Tender For Boq For The Work - Reparing Of Urban Health Centre At Ward 10 Mela Tand Under Nagar Panchayat Khunti 2026-27
Tender Value
24.82 Lakhs
Estimated cost
Bid Submission
02 Nov 2026
5 days left
EMD
49648
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Khunti → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Boq For The Work - Reparing Of Urban Health Centre At Ward 10 Mela Tand Under Nagar Panchayat Khunti 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Taking down old door and window shutters including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. |
| 2 | Taking down chaukhats in doors including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. |
| 3 | Taking down chaukhats in windows including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. |
| 4 | Supplying, fitting and fixing good quality, well dressed and well seasoned sal wood work in choukhat in doors, windows, skylights, fanlights and C/W celetial window openings, includingwedge over all clampscomplete includingapplicationof two coatsof wood preservativeof approved quality on the surface bbutting walls and lintels all completeas per building specificationand direction of E/I |
| 5 | Supplying, fitting and fixing 30mm thick solid core type decorative single leaf flush door shutter with both sides decorative veneered with black board core bended with high quality phenol formal dehydes synthetic resin of standard make with Aluminium fittings such as hinges, tower bolts, handle, cleats and sand blocks and taxes all complete as per building specification and direction of E/l. |
| 6 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : |
| 7 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thicknes |
| 8 | With float glass panes of 8 mm thickness |
| 9 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. 600 x 600 mm size |
| 10 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).specification and direction of E/I. 600 x 600 mm size |
| 11 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick |
| 12 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. |
| 13 | Providing and laying 1st quality Ceramic glazed wall tiles thickness to be specified by the manufacturer) in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointed with white cement including rubbing polishing and cost of curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 14 | Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge. |
| 15 | Covering of treated surface with PCC :- Providing 50 mm thick Cement Concrete M20(1:1.5:3) maintaining slope in alternate 2 mt x 2 mt panels with aaproved quality of stone chips of 20 mm to 6 mm size graded and cleaned sand of FM 2.5 to 3 including screening , shuttering and mixing cement concrete in mixer with admixture of integral water proofing and placing in position , striking , curing , taxexs and royality all complete as per building specifications and directions of E/I |
| 16 | Providing 6mm thick cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5 |
| 17 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 18 | Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding, washing of floors and taxes all complete as per building specification and direction of E/l. |
| 19 | Providing two coat of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface throughly , scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I. |
| 20 | Wiring for light point/ fan point/exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single care cable in surface/ recessed PVC condult with modular switch modular plate suitable Gl box etc as required. |
| 21 | Wiring for light/ power plug with 2x4 sq. mm FR PVC Insulated copper conductor single core cable in surface/ recessed PVC condult alongwith 1 No 4 sq. mm FR PVC Insulated copper conductor single core cable for leop earthing as required. |
| 22 | Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit as required |
| 23 | 2x2.5 sq mm 1x2.5 sq mm earth wire |
| 24 | Supplying and foang following moduler switch socket on the existing madular plate & switch box including connections but excluding modular plate etc as required. |
| 25 | 15/16 amp one way switch |
| 26 | 5/8 amp 3 pin socket outlet |
| 27 | 5/16 amp 5 pin socket outlet |
| 28 | Supplying and foang stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc as required. |
| 29 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
| 30 | 1 or 2 Module (78mm x 75mm x 45mm)-For Telephone & TV outlet |
| 31 | 4/5 Module (78mm x140mm x 50mm) |
| 32 | 8/9 Module (76mmX230mmx50mm) |
| 33 | Supplying and frương 2 pin 5 Amp Ceiling rose on the existing junction box wooden block Including connection etc as required. |
| 34 | Supplying and fuơng brass betten/ angle holder including connection etc. as required. |
| 35 | Installation testing and commissioning of pre wired fluorescent fitting / Compact fluorescent fitting off all type complete with all accessories and tute etc directly / wall including connection with 1.5 sq.mm FR PVC insulatted copper conductor single core cable and earthing etc. as required. |
| 36 | Installation testing and commissioning of ceiling fan including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FR PVC insulated copper conductor single core cable etc. as required. |
| 37 | 6 Way (4+18) Double Door Horizontal Type |
| 38 | Supplying and fixing 6 Amp to 32 Amp rating 240 volts 10 KA \\"C\\" Curve Miniature Circuit Breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections testing and commissioning etc. as required. |
| 39 | 6/32 Amp TPN |
| 40 | 40 Amp TPN |
| 41 | Supplying and fibing of following rating double pole (Single pole & neutral) 240 volts resudual current circuit breaker (RCCB) having a sensivity current 30 miliampere in the existing MCB DB complete with connections testing & commissioning etc as required. |
| 42 | S.I.T.C. of following rating surface mounted LED Tube Lighting Fitting Suitable for 230V 50 Hz Single Phase Supply etc. complete as required. |
| 43 | 20/22 W LED Tube Light |
| 44 | SITC of 300 mm (12\\") Exhaust fan (Metal body) suitable for single phase 230 volts 50 Hz. AC supply complete with motor louvers/shutters etc. complete as required. Make-Usha/Crompton / Havells. |
| 45 | Supply Installation Testing & Commissioning of following sizes ceiling fan 3 Blades confirming to IS:374:2018 including wiring the down rods of standard (up to 30cm) with 1.5 sq.mm FR PVC insulated copper wire suitable for 230V 50 Hz Single phase supply etc. complete as required. Make - Usha/Crompton / Havells. |
| 46 | 1200 mm (48\\") BLDC 5 Star rating 32W Ceiling Fan |
| 47 | Supplying, fitting and fixing vitreous white glazed earthen ware I.W.C. of parry Hindustan or any other with complete job |
| 48 | Supplying fitting and foơng 40mm high vitreous white glazed earthen E.W.C. with 'p' trap of pery hindustan or any other approved 1.S.S. make including supplying and fixing 15 litres C.L mosquito proof low down flushing cistern of approved make with complete fittings with C.l.handle and R.S. or bracket with telescopic flush pipe with brass coupling and plumbers joints spindle stop of approved quality weight not less than 450grams 15mm P.V.C. alkathene pipe 45cm. long with brass coupling at both ends and white/black plastic solid state seal and lead of commandericuckoo or other 1.3.3. make with hinges or screws etc, painting pipe and cistem etc, with 2 coats of approved paint over a coat of red oxide priming, all complete as per specification and direction of E/L |
| 49 | Supplying fitting and fixing vitreous white glazed earthen ware wash hand basin of parry or Hindustan or any other I.S.S. approvad make supported on painted C.l. or R.S. brackets 32mm C.Lbrass waste, 15 mm dia C.L. body brass spindle stop cock of approved quality of weight not less than 350grams 32mm P.V.C. waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of EL |
| 50 | Providing and foxing white vitreous china laboratory sink with Cl brackets, C.P brass chain with rubber plug 40 mm C.P brass waste and 40 mm CP brass trap with necessary C.P brass unions complete including painting of fittings and brackets, cutting and making good the wall wherever required: |
| 51 | Providing and fixing white vitreous china flat back or wall comer type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. |
| 52 | Providing & fixing PVC waste pipe for sink including PVC waste fitting Complete |
| 53 | Providing and fixing C.P. brass bib cock of approved quality confirming to IS:8931 |
| 54 | Providing and foxing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. |
| 55 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS 8931 a) 15 mm nominal bore. |
| 56 | Providing and foxing tollet paper holder: |
| 57 | Providing and fixing uplasticised PVC connection pipe with brass unions: |
| 58 | Providing & fixing rain weter \\"Khurras' size 450x450 mm required depth with lead flashing around the pipe with one piece lead sheet of 3 mm thick set on a layer of cold bitumen, Including Heavy duty CMS grating as per drawing complete as required. |
| 59 | Supplying ficting and fixing H.C.L. pipes with sar of approved make confirming to LS.1. 1729 including supplying nails and bobins short pieces, cutting loose collars, lead and yam for making lead caulked joints, cutting pipes to size including earth work or scaffolding where necessary etc., all complete as par specification and direction of P |
| 60 | (b) 75 mm dla |
| 61 | (c) 50 mm dia |
| 62 | Supplying and fixing H.C.L. fittings of approved make confirming to 1.S. 1732 including supplying nails and bobines lead and yarn from making lead caulked joints including earth work or providing scaffolding as the case may be all complete as per specification and direction of E/1. |
| 63 | (B) H.G.I. Heal Rest bend (I) 100 mm dia (wt. 5.5 Kg. app.) |
| 64 | Supplying all tools and labours and cutting chajja. Cornice. for lavino H.C. pipes and making good the same as oer Specification and direction of EA |
| 65 | Cutting drain width wise above G.L. for laying H.C. pipe and restoring brick work in cement mortar (1:4) 12mm cement plaster in (1:4) with neat cement punning as per specification and direction |
| 66 | Making holes in walls for laying H.C.L pipes and restoring the same after pipe laying as per specification and direction of E/1. (a) 125mm dia |
| 67 | Supplying materials and labour for painting the exposed H.C. pipes and fittings with 2 coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/1. (a) 50 mm dia |
| 68 | (a) 80 mm dia |
| 69 | (a) 100 mm dia |
| 70 | Providing and fuong G.L. pipes complete with Gl fittings and clamps including cutting and making good the walls etc. (Exposed on well Terrace) |
| 71 | Providing and foxing CPVC pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including foxing the pipe with clamps at 1.00 mt spacing. this includes jionting of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the wall same including testing of joints complete as per the direction of engineer incharge Concealed work including cutting chases and making good the wall etc. |
| 72 | 20 mm nominal outer dia pipes |
| 73 | 25 mm nominal outer dia pipes |
| 74 | Providing and fixing of gun metal gate valve with Cl wheel of approved quality (screwed ends) 18,17.2 32 mm dia, nominal bore |
| 75 | Painting Gil pipes and fittings with two coats of anti corrosive bitumastic paint of approved quality 18.40.3 25 mm dia, nominal bore |
| 76 | Providing and fixing G.L. union in G.L. pipe including cutting and threading the pipe and making long screws etc, complete, 18.46.4 32mm nominal bore |
| 77 | Providing and fixing in position 25 mm diameter mosquito proof coupling of approved municipal design, |
| 78 | Constructing masonry Chamber 60x45x50 cm, inside with 75 class designation brick work in cement mortar 1:5 (1 cement:5 fine sand) for water meter complete with C.I. Doble flap surface box 400x200x200mm (Inside) with locking arrangement and RCC top slab 1:2:4 mix (1 cement: 2 corase sand: 4 graded stonr aggregate 20mm nominal size) necessary excavation foundation concret 1:5:10 (1 cement: 5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortor 1:3 (1 cement 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design, |
| 79 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank IS: 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet outlet and overflow pipes but withoud fittings and the hese support for tank |
| 80 | Supply & erection of ISI marked portable fire extinguishers, wall mounted type, wall brackets complete in all respect as per standard item with all accessories, delivery hose & nozzle whereever required, including fixing on walls as per the directions of Engineer-in-charge.Water CO2 gas nozzle type. 9 Lt.capacity (IS:15683) |
| 81 | Earthing with copper earth plate 600\text{mm} \times 600\text{mm} \times 3\text{mm} thick including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc (but without charcoal or coke and salt) complete as required. |
| 82 | Extra for using charcoal and salt for GI/Copper Plate earth electrode as required. |
| 83 | Providing and fixing 8 SWG copper wire at 0.50\text{ metre} below ground level for conductor earth electrode, including soldering etc. as required |
| 84 | Providing and fixing aluminium work for doors, windows, ventilatorsand partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved makeconforming to IS: 733 and IS: 1285, fixing with dash fasteners ofrequired dia and size, including necessary filling up the gaps atjunctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free,straight, mitred and jointed mechanically wherever required includingcleat angle, Aluminium snap beading for glazing / paneling, C.P.brass / stainless steel screws, all complete as per architecturaldrawings and the directions of Engineer-in-charge. (Glazing, panelingand dash fasteners to be paid for separately) :21.1.1 For fixed portion21.1.1.2 Powder coated aluminium (minimumthickness of powder coating 50 micron) @ 1.10 KG/SFT. |
| 85 | 21.3 Providing and fixing glazing in aluminium door, window, ventilatorshutters and partitions etc. with EPDM rubber / neoprene gasketetc. complete as per the architectural drawings and the directions ofengineer-in-charge . (Cost of aluminium snap beading shall be paidin basic item):21.3.1 With float glass panes of 4.0 mm thickness (weight notless than 10kg/sqm) |
| 86 | 9.84 Providing and fixing aluminium extruded section body tubular typeuniversal hydraulic door closer (having brand logo with ISi, IS : 3564,embossed on the body, door weight upto 36 kg to 80 kg and door widthfrom 701 mm to 1000 mm), with double speed adjustment with necessaryaccessories and screws etc.complete |
| 87 | 9.100 Providing and fixing aluminium handles, ISI marked, anodised (anodiccoating not less than grade AC 10 as per IS : 1868) transparent or dyedto required colour or shade, with necessary screws etc. complete :9.100.1 125 mm |
| 88 | Providing and fixing aluminium hanging floor door stopper, ISI marked,anodised (anodic coating not less than grade AC 10 as per IS : 1868)transparent or dyed to required colour and shade, with necessary screwsetc. complete.9.101.2 Twin rubber stopper |
| 89 | 9.101.2 Twin rubber stopper |
| 90 | Sand 10 km |
| 91 | Providing Sign Board L.S |
| 92 | Providing Name Board with glowing light |
| 93 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixingaccessories such as nuts, bolts, fasteners etc.). |
| 94 | ADD GST @18% |
| 95 | Add Labour Cess @1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysNov 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender