Tender For E_Tender For Annual Rate Contract For Fabrication, Replacement, Repairing, Reconditioning And Machining Works
Tender Value
Ref. Documents
Estimated cost
Bid Submission
16 Nov 2026
16 days left
EMD
5000
Bank guarantee accepted
Document Fee
1120
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thrissur → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for E_Tender For Annual Rate Contract For Fabrication, Replacement, Repairing, Reconditioning And Machining Works
BOQ
| Sl. No. | Item Description |
| 1 | Description of Works |
| 2 | Fabrication & Replacement of two way valves (MS)[Size: 200mmx200mm, 250mmx250mm, 300mmx300mm] |
| 3 | Fabrication & Replacement of two way valves (SS) [Size: 200mmx200mm, 250mmx250mm, 300mmx300mm] |
| 4 | Servicing & Replacement of two way valves (MS)[Size: 200mmx200mm, 250mmx250mm, 300mmx300mm] |
| 5 | Servicing & Replacement of two way valves (SS)[Size: 200mmx200mm, 250mmx250mm, 300mmx300mm] |
| 6 | Repairing / Servicing & Replacement of sliding gate valves under proportioning bins [Replacement of bearings, Dismantling and bend correction of gate, replacement of shutters if necessary] |
| 7 | Repairing / Servicing & Replacement of sliding gate valves [Valves above silos, Under conveyors, Under mash bins and buffer bins etc.,] (Replacement of bearings, Dismantling and bend correction of gate, replacement of shutters if necessary) |
| 8 | Fabrication & Replacement of chute (MS)[Size : 200mmx200mm, Chute of 250mmx250mm, Chute of 300mmx300mm] |
| 9 | Fabrication & Replacement of Connecting hoppers to Elevators |
| 10 | Fabrication & Replacement of Connecting hoppers to Pellet sieves |
| 11 | Fabrication & Replacement of Elevator chute[Size : 206 x 206, Elevator chute of 225 x 275, Elevator chute of 276 x 331] |
| 12 | Fabrication & Replacement of Pellet cooler outlet round chute |
| 13 | Reconditioning & Replacement of mash door conveyor by changing the gate valve (SS) |
| 14 | Fabrication & Replacement of elevator chute as split type with connecting flanges.[Size : 206 x 206, 225 x 275, 276 x 331] |
| 15 | Fabrication of plates for conveyors. |
| 16 | Middle plate fabrication |
| 17 | Side plate fabrication |
| 18 | Top plate fabrication |
| 19 | Bottom plate fabrication |
| 20 | Cutting and fixing studs on side plate for fixing inspection door |
| 21 | Fabrication of hammer mill sieves [500 x 1000 mm, 660 x 1000 mm] |
| 22 | Reconditioning of old hammer mill sieves [500 x 1000 mm, 660 x 1000 mm] |
| 23 | Reconditioning of old hammer mill guide plate |
| 24 | Dismantling & Re-fixing of street lights in KFL compound, Lights in FPG, RMG & in Silo areas(Dismantling from the point and re-fixing) |
| 25 | FPG & RMG |
| 26 | Old & New Silo |
| 27 | Street light |
| 28 | Open yard |
| 29 | Dismantling & Re-fixing of Exhaust Fans in FPG & RMG (Dismantling from the pointand re-fixing) |
| 30 | Coupling & Sprocket Boring (Boring, Keyway cutting, Drilling & Tapping) |
| 31 | Lovejoy Jaw Coupling / Tyre Coupling (Rate for 1 set) |
| 32 | BC-4, BC-5,BC-6/BC-6B (Rate for 1 set) |
| 33 | NBC-7 (Rate for1 set) |
| 34 | NBC-9 (Rate for 1set) |
| 35 | Chain drive sprocket boring (Rate for 1 piece) |
| 36 | Duplex sprocket IC-11 conveyor (Rate for 1 piece) |
| 37 | Duplex sprocket DC-1 conveyor (Rate for 1 piece) |
| 38 | Fabrication & Rectification of Portable conveyor drum |
| 39 | Fabrication of Portable conveyor drum |
| 40 | Rectification of Portable conveyor drum |
| 41 | Rectification of elevator drum with rib changing |
| 42 | Dia 400 mm |
| 43 | Dia 500 mm |
| 44 | Dia 600 mm |
| 45 | Rectification of rotating bin unloader by changing the blade |
| 46 | Replacement of Roofing & Side cladding sheets |
| 47 | Replacement of roofing sheets of Feed Mill Plant / Silo dumping area (Sheet length11 / 13/ 15/16 feet) |
| 48 | Replacement of side cladding sheets of Feed Mill Plant (Sheet length 11 / 13/15/16 feet) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysNov 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender