with adapter of 300w power supplyfixed on it. The sign shall comprises of 3D Built up RRTS logo of appropriate size and channel letters in required fonts of Hindi and English in Font Height as shown in drawings and supported on a rigid supporting system and the logo shall have hallow lit effect by LED's with high performance branded LED (GE/OSRAM/PHILIPS) or equivalent make modules with concealed driver unit to attain a minimum lux level of 45 candelas. Wiring arrangement to be concealed type. Illumination information as per signage schedule. Above said item is complete in all respect and includes labour, tools and machineries for all heights used for fixing of signage.Nothing extra will be paid.as per direction of Engineer-in-charge 19.1.1 Providing & fixing Channel Letter - 8500mm x 2000mm - MODIPURAM DEPOT NO 207352.81 1.0 207352.81 Same rate of NS-7.1 has been considered as in Pkg M-6, placed at CP-28 |
| 82 | Sub Total |
| 83 | For contingencies / items which is not covered in BOQ and covered in DSR 2023 @5% of Subtotal at item 20 Total Amount in ₹ (Excl. GST) 2818361.0 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 23 daysNov 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender