Tender For Repair/ Replacements Of Wooden And Steel Furniture Including Painting And Varnishing Connected Items At 8 Fbsu, Af Awantipur
Tender Value
25 Lakhs
Estimated cost
Bid Submission
17 Nov 2026
21 days left
EMD
50000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
srinagar → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repair/ Replacements Of Wooden And Steel Furniture Including Painting And Varnishing Connected Items At 8 Fbsu, Af Awantipur
BOQ
| Sl. No. | Item Description |
| 1 | Side Rack 3 spaces Steel (FD-1023):- M&L for preparing surface including rusted portion of Rack Side steel 3 space by scrubbing with sand paper applying one coat synthetic enamel paint of existing colour to complete by brush/Gun rack inside and outside all as specified and directed by Engineer-in-Charge. |
| 2 | Rack Six/seven tiers steel (FD-1038):- M&L for preparing surface including rusted portion of Rack Side steel sixt tiers by scrubbing with sand paper applying one coat synthetic enamel paint of existing colour by brush/Gun to complete rack inside and outside all as specified and directed by Engineer-in-Charge. |
| 3 | Almirah large steel FD-1031 & 1033 : - (a) Supply and fixing of locks three lever of Almirah large steel along with duplicate keys ISI marked or as approved by Engr-in-Charge. |
| 4 | (b) Supply and fixing of handle of Almirah large steel of ISI marked or as approved by Engineer-in-charge. . |
| 5 | (c) M&L for preparing surface including rusted portion of Almirah large steel by scrubbing with sand paper applying one coat synthetic enamel paint of exisitng colour by brush/Gun to complete rack inside and outside all as specified and directed by Engineer-in-Charge. |
| 6 | Almirah medium/small steel FD- 1032 : - (a) Supply and fixing of locks three lever of Almirah large steel along with duplicate keys ISI marked, all as specified and directed by Engineer-in-Charge. |
| 7 | (b) Supply and fixing of handle of Almirah medium steel of ISI marked or as approved by Engineer-in-charge. . |
| 8 | (c) M&L for preparing surface including rusted portion of Almirah medium steel by scrubbing with sand paper applying one coat synthetic enamel existing paint by brush/Gun to complete rack inside and outside all as specified and directed by Engineer-in-Charge. |
| 9 | LOCKER BED SIDE STEEL FD-1029: (a) Supply and fixing of hasp and staple of size 75x40x3mm including handles as per drg and all as specified and directed by Engineer-in-Charge. |
| 10 | (b) M&L for preparing surface including rusted portion of locker bed side steel by scrubbing with sand paper applying one coat synthetic enamel existing paint by brush/Gun to complete rack inside and outside all as specified and directed by Engineer-in-Charge. |
| 11 | (c) Replacement of old/broken CP handle 100 mm long fixwd with steel screw complete as per drg. |
| 12 | TABLE OFFICE CLERK STEEL 1004:- (a) Removing unserviceable top and replace new top of size 1200 X 600 mm made of 19 mm thick prelaminated particle board one side T/F (Exterior Grade). Hard wood beading shall be provided around as per trade practice. |
| 13 | (b) M&L for preparing surface including rusted portion of table by scrubbing with sand paper applying one coat synthetic enamel existing paint by brush/Gun to complete all as specified and directed by Engineer-in-Charge. |
| 14 | TABLE OFFICE OFFRS STEEL FD-84,1003 :- (a) Removing unserviceable top and replace new top of size 1680 X 920mm made of 19 mm thick prelaminated particle board one side T/F (exterior grade). Teakwood Beading 4mm thick around shall be provided all-round as per trade practice all as specifed and directed by Engineer-in-Charge. |
| 15 | (b) M&L for preparing surface including rusted portion of table by scrubbing with sand paper applying one coat synthetic enamel paint of exisitng colour by brush/Gun to complete all as specified and directed by Engineer-in-Charge. |
| 16 | TABLE 900 X 900 MM FD-1009:- (a) Removing unserviceable top and replace new top made of 18mm thick prelaminated particle board (Exterior Gde) with Teakwood Beading around as per trade practice. |
| 17 | (b) M&L for preparing surface including rusted portion of table by scrubbing with sand paper applying one coat synthetic enamel paint of existing colour by brush/Gun to complete all as specified and directed by Engineer-in-Charge. |
| 18 | Replacement of top of under mentioned items of furniture with new prelaminated particle board 18/19mm thick and providing with 4mm thick teak wood edging fixed with headless nails, all as shown on drg and directed by Engr-in-Charge. |
| 19 | (a) Table 3’x3’. FD-88, 288, 291 |
| 20 | (b) Applying a coat of french polish (gloss finish) all as specified and directed by Engineer-in-Charge. |
| 21 | (c) Table 3’x2’ with and without drawer.FD-41,42,55,209,283,284 |
| 22 | (d) Applying a coat of french polish (gloss finish) all as specified and directed by Engineer-in-Charge. |
| 23 | (e) Table centre.FD-29,134,152,235,267 |
| 24 | (f) Applying a coat of french polish (gloss finish) all as specified and directed by Engineer-in-Charge. |
| 25 | (g) Table writing.FD-33,249,275 |
| 26 | (h) Applying a coat of french polish (gloss finish) all as specified and directed by Engineer-in-Charge. |
| 27 | (j) Table dining for eight persons.FD-273 |
| 28 | (k) Applying a coat of french polish (gloss finish) all as specified and directed by Engineer-in-Charge. |
| 29 | (l) Table Clerk Wooden FD-31 |
| 30 | (m) Applying a coat of french polish (gloss finish) all as specified and directed by Engineer-in-Charge. |
| 31 | (n) Teapoy Verandah FD-255 |
| 32 | (o) M&L for preparing surface including rusted portion of table by scrubbing with sand paper applying one coat synthetic enamel existing colour by brush/Gun to complete all as specified and directed by Engineer-in-Charge. |
| 33 | (p)Teapoy wooden, FD-382 |
| 34 | (q) Applying a coat of french polish (gloss finish) all as specified and directed by Engineer-in-Charge. |
| 35 | (r)Table peg, FD-384 |
| 36 | (s) Applying a coat of french polish (gloss finish) all as specified and directed by Engineer-in-Charge. |
| 37 | (t)Table dinning (1200 X 900 mm) FD/MAP-II/03 |
| 38 | (u) Applying a coat of french polish (gloss finish) all as specified and directed by Engineer-in-Charge. |
| 39 | TABLE DINNING OR'S: FD-165 (a) Replacement of old top of table dining ORs with new top of pre-laminated particle board exterior grade 18/19mm thick and providing with 4mm thick teak wood edging ½ round fixed with appropriate size of screw full threaded, all as per drg and all as specified and directed by Engineer-in-Charge. |
| 40 | (b) M&L for preparing surface including rusted portion of table by scrubbing with sand paper applying one coat synthetic enamel existing paint by brush/Gun to complete all as specified and directed by Engineer-in-Charge. |
| 41 | CHARPOY GI PIPE/IP WITH PLYWOOD TOP FD-220FDMAP-II/01:- Replacement of broken/unserviceable ply wood commercial both side top and fix new ply wood top of size 1980mmx900mmx12mm BWR Gde with nut and bolts all as specified and directed by Engineer-in-Charge. |
| 42 | CHAIR DINING: FD-16, FD-279:- (a) Removing of unserviceable cane from chair dining and recanning of seat as per Godrej pattern with plastic cane white in colour of size 2mm to 2.5mm complete all as specified and directed by Engineer-in-Charge. |
| 43 | (b) Provn of Hard PVC Buffers for chair dining completeall as specified and directed by Engineer-in-Charge. |
| 44 | (c) Applying a coat of french polish (gloss finish) all as specified and directed by Engineer-in-Charge. |
| 45 | CHAIR WRITING: FD-20, FD-280:- (a) Removing of unserviceable cane from chair writing and recanning of seat as per Godrej pattern with plastic cane white in colour of size 2mm to 2.5mm complete all as specified and directed by Engineer-in-Charge. |
| 46 | (b) Provn of Hard PVC Buffers for chair writing complete all as specified and directed by Engineer-in-Charge. |
| 47 | (c) Applying a coat of french polish (gloss finish) all as specified and directed by Engineer-in-Charge. |
| 48 | CHAIR EASY: (FD-299 & FD-17):- (a) Removing of unserviceable cane from Chair easy and recanning of seat as per Godrej pattern with plastic cane white in colour of size 2mm to 2.5mm complete all as specified and directed by Engineer-in-Charge. |
| 49 | (b) Provn of Hard PVC Buffers for chair Easy complete all as specified and directed by Engineer-in-Charge. |
| 50 | (c) Applying a coat of french polish (gloss finish) all as specified and directed by Engineer-in-Charge. |
| 51 | CHAIR VERANDAH FD-256:- (a) Removing of unserviceable cane from Chair easy and recanning of seat as per Godrej pattern with plastic cane white in colour of size 3.5 mm to 4 mm complete all as specified and directed by Engineer-in-Charge. |
| 52 | (b) M&L for preparing surface including rusted portion of table by scrubbing with sand paper applying one coat synthetic enamel existing paint by brush/Gun to complete all as specified and directed by Engineer-in-Charge. |
| 53 | (c) PVC buffers to the leg of chair be fixed all as specified and directed by Engineer-in-Charge. |
| 54 | Sofa Set 5/4/2 Seater(FD-281):- (a) Replacement of old/unserviceable foam cushion with tapestry cloth and S&F new foam cushion 40 density of size 21\\"x22\\"x4\\" duly covered and stitching with tapestry cloth (Not less then 200/- Mtr) all as specified and directed by Engineer-in-Charge. |
| 55 | (b) Applying a coat of french polish (gloss finish) all as specified and directed by Engineer-in-Charge. |
| 56 | Bed Hard with ply wood top (FD-246)/FD/E6/MAP/08(R):- (a) Replacement of broken/unserviceable ply wood commercial both side top and fix new ply wood top of size 1980mmx900mmx12mm BWR Gde all as specified and directed by Engineer-in-Charge. |
| 57 | (b) Applying a coat of french polish (gloss finish) all as specified and directed by Engineer-in-Charge. |
| 58 | Note:-An amount of Rs.3775.00 on account of credit schedule for Sch 'A' Part-II Shall be deducted from the total amount of BOQ to arrive at the contract sum. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 27, 2026
11:30 IST
Tender Published
Tender notice published.
TodayNov 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysNov 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender