Tender For Construction Of Boundary Wall And Entrance Gate For Govt. Degree College Lambathach Tehsil Thunag Distt. Mandi H.P. (Sh:- Construction of Boundary Wall Chain Link Fence And Gate).
Tender Value
83.70 Lakhs
Estimated cost
Bid Submission
03 Nov 2026
5 days left
EMD
1.68 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mandi → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Boundary Wall And Entrance Gate For Govt. Degree College Lambathach Tehsil Thunag Distt. Mandi H.P. (Sh:- Construction of Boundary Wall Chain Link Fence And Gate).
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 27-Oct-2026 | Office Order | Technical Bid | 03-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m (one point five metre) in width or 10 (ten) Per Square Metre on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m (one point five metre), including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m (fifty metre) Ordinary rock including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (one Cement : four coarse sand : eight graded stone aggregate 40 mm (forty millimetre) nominal size) including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 3 | Centering and shuttering including strutting, propping etc. and removal of form for : including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge. Foundations, footings, bases of columns, etc. for mass concrete |
| 4 | Columns, Pillars, Piers, Abutments, Posts and Struts |
| 5 | Edges of slabs and breaks in floors and walls Under 20 cm wide |
| 6 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement 1:1.5:3 (one cement : one point five coarse sand: three graded stone aggregate 20 mm (twenty millimetre) nominal size All works upto any Level including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 7 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto any level. Thermo-Mechanically Treated bars of grade Fe-500D or more including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 8 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in super structure above plinth level up to floor any level in all shapes and sizes in :Cement mortar 1:6 (one cement : six coarse sand) including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 9 | 15 mm (fifteen milimetre) cement plaster on rough side of single or half brick wall of mix: 1:6 (one cement: zix coarse sand) including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 10 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 11 | Providing and fixing M.S. BP Sheet 1.66mm to 2.00 mm (one point six six millimetre to two millimetre) thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely)/F M.S BP sheet 1.66mm to 2.00mm (one point six six millimetre to two millimetre) thick in eaves board/ Facia/ Soficts/ Ceiling including cutting fixing and welding to steel roof member and applying a coat of Red lead primer complete including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 12 | Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm (ten centimetre) length and drilling holes upto 10 mm (ten millimetre) dia. etc. complete including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 13 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm (fifty into fifty millimetre) made of G.I. wire of dia 3 mm (three millimetre) including strengthening with 2 mm (two millimetre) dia wire or nuts, bolts and washers Made of G.I. wire of dia 3 mm (three millimetre) as required complete as per the direction of Engineer-incharge. |
| 14 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 Per Square Metre (zero point nine zero liter per ten square mitre) over an under coat of primer applied @ 0.80 ltr/10 Per Square Metre (zero point eight zero liter per ten square mitre) of approved brand and manufacture including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 15 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre (fifty gram per liter) and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives.: New work (Two or more coats applied @ 1.43 litre/ 10 Per Square Metre (one point four three liter per ten square mitre) . Over and including priming coat of exterior primer applied @ 0.90 litre/10 Per Square Metre. : New work (Two or more coats applied @ 1.43 litre/ 10 Per Square Metre (one point four three liter per ten square mitre) including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 27, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Nov 03, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 5 daysNov 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender