Tender For Providing And Laying Of Cement Concrete Interlocking Paver Block On Road Surface From Pwd Road Near Sadhan Saha House To Nabi Miah House At Ward No. 07 Under Melaghar Municipal Council During The Year 2026-27. Sub Head: Paver Block Road, R
Tender Overview
Project Description
Tender for Providing And Laying Of Cement Concrete Interlocking Paver Block On Road Surface From Pwd Road Near Sadhan Saha House To Nabi Miah House At Ward No. 07 Under Melaghar Municipal Council During The Year 2026-27. Sub Head: Paver Block Road, Roadside Wall & Roadside Retaining Wall.
BOQ
| Sl. No. | Item Description |
| 1 | Grade Providing and laying factory made chamfered edge Cement Concrete paver blocks of required strength, thickness & size/ shape, made by table vibratory method to attain superior smooth finish using PU or equivalent moulds, laid in required grey colour & pattern over 50 mm thick compacted bed of sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in footpath, parks, lawns, drive ways or light traffic parking etc. all complete as per specifications & approval/ direction of the Engineer -in-Charge:(a) 80 mm thick c.c. paver block of M-30 grade with approved colour, design and pattern. |
| 2 | Providing and laying flat brick soling layer on prepared subgrade according to lines, grades and cross-section shown on the drawing, filling joints with Earth, free from clay with a Plasticity Index not exceeding 6, watering and rolling the same with three wheeled road roller 80-100 KN as per MoRD Technical Specification Clause 412. |
| 3 | Water Bound Macadam Sub-Base / Base using Jhama Brick Aggragate 2)WBM Grading - 3 Providing, laying, spreading and compacting jhama brick aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing rolling with three wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density Grading- 3 as per MoRD Technical Specification Clause 405. |
| 4 | Excavation for Structures A. Without dewatering. Earthwork in excavation for structures as per drawing and MoRD technical specifications Clause 305.1 including setting out, construction of shoring & bracing, removal of stumps & other deleterious material and disposal upto a lead of 50 m, dressing of sides & bottom and backfilling in trenches with excavated suitable material. I. Ordinary soil (i) Upto 3 m depth |
| 5 | Filling in foundation trenches as per drawing & MoRD technical specification clause 305.3.9,1200 sand filling |
| 6 | Providing concrete for plain concrete(using jhama brick & agreegate) in open foundations complete including formwork as per drawings & MoRD technical specifications Clauses 802, 803, 900, 1202 and 1203. (including centering, shuttering, staging etc. but excluding reinforcement). (ii)Nominal mix 1:3.6 (Hand mixing) |
| 7 | Supplying, fitting & placing Thermo-Mechanically treated bar/ Cold twisted deformed steel bar reinforcement in foundation complete as per drawings & MoRD technical specifications Clauses 1002,1005,1010 & 1202 |
| 8 | Plain/reinforced cement concrete in substructure complete including formwork as per drawings & MoRD technical specifications Clauses 802, 804, 805,806,807,900,1202 & 1204. (including centering, shuttering, staging etc. But excluding reinforcement). |
| 9 | Filling in foundation trenches as per drawing & MoRD technical specification clause 305.3.9,1200 Earth filling |
| 10 | 1200 Providing & laying filter media with jhama brick aggregates as per specification to a thickness of not less than 600 mm with smaller size towards the soil & bigger size towards the wall & providing over the entire surface behind abutment, wing wall, return wall to the full height, compacted to firm condition complete as per drawing and MoRD technical specification clause 1204.3.8. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender