Tender For maintenance of Completed Scheme Under N/A-Ii Horticulture Zonesub-Head : Repair And Maintenance Of Existing Water Pipelines In Various Parks Of Dda Under The Jurisdiction Of Sub Division-Iv/ Hcd-5 (As & When Required).
Tender Value
9.93 Lakhs
Estimated cost
Bid Submission
03 Nov 2026
5 days left
EMD
19863
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for maintenance of Completed Scheme Under N/A-Ii Horticulture Zonesub-Head : Repair And Maintenance Of Existing Water Pipelines In Various Parks Of Dda Under The Jurisdiction Of Sub Division-Iv/ Hcd-5 (As & When Required).
BOQ
| Sl. No. | Item Description |
| 1 | Deploying fitter and beldar for day to day repair & maintenance of existing G.I. / CPVC / HDPE pipelines including all necessaries T&P in various Parks of DDA complete as per direction of Engineer-in charge |
| 2 | (a) one Fitter (Grade 1) |
| 3 | (b) one Beldar |
| 4 | (c) one Coolie |
| 5 | Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality : |
| 6 | (a) 20 mm diameter pipe |
| 7 | (b) 40 mm diameter pipe |
| 8 | (c) 50 mm diameter pipe |
| 9 | Supplying G.I. pipes of Jindal (Hisar), TATA or its equivalent at site as approved by Engineer-in-charge. |
| 10 | (a) 20 mm diameter pipe |
| 11 | (b) 40 mm diameter pipe |
| 12 | (c) 50 mm diameter pipe |
| 13 | Supplying gun metal gate valve with C.I. wheel of approved quality (screwed end) at site as approved by Engineer-in-charge.(a) 20 mm nominal bore |
| 14 | Supplying G.I. Tee and G.I back (jam) nuts of make Jindal (Hisar), TATA or its equivalent at site as approved by Engineer-in-charge. |
| 15 | (a) 20 to 40 mm nominal bore |
| 16 | (b) 50 to 80 mm nominal bore |
| 17 | Providing G.I. union in existing G.I. pipeline of make TATA, Jindal (Hisar) or its equivalent at site as approved by Engineer-in-charge. |
| 18 | (a) 20 mm nominal bore |
| 19 | (b) 40 mm nominal bore |
| 20 | (c) 50 mm nominal bore |
| 21 | (d) 80 mm nominal bore |
| 22 | Providing G.I. elbow in existing G.I. pipeline of make UNIK, TATA, Jindal (Hisar) or its equivalent at site as approved by Engineer-in-charge. |
| 23 | (a) 20 mm nominal bore |
| 24 | (b) 40 mm nominal bore |
| 25 | (c) 50 mm nominal bore |
| 26 | (d) 80 mm nominal bore |
| 27 | Providing G.I. socket in existing G.I. pipeline of make UNIK, TATA, Jindal (Hisar) or its equivalent at site as approved by Engineer-in-charge. |
| 28 | (a) 20 mm nominal bore |
| 29 | (b) 40 mm nominal bore |
| 30 | (c) 50 mm nominal bore |
| 31 | (d) 80 mm nominal bore |
| 32 | Providing G.I. plug of make UNIK, TATA, Jindal (Hisar) or its equivalent at site as approved by Engineer-in-charge.(a) 20 mm nominal bore |
| 33 | Suppying chlorinated polyvinyl chloride (CPVC) pipes of make Astral, Supreme, Finolex or its equivalent having thermal stability for hot and cold water supply at site as approved by Engineer-in-charge. |
| 34 | (a) 20 mm nominal bore |
| 35 | (b) 32 mm nominal bore |
| 36 | (c) 40 mm nominal bore |
| 37 | (d) 50 mm nominal bore |
| 38 | (e) 65 mm nominal bore |
| 39 | Supplying chlorinated polyvinyl chloride (CPVC) elbow of make Astral, Supreme, Finolex or its equivalent at site as approved by Engineer-in-charge |
| 40 | (a) 20 mm nominal bore |
| 41 | (b) 32 mm nominal bore |
| 42 | (c) 40 mm nominal bore |
| 43 | (d) 50 mm nominal bore |
| 44 | (e) 65 mm nominal bore |
| 45 | Supplying chlorinated polyvinyl chloride (CPVC) tee of make Astral, Supreme, Finolex or its equivalent at site as approved by Engineer-in-charge |
| 46 | (a) 20 mm nominal bore |
| 47 | (b) 32 mm nominal bore |
| 48 | (c) 40 mm nominal bore |
| 49 | (d) 50 mm nominal bore |
| 50 | (e) 65 mm nominal bore |
| 51 | Supplying chlorinated polyvinyl chloride (CPVC) coupler of make Astral, Supreme, Finolex or its equivalent at site as approved by Engineer-in-charge |
| 52 | (a) 20 mm nominal bore |
| 53 | (b) 32 mm nominal bore |
| 54 | (c) 40 mm nominal bore |
| 55 | (d) 50 mm nominal bore |
| 56 | (e) 65 mm nominal bore |
| 57 | Supplying chlorinated polyvinyl chloride (CPVC) end cap of make Astral, Supreme, Finolex or its equivalent at site as approved by Engineer-in-charge |
| 58 | (a) 20 mm nominal bore |
| 59 | (b) 32 mm nominal bore |
| 60 | (c) 40 mm nominal bore |
| 61 | (d) 50 mm nominal bore |
| 62 | (e) 65 mm nominal bore |
| 63 | (f) 80 mm nominal bore |
| 64 | Supplying chlorinated polyvinyl chloride (CPVC) Male Threaded Adapter (Brass Insert) of make Astral, Supreme, Finolex or its equivalent at site as approved by Engineer-in-charge |
| 65 | (a) 20 mm nominal bore |
| 66 | (b) 32 mm nominal bore |
| 67 | (c) 40 mm nominal bore |
| 68 | (d) 50 mm nominal bore |
| 69 | (e) 65 mm nominal bore |
| 70 | Supplying chlorinated polyvinyl chloride (CPVC) Female Threaded Adapter (Brass Insert) of make Astral, Supreme, Finolex or its equivalent at site as approved by Engineer-in-charge |
| 71 | (a) 20 mm nominal bore |
| 72 | (b) 32 mm nominal bore |
| 73 | (c) 40 mm nominal bore |
| 74 | (d) 50 mm nominal bore |
| 75 | Supplying chlorinated polyvinyl chloride (CPVC) Ball Valve of make of Astral, Supreme, Finolex or its equivalent at site as approved by Engineer-in-charge. |
| 76 | (a) 20 mm nominal bore |
| 77 | (b) 32 mm nominal bore |
| 78 | (c) 40 mm nominal bore |
| 79 | (d) 50 mm nominal bore |
| 80 | (e) 65 mm nominal bore |
| 81 | (f) 80 mm nominal bore |
| 82 | Providing HDPE (High Density Poly Ethylene) pipes, Manufactured as per IS 4984 /2016 and other standards, using high quality product use of PE 100 (SDR-11/PN 12.5) with working temperature from -40°c to +45°(Heating plate for hdpe pipe or any other T&P is included in the item, only labour will be paid seperately) |
| 83 | (a) 50 mm outer dia |
| 84 | (b) 75 mm outer dia |
| 85 | (c) 110 mm outer dia |
| 86 | Providing CPVC Reducer of size 32 mm to 20 mm (1 1/4\\"x3/4\\") of make Astral, Supreme, Finolex or its equivalent at site as approved by Engineer-in-charge |
| 87 | Providing PVC service saddle at site as approved by Engineer-in-charge |
| 88 | (a) 50 * 32 mm |
| 89 | (b) 75 * 32 mm |
| 90 | Supplying solvent cement of approved make at site as approved by Engineer-in-charge.(a) 946 ml in volume |
| 91 | Supplying PTFE TAPE at site as approved by Engineer-in-charge.(a) PTFE TAPE (12 mm width) |
| 92 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 93 | Providing compression fitting for HDPE pipes : Reducing Coupler 110 mm to 75 mm(Heating plate for hdpe pipe or any other T&P is included in the item, only labour will be paid seperately) |
| 94 | Providing compression fitting for HDPE pipes : Tee 110 mm to 75 mm(Heating plate for hdpe pipe or any other T&P is included in the item, only labour will be paid seperately) |
| 95 | Providing compression fitting for HDPE pipes : Tee 75 mm to 50 mm(Heating plate for hdpe pipe or any other T&P is included in the item, only labour will be paid seperately) |
| 96 | TOTAL = 1,020,724.00 |
| 97 | AFTER GST CORRECTION FACTOR OF 0.973 = 993,164.00 |
| 98 | Special Conditions :- (Part of Agreement as well as BOQ) 1. The Contractor shall be required to respond to and attend to complaints within a maximum timeframe of three (3) days from the date of receipt. 2. If the Contractor fails to attend to three (3) complaints within the stipulated timeframe without proper justification and prior approval from the contracting authority, the contracting authority reserves the right to cancel the Agreement and terminate the contract.3. In the event that contractor fails to attend to a complaint within the specified timeframe without proper justification and prior approval from the contracting authority, a penalty of INR 2,000 (Indian Rupees Two Thousand) per day shall be imposed, up to a maximum penalty of INR 50,000 (Indian Rupees Fifty Thousand) per complaint. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysNov 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender