Tender For Raising Of cement concrete Road And Construction Of Reinforced Cement Concrete Drain Work (Ved Bhatta Side) In Village Roza Jalalpur, Greater Noida.
Tender Value
3.08 Crore
Estimated cost
Bid Submission
12 Nov 2026
12 days left
EMD
6.17 Lakhs
Bank guarantee accepted
Document Fee
4860
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gautam Buddha Nagar → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Raising Of cement concrete Road And Construction Of Reinforced Cement Concrete Drain Work (Ved Bhatta Side) In Village Roza Jalalpur, Greater Noida.
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) (DSR-2023/15.2.1) |
| 2 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. : In cement mortar (DSR-23/15.7.4) |
| 3 | Cartage of ballast, Kankar Coal, grit or sand including loading & unloading but excluding stackings on pakka roads: 1st Km. (SOR-25/Ch-4/4.02/232(a)) |
| 4 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineerin- charge. : All kinds of soil (DSR-2023/2.6.1) |
| 5 | Centering and shuttering including strutting, propping etc. and removal of form for : (DSR-2023/5.9) |
| 6 | Foundations, footings, bases of columns, etc. for mass concrete (DSR-2023/5.9.1) |
| 7 | Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.(DSR-2023/5.9.2) |
| 8 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) (DSR-2023/4.1.8) |
| 9 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. |
| 10 | Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. : All works upto plinth level : Concrete of M25 grade with minimum cement content of 330 kg /cum (DSR-2023/5.33.1.1) |
| 11 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. : Thermo-Mechanically Treated bars of grade Fe-500D or more. (DSR-2023/5.22.6) |
| 12 | Laying of Interlocking Tiles of 60/80/100 mm thick including levelling and dressing of surface up to required level and slopes over 30 mm thick bed and filling joints with fine sand including cost of fine sand, labour, T&P etc complete But excluding cost of Tile as directed by Engineer in charge. (SOR-2025/5.5.07) |
| 13 | Supply of 80mm thick ISI marked Shaped machanically compressed Interlocking cement concerete paver blocks, smooth high laoss finish, skid resistant; manufactured from rubber moulds through vibrocompressiojn mechanism, high pressure and control vibration machine having plan dimension 200 x (160+120mm) with minimum 5mm thick topping. The compressive strength of concerete paver block shall not be less than 30 MPa and weight 4.5kg per No. confirming to IS: 15658-2006. : Gray Base (SOR-2025/2.5(a)) |
| 14 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) (DSR-2023/4.1.3) |
| 15 | Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in : Cement Mortar 1:6 (1 cement : 6 coarse sand). (DSR-2023/6.2.2) |
| 16 | Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20mm nominal size derived from natural sources). (DSR-2023/4.11) |
| 17 | 12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) (DSR-2023/13.4.2) |
| 18 | Supply of Dewatering Pump 10 HP (MORTH Sno-109, Chapter-20/P746) |
| 19 | Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality : EHD - 35 : Circular shape 560 mm internal dia (DSR-2023/19.19.4.1) |
| 20 | Providing and fixing pre-moulded joint filler in expansion joints of RCC roads / CC pavements after making the joints dust free with high pressure air jet cleaners, all complete as per direction of the Engineer-in-Charge. (Pre-moulded joint fillers shall be made of bitumen hot sealing compound impregnated fibre board having impregnation more than 35%, conforming to IS:1838 for fibre board and IS: 1834 for hot sealing bitumen compound grade A.) (DSR-2023/16.45) |
| 21 | Labour cess and GST will be paid extra as per Govt. orders. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysNov 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender