Power Boards / Undertakings / PSU Closing in 8 days TDR #58225813

Tender For Mtps-Ii - Tgm&Ca Division - Inspection, Cleaning And Hydraulic Testing Of Turbine Lube Oil Cooler -A, Tdbfp A&B Lube Oil Coolers, Mdbfp Lube Oil, Working Oil Cooler-A & B, Eh Oil Coolers,Vacuum Pump Heat Exchanger-A, Replacement Of Tube Ne

Issued by Boards / Undertakings / PSU · Salem, Tamil Nadu
Tender Value
Ref. Documents
Estimated cost
Bid Submission
10 Nov 2026
8 days left
EMD
8800
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Salem → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Mtps-Ii - Tgm&Ca Division - Inspection, Cleaning And Hydraulic Testing Of Turbine Lube Oil Cooler -A, Tdbfp A&B Lube Oil Coolers, Mdbfp Lube Oil, Working Oil Cooler-A & B, Eh Oil Coolers,Vacuum Pump Heat Exchanger-A, Replacement Of Tube Nest In Vacuum Pump Heat Exchanger B And Replacement Of Upper And Lower Shell Gaskets In Turbine Lube Oil Cooler-B During Capital Overhauling-2026.

BOQ

Name of Work:- MTPS-II - TGM&CA Division – Inspection, cleaning and hydraulic testing of Turbine lube oil cooler -A, TDBFP A&B Lube oil Coolers, MDBFP Lube oil, Working oil cooler-A & B, EH oil coolers,Vacuum Pump Heat exchanger-A, Replacement of Tube nest in Vacuum Pump Heat Exchanger B and replacement of upper and lower shell gaskets in Turbine Lube Oil cooler-B during capital overhauling-2026.
Sl. No. Item Description
1Inspection and cleaning of Turbine Lube Oil Cooler A: Dismantling of Top water box, cleaning of all tubes with nylon brush, hydraulic testing of tube nest, plugging of punctured tubes if any, cleaning of top and bottom water box, cleaning of all flange seating areas, providing new oil and water gaskets, assembling and tightening of all parts including the cost of consumables and T&P charges.
2Inspection, cleaning and replacement of upper & lower shell gasket in Turbine Lube Oil Cooler B: a) Dismantling of Top water box, cleaning of all tubes with nylon brush, hydraulic testing of tube nest, plugging of punctured tubes if any, cleaning of top and bottom water box, cleaning of all flange seating areas, providing new oil and water gaskets, assembling and tightening of all parts including the cost of consumables and T&P charges.
3b) Dismantling of Bottom water box by loosening of bolts & nuts and bring down from 8.5 meter to '0' meter by using the chain block & special tackles, replacemet of damaged water gaskets and rubber chord with suitable size and cleaning flange seating area including the cost of consumables and T&P charges.
4c) Lifting of MOT Cooler Tube nest 'B' from shell , Removing and cleaning of oil sludges deposit on the tube nest without any oil traces by water & air , providing new oil gasket and positioning of MOT Tube nest 'A' in the upper shell including dismantling and assembling of air ventilation duct in 8.5 mtr as per engineer in charge with the cost of consumables and T&P charges.
5Inspection and cleaning of TDBFP A&B, MDBFP Lube Oil Coolers: Dismantling of Front water box, cleaning of all tubes with nylon brush, hydraulic testing of tube nest, plugging of punctured tubes, cleaning of front and rear water box, cleaning of all flange seating areas, providing new oil and water gaskets, assembling and tightening of all parts including the cost of consumables and T&P charges.
6Inspection and cleaning of MDBFP Working Oil Coolers A: Dismantling of Front water box, cleaning of all tubes with nylon brush, hydraulic testing of tube nest, plugging of punctured tubes, cleaning of front and rear water box, cleaning of all flange seating areas, providing new oil, water gaskets and rubber chords, assembling and tightening of all parts and painting 2 coats of enamel paint including the cost of consumables and T&P charges.
7Inspection ,cleaning & flaring of Tube ends of MDBFP Working Oil Cooler B: a) Dismantling of Front water box, cleaning of all tubes with nylon brush, hydraulic testing of tube nest, plugging of punctured tubes, cleaning of front and rear water box, cleaning of all flange seating areas, providing new oil, water gaskets and rubber chords, assembling and tightening of all parts and painting 2 coats of enamel paint including the cost of consumables and T&P charges.
8b) Flaring the SS tube ends of the leakage tubes by using special tools,welding, Grinding, and other connected works including cost of consumables and T&P charges.
9Inspection and cleaning of Vacuum Pump Heat exchanger - A Dismantling of Front water box, cleaning of all tubes with nylon brush, hydraulic testing of tube nest, plugging of punctured tubes, cleaning of front and rear water box, cleaning of all flange seating areas, providing new oil and water gaskets, assembling and tightening of all parts including the cost of consumables and T&P charges.
10Replacement of Tube nest in Vacuum Pump Heat Exchanger 'B': a) Draining of water from shell and tubes including the cost of consumables and T&P charges.
11b) Dismantling of water box, releasing the existing eroded tube nest, cleaning of water box & outer shell, cleaning of all flange seating areas, positioning the spare tube nest and hydraulic testing of tube nest & providing new water gaskets, assembling and tightening of all parts including the cost of consumables and T&P charges.
12c) Lifting the eroded tube nest after complete cleaning the tube nest & Transporting the removed tube nest to repair bay, lifting the new spare tube nest aftere complete cleaning of tubes by water & air, transporting the spare tube nest from repair bay to the location as per the instruction of Board engineer including the cost of consumables and T&P charges.
13Inspection and cleaning and hydraulic testing of E.H Oil Coolers: Dismantling of Front water box, cleaning of all tubes with nylon brush, hydraulic testing of tube nest, plugging of punctured tubes, cleaning of front and rear water box, cleaning of all flange seating areas, providing new oil and water gaskets, assembling and tightening of all parts including the cost of consumables and T&P charges. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58225813
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE Ref. Documents
LAST DATE 10-11-2026
Authority
Authority Name Tamil Nadu Generation And Distribution Corporation Limited
Work Description Tender for Mtps-Ii - Tgm&Ca Division - Inspection, Cleaning And Hydraulic Testing Of Turbine Lube Oil Cooler -A, Tdbfp A&B Lube Oil Coolers, Mdbfp Lube Oil, Working Oil Cooler-A & B, Eh Oil Coolers,Vacuum Pump Heat Exchanger-A, Replacement Of Tube Nest In Vacuum Pump Heat Exchanger B And Replacement Of Upper And Lower Shell Gaskets In Turbine Lube Oil Cooler-B During Capital Overhauling-2026.
Basic Detail
Tender No OT 27/26-27
Bidding Type Tender
Location
City Salem
State Tamil Nadu
Key Dates
Publish Date 27 Oct 2026
Submission Date 10 Nov 2026
Open Date 11 Nov 2026
Finance
Tender Value Ref. Documents
Tender Fee Ref. Documents
EMD 8800
Exemption Available
Document List
BOQ_862654.xls
e030def5-b2b3-403d-b408-0bf45acf8754.html
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Oct 27, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 10, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 8 days
Nov 11, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 9 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_862654.xls

html

e030def5-b2b3-403d-b408-0bf45acf8754.html

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender