Tender For Renovation And Painting Of Main Entrance Gate And Boundary Wall At Aiitms Patna.

Sharing tender

Tender For Renovation And Painting Of Main Entrance Gate And Boundary Wall At Aiitms Patna. 1 2 1 5 Exceeding 30 Cm In Depth But Exceeding 1.5 M In Width As Well As 10 Sqm On Plan Including Getting Out And Disposal Of Excavated Earth Upto 50 M And Lift Upto 1.5 M, As Directed By Engineer In Charge All Kinds Of Soil Stone Work (Machine Cut Edges) For Wall Lining Etc. (Veneer Work) Upto 10 Metre Height, Backing Filled With A Grout Of Average 12 Min Thick Omment Mortar 1:3 (1 Cement: 3 Coarse Sand) Including Pointing In White Cement Mortar 1:2 (1 White Cement: 2 Stone Dust) With An Admixture Of Pigment Matching The Stone Shade: (To Be Secured To The Backing And The Sides By Means Of Cramps And Pins Which Shall Be Paid For Separately) Red Sand Stone-Exposed Face Fine Dressed With Rough Backing 30 Mm Thick Providing And Fixing Stainless Steel Crampe Of Required Size And Shape For Anchoring Stone Wall Lining To The Backing Or Securing Adjacent Stones In Stone Wall Lining In Umsent Mortar 12 (1 Cement: 2 Coarse Sand), Including Making The Necessary Chases In Stone And Holes In Walls Wherever Requiral Wall Painting With Acrylic Emulsion Paint, Having Voc (Volatile Organic Compound) Content Less Than 50 Grams Litre, Of Approved Brand And Manufacture, Including Applying Additional Coats Wherever Required, To Achieve Even Shade And Colour. Two Cont Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture Of Required Colour To Give An Even Shade One Or More Coats On Old Work Laying Old Cement Cocrete Interlocking Paver Blocks Of Any Design Shape Laid In Required. Line, Level, Cürvaturs, Colour And Patterns Over And Including 50 Mm Thick Compacted Bed Of Course Sand, Filling The Joints With Fine Sand Etc, All Complete As Per The Direction Of Engineerin-Charge. (Old Cc Paver Blocks Shall Be Supplied By The Department Flee Of Cost) Providing And Laying Factory Made Chamfered Edge Cement Concrete Paver Blocks In Footpath, Parks, Lawus, Drive Ways Or Light Traffic Parking Etc, Of Required Strength, Thickness & Size/ Shape, Made By Table Vibratory Method Using Plu Mould, Laid In Required Colour & Pattern Over 50Mm Thick Compacted Bed Of Sand, Compacting And Proper Embedding Laying Of Inter Locking Paver Blocks Into The Sand Bedding Layer Through Vibratory Compaction By Using Plate Vibrator, Filling The Joints With Sand And Cutting Of Paver Blocks As Per Required Size And Pattern, Finishing And Sweeping Extru Sand. Complete All As Per Direction Of Engineer-In-Charge. 60Mm Thick Cement Concrete Paver Block Of M-35 Grade With Approved Colour, Design