Tender For Boq For The Work - Reparing Of Toilet At Gaya Munda Complex Nagar Panchayat Khunti 2026-27
Tender Value
4.37 Lakhs
Estimated cost
Bid Submission
02 Nov 2026
5 days left
EMD
8743
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Khunti → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Boq For The Work - Reparing Of Toilet At Gaya Munda Complex Nagar Panchayat Khunti 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Taking down old door and window shutters including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. |
| 2 | Dismantling pucca brick or lime work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. |
| 3 | Dismantling plain cement or lime concrete work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. |
| 4 | Providing Designation 100A 112 mm thick reinforced B/Wwith Fly Ash Lime Brick (FALB) conforming to IS 12894-1990 (9\\"x4.5\\"x3\\") in cement mortar (1:4) in Superstructure with clean coarse sand of F.M. 2 to 2.5 including the cost of screening, raking out joints to 15 mm depth, curing, taxes and royalty all complete as per building specification and direction of E/l. |
| 5 | Providing and laying cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : ,….. 1:2:4(1cement:2coarse sand (zone- III):4 graded stone aggregate 40 mm nominal size) |
| 6 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : |
| 7 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., |
| 8 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 9 | Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge. |
| 10 | Providing 6mm thick cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5 |
| 11 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 12 | Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding, washing of floors and taxes all complete as per building specification and direction of E/l. |
| 13 | Wiring for light point/ fan point/exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single care cable in surface/ recessed PVC condult with modular switch modular plate suitable Gl box etc as required. |
| 14 | Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit as required |
| 15 | Supplying and foang following moduler switch socket on the existing madular plate & switch box including connections but excluding modular plate etc as required. |
| 16 | Installation testing and commissioning of pre wired fluorescent fitting / Compact fluorescent fitting off all type complete with all accessories and tute etc directly / wall including connection with 1.5 sq.mm FR PVC insulatted copper conductor single core cable and earthing etc. as required. |
| 17 | 20/22 W LED Tube Light |
| 18 | SITC of 300 mm (12\\") Exhaust fan (Metal body) suitable for single phase 230 volts 50 Hz. AC supply complete with motor louvers/shutters etc. complete as required. Make-Usha/Crompton / Havells. |
| 19 | Supplying, fitting and fixing vitreous white glazed earthen ware I.W.C. of parry Hindustan or any other with complete job |
| 20 | Supplying fitting and fixing vitreous white glazed earthen ware wash hand basin of parry or Hindustan or any other I.S.S. approvad make supported on painted C.l. or R.S. brackets 32mm C.Lbrass waste, 15 mm dia C.L. body brass spindle stop cock of approved quality of weight not less than 350grams 32mm P.V.C. waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of EL |
| 21 | Providing and fixing white vitreous china flat back or wall comer type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. |
| 22 | Providing & fixing PVC waste pipe for sink including PVC waste fitting Complete |
| 23 | Providing and fixing C.P. brass bib cock of approved quality confirming to IS:8931 |
| 24 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS 8931 a) 15 mm nominal bore. |
| 25 | Providing and fixing uplasticised PVC connection pipe with brass unions: |
| 26 | Providing & fixing rain weter \\"Khurras' size 450x450 mm required depth with lead flashing around the pipe with one piece lead sheet of 3 mm thick set on a layer of cold bitumen, Including Heavy duty CMS grating as per drawing complete as required. |
| 27 | Supplying ficting and fixing H.C.L. pipes with sar of approved make confirming to LS.1. 1729 including supplying nails and bobins short pieces, cutting loose collars, lead and yam for making lead caulked joints, cutting pipes to size including earth work or scaffolding where necessary etc., all complete as par specification and direction of P |
| 28 | (a) 100 mm dia |
| 29 | (b) 75 mm dla |
| 30 | (c) 50 mm dia |
| 31 | A) H.C.L single junction with door but without ear except socket (I) 100 mm dia (wt. 10.5 Kg. app.) |
| 32 | (B) H.G.I. Heal Rest bend (I) 100 mm dia (wt. 5.5 Kg. app.) |
| 33 | Supplying all tools and labours and cutting chajja. Cornice. for lavino H.C. pipes and making good the same as oer Specification and direction of EA |
| 34 | Cutting drain width wise above G.L. for laying H.C. pipe and restoring brick work in cement mortar (1:4) 12mm cement plaster in (1:4) with neat cement punning as per specification and direction |
| 35 | Making holes in walls for laying H.C.L pipes and restoring the same after pipe laying as per specification and direction of E/1. (a) 125mm dia |
| 36 | Supplying materials and labour for painting the exposed H.C. pipes and fittings with 2 coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/1. (a) 50 mm dia |
| 37 | (a) 80 mm dia |
| 38 | (a) 100 mm dia |
| 39 | Providing and fuong G.L. pipes complete with Gl fittings and clamps including cutting and making good the walls etc. (Exposed on well Terrace) |
| 40 | Providing and foxing CPVC pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including foxing the pipe with clamps at 1.00 mt spacing. this includes jionting of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the wall same including testing of joints complete as per the direction of engineer incharge Concealed work including cutting chases and making good the wall etc. |
| 41 | 20 mm nominal outer dia pipes |
| 42 | 25 mm nominal outer dia pipes |
| 43 | Providing and fixing of gun metal gate valve with Cl wheel of approved quality (screwed ends) 18,17.2 32 mm dia, nominal bore |
| 44 | Painting Gil pipes and fittings with two coats of anti corrosive bitumastic paint of approved quality 18.40.3 25 mm dia, nominal bore |
| 45 | Providing and fixing G.L. union in G.L. pipe including cutting and threading the pipe and making long screws etc, complete, 18.46.4 32mm nominal bore |
| 46 | SAND(10 km radius) |
| 47 | Bricks(18 Km radius) |
| 48 | AGGREGATE(20 KM ) |
| 49 | ADD GST @18% |
| 50 | Add Labour Cess @1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysNov 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender