Tender For Construction Of 4 Nos F Type Qtr. (Lfa Staff ) At Phulbani (First Floor) Buildings.
Tender Value
51.73 Lakhs
Estimated cost
Bid Submission
10 Nov 2026
12 days left
EMD
51800
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kandhamal → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of 4 Nos F Type Qtr. (Lfa Staff ) At Phulbani (First Floor) Buildings.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling brick or stone masonry in lime or cement mortar under 3m. Height including stacking the useful materials for reuse and removing the debris within 50m lead. |
| 2 | Dismantling and removing R.C.C. slab, column, beam and landing including stacking the useful materials for reuse and removing the debris with in 50m lead. |
| 3 | Dismantling G.C.I. or A.C sheet roofing after carefully removing the bolts and nuts including stacking of he materials for reuse and removing the debris with in 50m lead. |
| 4 | Providing, lifting, hoisting and laying Reinforced cement concrete of M-20 grade in following items as per approved designs and drawings having a minimum compressive strength (in work test) 200 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 10 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position. (a) Column |
| 5 | (b) Lintel |
| 6 | (c ) Wall Beam |
| 7 | (d) Roof Slab |
| 8 | (e ) Chajja |
| 9 | (f) Stair Case |
| 10 | (g) Shalve |
| 11 | Supplying and Straightening bent up or coiled rods, cutting, bending, crancking hooking welding or jointing (if required) the Tor Steel of SAIL/RINL/TATA/JINDAL/SHYAM STEEL make with binding wires and binding tying the grills, hoisting, lowering & placing in proper position as required for all types of R.C.C. works including cost, conveyance of steel and binsding wire of of 18 to 20 gauge and labour with T & P required for the work etc. complete in all floors (weight of binding wires will not be considered for payment , and payment will be made on weight of Tor Steel Only. |
| 12 | Providing Fly Ash brick masonry work in Superstructure using (250mm x 120mm x 80mm ) size having crushing strength not less than 75Kg / Sqcm in cement mortar (1:6) for brick masonry walls after immersing the bricks for minimum 6 hours in water before use with all necessary projections, splays cutting, circular moulding, corbelling etc as per drawings including cost, conveyance, all royalties, loading and unloading of all materials and all labour for work including scaffolding, watering and curing, sundries, T&P etc. complete as per the direction of the Engineer-in-charge. |
| 13 | Providing 16mm thick cement plaster to the surface of brick masonry wall in cement mortar (1:6) including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats only to proper plumbs and level and making grooves, beads and drip coarse to give required ornamental finish as per drawings including cost of all materials, conveyance,Royality, loading and unloading, all labour, scaffolding, watering and curing, sundries and T&P etc. complete as per direction of the Engineer-in-charge. |
| 14 | Providing 12mm thick cement plaster to the surface of brick masonry wall in cement mortar (1:6) including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats only to proper plumbs and level and making grooves, beads and drip coarse to give required ornamental finish as per drawings including cost of all materials, conveyance, Royality,loading and unloading, all labour, scaffolding, watering and curing, sundries and T&P etc. complete as per direction of the Engineer-in-charge. |
| 15 | Providing and fixing 65mm x 125mm factory made single exiruded WPC ( Wood polymer Composite) solid door /window/ceosetory windows & other Frames/chowkhat comprising of virgin PVC polymer of K. Value 58-60 (Suspension Grade) calcium carbornate and natural fibers ( wood powder/ rice husk/ wheat husk) and non toxic additives ( maximum toxicity indes of 12 for 100gms) fabricated with miter joint after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame derisity of 750kg/cum, screw withdrawat strength of 2200 N ( face) & 1100 N (Edge) minimum compressive strength of 58 N/mm2 modulars of elasicity 900 N/mm2 and resistance to spread of frame of Class A category with property of bering temite / dorer proof water/moisture proof and fire retardent and fixed in position with M.S hold fast/ugs/SS dash fasteriers of required dia and length complete as per direction of Engineer-in-charge ( Make WPC Door frame: Century/Black Cobra/Rajshri Plastwooe, colour-coflles Brown) |
| 16 | Providing and fixing 30mm thick Flush Door Shutters conforming to IS-2002 (Part-1) decorative type, core of block board construction with frme of 1st class hard wood and well matched teak 3 Ply veneering with vertical grains or cross bands and face veneers on both face of shuttters inclusive of 4 Nos. of Stanless steel Butt Hinges (100mmx60mmx2.5mm) 40mm stinless steel screws, Cylindrical Lock (Godrej-9843), Tower Bolt SS 10x300 mm (Bathroom)(Godrej 3264), PVC Door Buffer with SS Screw, teak wood lippping around the edges & paste with 1.5mm thick laminate on both side of the flush door etc.including the cost of all mateials hard ware fitings cost of all labour , Conveyance, loading, unloading T&P etc complete as per the direction of Engineer-in-charge. |
| 17 | Supplying of M.S. Grill/shutter of approved quality and design to windows and openings & stair case railing and parapet railings etc. including making holes in walls and RCC structures or wood work etc. in proper position making good the damages of walls or RCC or other structures complete including mending or cutting sizes or grooves in choukaths with cost and conveyance of all materials, labour with T&P required for the work and royalties etc. complete ( including screws) in all respect in all floors. as diredted by E.I.C |
| 18 | Labour for fitting and fixing MS window grills, gate etc complete |
| 19 | Supplying, fitting & fixing of Vitrified colour printed series tiles in floors of size 600mmx 600mm of approved make confirming to IS:13755 laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge (for New Work only ) |
| 20 | Providing fixing of Vetrified tiles in dadoes over 12mm thick cp in cm (1:3) including with all cost, conveyance, royalties,with labour and T&P required for the work etc complete in all respect. |
| 21 | Providing fixing and fitting Granite tiles flooring in floors or Treads in 25mm thick Bed of CM (1:1) of 10 mm thick and area above 0.1 sqm to 0.4 sqm jointing with neat and cement slushy mixed with pigment to match the shade of the tiles etc complete with cost,conveyance, Royalities,Taxes of all materials usedr the work,all labour T&P etc in all respects (Agrt. Item No. 18) |
| 22 | Finishing plastered surface with wall cement based wall putty (wate based) to receive primer etc including cost, conveyances, of wall cement putty & all materials and cost of all labour with T&P etc, complete as per specification & direction of Engineer-in-charge. (Agrt. Item No. 22) |
| 23 | wall painting two coat with P.E paint over a coat of primer including cost conveyance P.E Paint and all materials labour & T&P require for the work etc. complete as directed by E.I.C.(Agrt. Item No. 24) |
| 24 | Painting 2 (two) coats with any approved colour weather coat over a coat of primer to out side surface of wall of approved shade and quality etc including all cost of weather coat, conveyance, , all labour T&P etc complete as per direction of Engineer -in- charge. (a) Ground Floor |
| 25 | (b) First Floor |
| 26 | Painting two coat with enamel paint over a coat of priming over including cost conveyance anamel Paint,Primer and all materials, labour & T&P require for the work etc. complete as directed by E.I.C. (Agrt. Item No. 25) |
| 27 | Supplyin fitting and fixing steel of 304 grade in hand railling using 50mm dia of 2mm thick circular pipe with balustrade of size 32mm x 32mm x 2mm @0.90 mtr C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved disign . including conveyance of all materials and royalties etc with all labour and T&P required for the work complete including side shuttering.as directed by E.I.C. (Agrt. Item No. 26) |
| 28 | 2.5 cm thick grading concrete (1:2:2) on roof slab with 6.7mm & down grades size hard granite crusher broken chips on new work including cost, conveyance,Royality, of all materials, labour and T&P required for the work etc. complete as directed by the EIC. |
| 29 | Earth work in excavation in hard soil or gravelly soil within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per the direction of the Engineer in Charge. |
| 30 | Filling foundation and plinth with Sand including watering and ramming as per approved drawing and technical specifications as per Section 2100 of MoRT&H Specifications for Road & Bridge works (4th Revision). |
| 31 | Plain cement concrete (1:3:6) nominal mix with 4cm size Hard granite metal in foundation as per Drawing and Technical Specification |
| 32 | Plain cement concrete (1:2:4) nominal mix with 12mm size hard broken granite chips in foundation as per Drawing and Technical Specification |
| 33 | Supplying, fitting and fixing of Tata make( Durashine) colour tin sheet or equivalent, heat resistant , specially colour coated Sheet for roofing including cost, conveyance of all materials, labour and T&P require for the work etc. complete as directed by E.I.C. |
| 34 | Carriage of dismentaling items 5km lead etc complete. |
| 35 | Head RoomProviding, lifting, hoisting and laying Reinforced cement concrete of M-20 grade in following items as per approved designs and drawings having a minimum compressive strength (in work test) 200 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 10 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position. (a) Column |
| 36 | Lintel |
| 37 | Wall Beam |
| 38 | Roof Slab |
| 39 | Chajja |
| 40 | Supplying and Straightening bent up or coiled rods, cutting, bending, crancking hooking welding or jointing (if required) the Tor Steel of SAIL/RINL/TATA/JINDAL/SHYAM STEEL make with binding wires and binding tying the grills, hoisting, lowering & placing in proper position as required for all types of R.C.C. works including cost, conveyance of steel and binsding wire of of 18 to 20 gauge and labour with T & P required for the work etc. complete in all floors (weight of binding wires will not be considered for payment , and payment will be made on weight of Tor Steel Only. |
| 41 | Providing Fly Ash brick masonry work in Superstructure using (250mm x 120mm x 80mm ) size having crushing strength not less than 75Kg / Sqcm in cement mortar (1:6) for brick masonry walls after immersing the bricks for minimum 6 hours in water before use with all necessary projections, splays cutting, circular moulding, corbelling etc as per drawings including cost, conveyance, all royalties, loading and unloading of all materials and all labour for work including scaffolding, watering and curing, sundries, T&P etc. complete as per the direction of the Engineer-in-charge. |
| 42 | Providing 16mm thick cement plaster to the surface of brick masonry wall in cement mortar (1:6) including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats only to proper plumbs and level and making grooves, beads and drip coarse to give required ornamental finish as per drawings including cost of all materials, conveyance,Royality, loading and unloading, all labour, scaffolding, watering and curing, sundries and T&P etc. complete as per direction of the Engineer-in-charge. (Agrt. Item No. 9) |
| 43 | Providing 12mm thick cement plaster to the surface of brick masonry wall in cement mortar (1:6) including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats only to proper plumbs and level and making grooves, beads and drip coarse to give required ornamental finish as per drawings including cost of all materials, conveyance, Royality,loading and unloading, all labour, scaffolding, watering and curing, sundries and T&P etc. complete as per direction of the Engineer-in-charge. (Agrt. Item No. 10) |
| 44 | Supplying of M.S. Grill/shutter of approved quality and design to windows and openings & stair case railing and parapet railings etc. including making holes in walls and RCC structures or wood work etc. in proper position making good the damages of walls or RCC or other structures complete including mending or cutting sizes or grooves in choukaths with cost and conveyance of all materials, labour with T&P required for the work and royalties etc. complete ( including screws) in all respect in all floors. as diredted by E.I.C (Agrt. Item No. 14) |
| 45 | Finishing plastered surface with wall cement based wall putty (wate based) to receive primer etc including cost, conveyances, of wall cement putty & all materials and cost of all labour with T&P etc, complete as per specification & direction of Engineer-in-charge. (Agrt. Item No. 22) |
| 46 | wall painting two coat with P.E paint over a coat of primer including cost conveyance P.E Paint and all materials labour & T&P require for the work etc. complete as directed by E.I.C.(Agrt. Item No. 24) |
| 47 | Painting 2 (two) coats with any approved colour weather coat over a coat of primer to out side surface of wall of approved shade and quality etc including all cost of weather coat, conveyance, , all labour T&P etc complete as per direction of Engineer -in- charge. |
| 48 | Painting two coat with enamel paint over a coat of priming over including cost conveyance anamel Paint,Primer and all materials, labour & T&P require for the work etc. complete as directed by E.I.C. (Agrt. Item No. 25) |
| 49 | 2.5 cm thick grading concrete (1:2:2) on roof slab with 6.7mm & down grades size hard granite crusher broken chips on new work including cost, conveyance,Royality, of all materials, labour and T&P required for the work etc. complete as directed by the EIC. |
| 50 | Supply fitting fixing of 100mm dia PVC rain water pipe including all cost, of all materials all labour T&P etc complete. |
| 51 | PH Works. Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor GI/PVC pipes, class-IV (10 k.g. F/cm) on firming I.S.4985 of the following nominal bore, tube fittings and clamps including making good the wall, ceiling and floor, testing all complete as per specification and direction of the Engineer in charge. First Floor (i) 20mm dia cPVC pipe (Ori Plast/Finolex/Supreme Make) |
| 52 | (ii) 25mm dia uPVC pipe (sch-80) (Ori Plast/Finolex/Supreme Make) |
| 53 | Second Floor(i) 32mm dia uPVC pipe (sch-80) (Ori Plast/Finolex/Supreme Make) |
| 54 | (ii) 40mm dia uPVC pipe (sch-80) (Ori Plast/Finolex/Supreme Make) |
| 55 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials including cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.(i) 15mm dia CP angle stop cock (Jaquar)CON-CHR-059KN |
| 56 | (ii) 15mm dia CP two way bib cock (Jaquar)CON-041KN |
| 57 | (iii) 15mm dia CP long body bib cock (Jaquar Make)CON-107KN |
| 58 | (iv) 20mm dia Brass FW Valve |
| 59 | (v) 25mm dia Brass FW Valve |
| 60 | (vi) 32mm dia Brass FW Valve |
| 61 | (vii) 25mm dia CP Health Faucet (Jaquar Make)ALD - CHR - 565 |
| 62 | (viii) CP Extension Piece |
| 63 | (ix) 125mm CP Grating |
| 64 | (x) C.P. Flange |
| 65 | Supplying all materials , labour, T&P and fixing rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr width KB brickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxes etc.all complete as per approved drawing , P.H. specification and direction of Engineer-in-charge.2000 liters capacity PVC water storage tank at roof First floor (Sintex/ Supreme/ Ashirvad) make |
| 66 | supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per direction of Engineer-in-charge. |
| 67 | Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proof as per P.H. specification and direction of Engineer-in-charge |
| 68 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages including watering , curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge. |
| 69 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. 110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B) |
| 70 | 110mm U-PVC P Trap(Ori Plast/Finolex/Supreme Make) |
| 71 | 110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make) |
| 72 | 110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make) |
| 73 | 110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make) |
| 74 | 110mm U-PVC Door tee(Ori Plast/Finolex/Supreme Make) |
| 75 | 110mm U-PVC Socket plain (Ori Plast/Finolex/Supreme Make) |
| 76 | Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make ) |
| 77 | Supplying all materials, labour, T&P and fixing vitreous china water closet,European wc) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI 'p' or 's' trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages , cost & conveyance of all materials to worksite, payment of royality , taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.European water closet (Hindware/Parryware/Neycer make) |
| 78 | Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge550mmx400mm W.H.basin (Jaquar/ Johnson/perryware make)with 15mm dia C.P. pillar cock |
| 79 | Supplying all materials, labour, T&P for fitting & fixing plain edge kitchen sink of all standard sizes with a pair of bracket, C.P. waste, trap, PVC waste pipe and painting brackets including supply of cement concrete, mortar etc all complete as per instruction of Engineer-in-charge. 24\\" x 16\\" x 10\\" Sink with Sink Cock/Bib Cock jayna make (Hindware/Cera/Johnson make) |
| 80 | Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in chargeCP towel rail (/Jaquar/Plaza/ Johnson Make) |
| 81 | Towel ring (/Jaquar/Plaza/ Johnson Make) |
| 82 | Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge.600mmx125mm plate glass shelf |
| 83 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge.BE Mirror Wallmount (Best quality) |
| 84 | Supplying all materials labor T&P & Fitting & fixing CP shower with rim with supply of red lead and yarn nail complete as per direction of Engineer in charge.½ inch x 5 inch CP Shower (Jaquar) |
| 85 | Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in chargeCP soap holder |
| 86 | Supplying all materials, labour, T&P and providing and fixing ceramic tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size 60cmx60cm special printed series to be pre-approved by the Engineer-in-charge )(Kajaria Delphi crema mat/Johnson SLP mat/SomaniTile 60cm x60cm) first floor |
| 87 | Supplying all materials, labour, T&P and providing and fixing porcelain glazed tiles in dado skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size 25cmx33cm special plain / printed series to be pre-approved by the Engineer-in-charge )Kajaria Manmol crema/Johnson Unitas LT/Somani Azzaro Crema (60cm x60cm)First Floor |
| 88 | Supplying & fitting fixing of unplasticised Poly vinly chloride (UPVC ) (FENESTA/ NCL/ VEKA LTD) Casement Door series dully manufactured using UPVC reinforced profile of 60mmx55mmx2.5mm for outer frame 102mmx60mmx2.5mm 2.13*0.75*85 |
| 89 | Supplying all materials, labour, T&P and providing cement concrete ( 1:4:8 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge |
| 90 | Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge |
| 91 | EI WorksRecessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor of ISI marked Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI/V-Guard with 20 mm dia HMS FRLS PVC conduit ISI marked Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal 6A modular type ( anti-bactorial and flame retradant type) switch ISI marked Make-Schneider(Zencelo)/legrand( Myrius-Next gen) /Panasonic (vision) and ceiling rose ISI marked of modular type G.I box with metallic cover plate (both side) ( anti-bactorial and flame retradant type) Make-Schneider(Zencelo)/legrand( Myrius-Next gen) /Panasonic (vision) of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. . All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials.Group- A |
| 92 | Group-B. |
| 93 | Group-C. |
| 94 | Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch & socket (modular type)( (anti-bactorial and flame retradant type)) & other required accessories of ISI marked as approved as per direction of Engg. -in -Charge. Make-Schneider(Zencelo)/legrand( Myrius-Next gen) /Panasonic (vision) .(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 95 | Supplying,fixing of 1x16A Plug on the separate board with complete fitting by 01 no of 16A switch & socket(modular type)(( anti-bactorial and flame retradant type)) with suitable size modular box & cover( anti-bactorial and flame retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge.. Make-Schneider(Zencelo)/legrand( Myrius-Next gen)/Panasonic (vision) (For equipement power)(Make :Legrand(Myrius-Next gen)/-Schneider(Zencelo)/PANASONIC(VISION) |
| 96 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing two 3 pin 5/6 A modular socket outlet and two 5/6 A modular switch, connections etc. as required.(separate) |
| 97 | Recessed wiring to submain in the following sq.mm FRLS PVC insulated single core multistrand copper conductor of ISI marked conforming to IS-694/1990 in the following mm dia non-metalic heavy duty flexible conduit 1.6mm thick along with the following sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as required. (Make of wire Finolex / KEI/ Polycab/ L&T/ Anchor)a) 2x1.5mm2 + 1x1.5mm2. in 20mm dia |
| 98 | b) 2x2.5mm2 + 1x1.5mm2. in 20mm dia |
| 99 | c) 2x2.5mm2 + 1x1.5mm2. in 20mm dia |
| 100 | d) 2x4mm2 + 1x1.5mm2 in 20mm dia |
| 101 | e) 2x6 Sq.mm.+ 1x2.5 Sq.mm. in 25mm dia |
| 102 | Supplying and fixing of following mentioned way, three pole/single pole and neutral, sheet steel,double door MCB distribution board, 415 volts/240 volts shall be as per IEC 61439-3,integrated door earthing system offering additional safety to the user,High quality polyurethane Gasket,the box and cover shall be fabricated to withstand IK09,the DB should be properly pre-treated with 7 tank process and duly powder coated, phosphatized with powder coated finish, on surface/recess, complete with terminal blocks,with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9/ABB ITUS as per direction of Engg.-in-Charge. The Distribution boards should be Replacement Warranty will be 3 years.a) 2+4 way MCB Enclosure DB (GLAZED door)(only each EM. CONNECTION UPS LOAD)Warranty on DB is 3 years |
| 103 | b) 12way double door SPN with 3 year warranty |
| 104 | Supply and fixing of 5amp to 32 amp rating 240V \\"C\\" series miniature circuit breaker suitable for lighting and other loads of the following poles in t he existing MCB DB ISI marked complete with connections testing and commissioning etc. as required. (Make- Legrand/ L&T/ Schneider)a) 6Amp rating to 32Amp (SP) MCB |
| 105 | b) 32Amp (DP) MCB |
| 106 | c) 40 Amp (DP) MCB |
| 107 | d) 40Amp (DP) RCCB 30 mA |
| 108 | supplying and fixing of call bell / buzzer ISI marked suitable for DC / AC single phase 230 volts complete as required. |
| 109 | Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour BLDC ceiling fan with aluminium blades having wattage not more than 28W and air delivery greater than equal to 215m3/min Make-Crompton Energion Groove /Havells Efficiencia Neo/Usha Technix ) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge,Replacement Warranty will be 4 years.. .(With fan Regulator) |
| 110 | Installation, Testing & Commissioning of Modular type 5 step ceiling fan regulator, In existing Swicth box including connection with 1.5sq.mm FR PVC insulated single core multistrand copper conductor, earthing the regulator as required. (Make Anchor- Roma Urban/ Legrand myrius/ Schneider opale/ Crabtree Athena/ L&T Engleze.) |
| 111 | S/F. Of 300mm Exhaust fan (Anti-Dust) (Make Usha / Khaitan). |
| 112 | S/F. of 1x18Wt. LED tube light fiting (Philips / Panasonic / Havels) make. |
| 113 | S/F of Bakelite angle holder/ batten holder (Make Anchor/ Cona). |
| 114 | S/F. of 9 Wt. LED bulb (Philips / Panasonic / Havels) make. |
| 115 | Supplying, Erection, Fixing, connection & testing of LED BOUNDRY WALL Light of elegant look (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj) 35 W LED street light having die cast aluminium housing with toughened glass having lumen efficacy of 110 lm/w or more (As per LM 79 report of third party NABL lab) ,IP 65 protection or more , LED street light model having warrantied for a period of 5 years . The luminaire should be supplied along with bracket maintenance free for inspection as required as per direction of Engg.-in-Charge. |
| 116 | SITC of Sleek LED 10 watt mirror light fitting with decorative aluminium LED batten having extruded polycarbonate housing,High optically efficient diffuser,above wash basin complete with all accessoriesetc. directly on wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.(Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj) |
| 117 | S/F. of foot light (Make Havells/Wipro/Panasonic/Bajaj/Crompton or equivalent reputed make) (4 module foot light) |
| 118 | S/F. of Inverter, UPS 1150VA (Make Microtech/Su-kam/Luminous) |
| 119 | S/F of Inverter Battery 12V 150AH (Make Exide / Amrom / Su-karm / Luminous with 48 Month warranty). |
| 120 | S/F. of Inverter Stand (Make Microtech/ Su-kam/ Luminous) |
| 121 | Supply, Installation, Testing and Commissioning of main switches (IS 13940 Part-3/1993 on existing surface / wall mounting and complete with HRC fuse links, interconnections, earthing etc. as required as per direction of Engineer In Charge. (Make- Anchor/ Cona/ Havells)a) 63 Amp ICDP M/S |
| 122 | Earthing with G.I earth pipe 3 meter long 40 mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangment and watering pipe etc with charcoal and salt as required |
| 123 | Supplying and laying 8SWG copper wires ISI marked at 0.5meter bellow ground level for conductor earth electrode including soldering etc as required. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysNov 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender