Tender For Providing Of New Borewell With Motor Pump, Gas Cylinder Pipe Connection Facility And Other Works At Arignar Anna Mandapam Ward No.19 In Madhuranthagam Municipality
Tender Value
5.70 Lakhs
Estimated cost
Bid Submission
13 Nov 2026
16 days left
EMD
5700
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chengalpattu → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Of New Borewell With Motor Pump, Gas Cylinder Pipe Connection Facility And Other Works At Arignar Anna Mandapam Ward No.19 In Madhuranthagam Municipality
BOQ
| Sl. No. | Item Description |
| 1 | Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap / Swan neck tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works) |
| 2 | Supplying and fixing position CI Nahani Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of crushed stone sandand five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works) |
| 3 | Painting new wood work with two finishing coats of synthetic enamel ready mixed paint of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 4 | Supplyand fixing of 20AFlush typeWall Socket 32ADP MCB complete set forAC Plug in flush with wall with earth connection (For AC Plug) |
| 5 | Supply and fixing of 450 mm (18\\") sweep (light duty) Ac exhaust fan complete with necessary wall opening and making good of the wall including Loading and Unloading Labour Charges etc., |
| 6 | Conducting Geophysical survey, quality and quantity test and transportation charges etc, (This includes labour charges in the field, rent of the vehicle for reaching the place, rent of the instrument and excluding charges for the geologist) |
| 7 | Drilling of borewells of size 4\\" to 5\\" dia. in sedimentary formation using hand boresets including insertion of casing pipes and removal of casing pipes etc., including collection of samples as directed by the TWAD Board Officers. |
| 8 | Supplying and delivery of Special Plain Blue 150mm Casing Pipes for Bore Wells. The rate including cost and conveyance of materials. Complete |
| 9 | Labour Charges for inserting 150 mm PVC Casing pipes assembly (with slots or without slots) in the drilled hole including jointing the pipes with PVC Couplers with Cement paste etc., complete, supply and packing the annular space with pebbles of size and quality as approved by the executive engineers of TWAD Board |
| 10 | Supply and delivery of 1HP single phase wet type submersible pump set confirm to I.S. 8034 with ISI marking as per specification. The Motor fitted with pump should be suitable for insulation in 150mm dia bore well discharge of pump 20 LPM and head 80mts etc. complete as per standard specification. 20 X 70 |
| 11 | Supply and delivery of HDPE PIPES FOR SUB-MERSIBLE PUMP IN BORE WELL Class-5 (1 MPa or 10 kg./cm2 pressure) including cost of conveyance of all materials and transport charge etc complete.32 mm Pipe |
| 12 | Supply and delivery of PVC and GI specials including cost of conveyance all materials and transport charges etc. complete |
| 13 | 80mm MS clamp |
| 14 | 160mm End Cap |
| 15 | 32mm GI adopter |
| 16 | 32mm GI pipe Nipple |
| 17 | 32mm GI Elbow |
| 18 | 32mm Flange Set |
| 19 | 32mm GI Hex Nipple |
| 20 | Nylone Rope |
| 21 | 32mm GI Pipe |
| 22 | 32mm GI Non Return Value |
| 23 | Supply and delivery of 2.5 Sq.mm Submersible PVC insulated and sheathed 3 core Flat type copper cable confirming to is 694/1990 ISI Mark etc. completed as per standard specification. |
| 24 | Supply and delivery of MS Kiosk of size 0.75m x 0.45m x 0.75m made up of MS angle of size 50mm x 50mmx 4mm alround covered with 16 gauge MS sheet and kiosk door made up of MS plates of size 25 mm x 3 mm including cutting, welding, grinding, locking arrangements and labour charges etc., |
| 25 | Labour charges for the erection of 1 HP submersible pump set in bore well including fixing and jointing and submersible cable with proper clamps up to the starter to the required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauge up to the exterior wall of the pump room and erection of panel board consisting of TPCIN switch starter, voltmeter, Ammeter 3 pilot (indicating) lamps, capacitor, single phasing prevented water level guard and laying and jointing the cable and twin earthing as per I.E. rules etc. complete and testing pump sets and trial run for 7 days. |
| 26 | Supply and delivery of Single Phase Panel Board as direct online starter confirming to IS13947, IEC60947-1 and as amended thereafter with suitable KW rating for operation in AC/single Phase/50HZ(± 5%) and 230 V(±10%) including Ammeter, Voltmeter, Thermal Overload relay, 16 Amps 2 pole Magnetic Contactor with under Voltage protection, Indication lamp, starting capacitor, running capacitor and On/Off Push button switches, 5 way connector, wiring with 1 sq. mm/1.5 sq. mm copper PVC insulated cable, powder coated vermin proof box including the capacitor (the cost of capacitor is to be taken separately) |
| 27 | Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V on 7 / 20 GI bearer wire for service connection mains SD-65 |
| 28 | Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in 25mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron upright and end supports for mains SD-70 |
| 29 | Earthing as per the ISI specification with an earth electrode of 2.10metre Class'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mmx50mmx6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry SD211 |
| 30 | Providing for Cleaning work such as Table, Chair and Toilet Area Including Labour Charges etc., |
| 31 | Providing for False Ceilling Lights Including Loading and Unloading Labour Charges etc., |
| 32 | Supplying and fixing Mild Steel grills for windows, ventilators etc.,complete complying with standard specifications and as directed by the departmental officers. |
| 33 | Supply and Delivery of Gas Line Including Loading and Unloading Labour Charges etc., |
| 34 | Supply and fixing of 125A Four Pole MCB Including Loading and Unloading Labour Charges etc., |
| 35 | Supply and Delivery of Service Connection Accessories L.T 1100V PVC Aluminium Armoures Under Ground Cable With ISI Mark 31/2 core 50 sq.mm. PVC Armoured UG Cable |
| 36 | Wiring with 2x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor cable of 1100Vgrade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch with painting of suitable colour with continuous earth wire connection of 1.5sq.mm copper wire for open PVC light point/fan point (for electronic regulator) SD-16 |
| 37 | Wiring with 2x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor cable of 1100Vgrade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessorie swith 150 mm x 100 mm x 75 mm MS switch box for 5A3 pin non interlocking flush type CS plug wfth painting of suitable colour with continuous earth wire connection of 1.5 sq.mm copper wire for open plug point SD-10 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysNov 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender