Tender For Construction Of Community Sanitary Complex Near Masjid Shareef Hergam Block Banihal Under Sbm-G(Phase-Ii)Nit No:- 64 Of Rew Ramban 2026-27
Tender Value
2.97 Lakhs
Estimated cost
Bid Submission
02 Nov 2026
3 days left
EMD
5940
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Doda → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Community Sanitary Complex Near Masjid Shareef Hergam Block Banihal Under Sbm-G(Phase-Ii)Nit No:- 64 Of Rew Ramban 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed in all kinds of soils. |
| 2 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) with 30% boulders |
| 4 | Providing and laying dry stone soling handpacked in foundation and trenches including all carriages complete |
| 5 | Brickworkwith common burnt clay bricks of class designation 75 in cement moratr 1:6 (1 cement: 6 coarse sand) in foundation and plinth |
| 6 | Extra for brickwork above plinth level upto floor v |
| 7 | Providing and laying in position Reinforced cement concrete in beams, cantilevers, suspended floors, roofs etc. etc. all work above plinth upto floor V level of specified grade including curing but excluding the cost of centring and shuttering in 1:1.5:3 (1 cement :1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 8 | Steel Reinforcement for RCC work including cutting, bending, binding and placing in position all complete (TMT bars of Fe500 Grade) |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form work for:foundations ,footings bases, roofs, walls, floors etc. |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form work for:suspended floors, roofs etc. |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form work for:Edges of Slabs etc |
| 12 | Dry random rubble masonay with hard stone in foundation and plinth using quarry stone including carriages |
| 13 | Providing and fixing structural steel door/windows frames,shutterrs complete job including priming and painting incl tower bolts |
| 14 | Providing and fixing colored CGI sheets for doors complete job |
| 15 | Providing and fixing 1st quality Ceramic Glazed Wall/Floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:3 (1cement :3 coarse sand) including grouting the joints with white cement and matching pigments. |
| 16 | 12mm thick cement plaster of mix 1:4 (1 cement: 4 fine sand) |
| 17 | Finishing walls with water proofing cement paint of required shade on new work |
| 18 | Providing and fixing 3 layer PPR pipes conforming to IS 15801 UV stablized and anti microbial fusion welded |
| 19 | Providing and fixing door Tee 100mm dia |
| 20 | Providing and fixing brass Bib cock of approved quality and colour 15mm dia of standard brand |
| 21 | Providing and fixing brass angle valve of approved quality |
| 22 | Providing and fixing gun metal gate valve 20mm nominal bore of approved quality |
| 23 | Providing and fixing PTMT soap dish holder of approved quality |
| 24 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls andfloors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 25 | Providing and placing on terrace (at all floors) polyethylene waterstoragetank ISI:12701 marked of 1000ltrs capacity water tank including making the inlet/outlet/overflow holes and suitable locking arrangment as per the directions of the Engineer-In-charge with all fittings complete |
| 26 | Providing and fixing soil waste and vent pipes IS 13592 and fittings suitable to rubber ring joints 110mm dia |
| 27 | Providing and fixing soil waste and vent pipes IS 13592 and fittings suitable to rubber ring joints 75mm dia |
| 28 | Providing and fixing cowel over vent pipes of approved quality type B |
| 29 | Providing and fixing 100x75mm reducer PVC of approved quality |
| 30 | Providing and fixing of floor traps 110mm with double chrome plated cover 1 grated and one closed |
| 31 | Providing and fixing wash basin with CI brackest 15mm CP brass pillar taps 32mm,CP brass waste of standard pattern inlc painting of fittings etc |
| 32 | Providing and fixing of mirror of superior glass and of required shape and size |
| 33 | Carriage of Sand from source to site by mechanical transport or animal transport or by head load |
| 34 | Carriage of Aggregates from source to site by mechanical transport or animal transport or by head load |
| 35 | Carriage of Bricks from source to site by mechanical transport or animal transport or by head load |
| 36 | Providing/Fixing of Citizen information board (complete job) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysNov 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender