Tender For Special Repair To Bldg No P-34 (Offrs Single Qtr 4 Capt D/S) At 25 Idsr Under Age B/R Dett-B Of Ge 862 Ews
Tender Value
34.53 Lakhs
Estimated cost
Bid Submission
17 Nov 2026
14 days left
EMD
69100
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Rajouri → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg No P-34 (Offrs Single Qtr 4 Capt D/S) At 25 Idsr Under Age B/R Dett-B Of Ge 862 Ews
BOQ
| Sl. No. | Item Description |
| 1 | M&L for 10mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes complete all as specified and directed. |
| 2 | M&L for glazed ceramic coloured tiles of size 450 x 350 x 7mm thick, (premium quality) on vertical surface of wall such as dado, skirting, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 10mm thick rendering in cement mortar 1:3, after dismantling old unserviceable of tiles, complete all as specified and directed. |
| 3 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick (premium quality) square/ rectangular, area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 15mm thick screed bed in cement mortar 1:4, after dismantling old unserviceable of tiles, complete all as specified and directed. |
| 4 | M&L for vitrified tiles light shade 10 mm thick (square/ rectangular) polished with highliter border of approved colour pattern, area of each tiles not exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface, laid over and including 15 mm thick screed bed in CM 1:4 complete all as specified and directed. after dismantling old unserviceable of tiles, complete all as specified and directed. |
| 5 | M&L for vitrified ceramic tiles double charged 10 mm thick of approved colour polished with highliter border, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface, laid over and including 15 mm thick screed bed in cement mortar 1:4 after dismantling old unserviceable of tiles, complete all as specified and directed. |
| 6 | M&L for 20mm thick granite stone slab (of any type) work (table rubbed and polished) in cooking platforms, in steps, pillars, window cills, etc, laid over 15mm thick bedding in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite slab, rounding edges etc after dismantling of old unserviceable granite stone slab of any size, complete all as specified and directed. |
| 7 | M&L for 20mm thick marble (table rubbed and polished) of any colour in flooring, cooking platforms, in steps, pillars, window cills, etc, laid over 15mm thick bedding in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite slab, rounding edges etc complete all as specified and directed. |
| 8 | M&L for rendering 10mm thick in cement mortar 1:3 on fair faces of brick or concrete surfaces finished even and rough for receiving wall tiles/dado complete all as specified and directed. |
| 9 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 10 | M&L for 75 mm thick cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in plinth protection laid to slop of 1:12, finished surface even and fair without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 6 mm wide joints through out the thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) complete all as specified and directed. Note :- Joint filler will be measured and paid separately under respective item. |
| 11 | Demolition of reinforcement cement concrete in roofs, beams, staircase, chajjas and similar suspended work complete all as specified and directed. |
| 12 | M&L for reinforcement cement concrete nominal mix type B1 1:2:4 (using 20 mm graded stone aggregate) in slab supported on wall, beam and column in floors, roofs, landing,balconies, canpopies, chajjas etc complete all as specified and directed. |
| 13 | S&F of TMT bars 10 mm dia cut out length bent to shape including cranking, bending and binding with 0.9mm dia mild steel wire or securing with clip complete all as specified and directed. |
| 14 | Formwork to soffits of suspended slabs such as roof slab, floor slab, landing and similar work not exceeding 200 mm thick (horizontial or sloping) complete all as specified and directed. |
| 15 | Formwork to edge of concrete flat, treads, breaks in floors, window cill opening in concrete wall and similar work exceeding 5 cm wide and not exceeding 10 cm wide complete all as specified and directed. |
| 16 | M&L for brick work with sub class ‘B’ old size bricks straight or curved on plan exceeding 6.00 m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 17 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillers etc complete all as specified and directed. |
| 18 | Taking down cement or cement lime plaster any description on any walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 19 | M&L for rendering 5 mm thick in cement mortar 1:4 with water proofing compound @ 3% by weight of cement over 10mm thick in CM 1:6 on external surfaces of walls of block masonry finished even & smooth without using extra cement complete all as specified and directed.Note :- WPC will be measured and paid separately under respective item. |
| 20 | M&L for rendering 10mm thick on fair faces of brick/ stone work or concrete surface in CM (1:6) as in wall, finished even and smooth without using extra cement complete all as specified and directed. |
| 21 | M&L for rendering 5 mm thick on fair faces of brick/ stone work or concrete surface in CM (1:3) as in ceilings, finished even and smooth without using extra cement, complete all as specified and directed. |
| 22 | M&L for preparation of new plastered wall surface including cornices etc and applying two coats of exterior emulsion all weather proof paint of Apex Ultima of ASIAN or equivalent (multi colour pattern as approved by GE) over and including a coat of primer complete all as specified and directed. |
| 23 | M&L for preparation of new plastered wall surfaces including cornices applying two coats of distemper oil emulsion paint over a coat of primer including 1mm thick wall care putty, complete all as specified and directed. |
| 24 | M&L for preparation of new plastered surfaces including cornices applying two coats of distemper oil emulsion paint over a coat of primer on ceilings, complete all as speicied and directed. |
| 25 | Taking down chowkhat or frame with shutter (without taking off shutter from the frame) exceeding 1.5 sqm but not exceeding 4.0 sqm each complete all as specified and directed. |
| 26 | Taking down chowkhats or frames area not exc. 1.50 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed. |
| 27 | S&F of powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors,windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size,including necessary filling up the gaps at junctions, i.e. at top,bottom and sides with required EPDM rubber/ neoprene gasket etc aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as specified and directed. Please Enable Macros to View BoQ information |
| 28 | S&F of powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors,windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size,including necessary filling up the gaps at junctions, i.e. at top,bottom and sides with required EPDM rubber/ neoprene gasket etc aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysNov 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender