Tender For General- Construction Of Amenity Centre On The Land Under The Control Of The Devaswom Board Near Thiruvallur Temple - Auditorium - Fire Fighting System -Electrical Fire Fighting Work
Tender Value
3.53 Lakhs
Estimated cost
Bid Submission
03 Nov 2026
3 days left
EMD
8849
Bank guarantee accepted
Document Fee
780
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ernakulam → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for General- Construction Of Amenity Centre On The Land Under The Control Of The Devaswom Board Near Thiruvallur Temple - Auditorium - Fire Fighting System -Electrical Fire Fighting Work
BOQ
| Sl. No. | Item Description |
| 1 | Fire Fighting system |
| 2 | OD84665/2026-2027:Supply ,installation ,testing and commissioning of electric driven terrace pump mounted on anti vibration pads consisting of following,complete in all respects as required. a) Horizontal type, centrifugal, End suction pump of CI body & bronze impeller with stainless steel shaft, mechanical seal at a flow of 450 lpm at 35 m Head conforming to IS 1520. b)Suitable HP Squirrel cage induction motor, TEFC type having synchronous speed of 1500 RPM & class- 'F' insulation suitable for operation on 415 V, 3 phase 50 Hz AC supply with IP55 protection for enclosureconforming to IS-325 c)MS fabricated common base plate ,coupling,coupling guard ,foundation bolts etc as required d)Suitable cement concrete foundation duly plastered . |
| 3 | OD84683/2026-2027:Supply, installation testing and commissioning of wall mounted cubicle type switchboard of suitable size made out of 2 mm thick MS Sheet totally enclosed, dust andvermin proof with an additional lockable glazed door on the front and consisting ofthe following items i/c connections with suitable copper conductor cable, earthing,painting (red), lettering etc. as required.a)32 Amps TPN Switch fuse unit with HRC fuses (GE / L&T/ Siemens) - 1 No.b) DOL starter suitable for the pump set (Make: L&T / Siemens / GE) - 1 No.c)0-30 amps ammeter with CTs, selector switch - 1 set.d)0-500V Voltmeter with selector switch - 1 sete)3 Phase indication lamps 1 se |
| 4 | 90.12.7.15:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3 core 16 sq mm with factory made clamp |
| 5 | 90.16.1.2:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.65 mm copper conductor (12 SWG) |
| 6 | 90.16.5.2:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.65 mm (12 SWG) |
| 7 | 9.1.8:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 X 16 sq. mm (25mm) |
| 8 | OD84690/2026-2027:Supply and providing the following sizes of bolt and nut with washers on the existing MS box / earth bus etc. as required including drilling necessary holes as required 12 x 3 mm, 25 x 3 mm brass bolt & nut |
| 9 | 18.11.5:Supplying, fixing, testing and commissioning of Butterfly Valve of PN 1.6 rating with bronze or gun metal seat duly ISI marked complete with nuts, bolts ,washers ,gaskets conforming to IS 13095 of following sizes as required:100 mm dia |
| 10 | 18.14.5:Providing,installation,testing and commissioning of non-return valve of following sizes conforming to IS :5312 complete with rubber gasket, GI bolts , nuts, washers etc as required.100 mm dia |
| 11 | 18.17.1:Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required.a) 20 mm nominal Internal dia water hose thermoplastic(Textile reinforced) type-2 as per IS:12585b) 20 mm nominal internal dia gun metal globe valve &nozzlec) Drum and brackets for fixing the equipments on wall.d) Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.30 m |
| 12 | 18.8.7:Providing, laying, testing and commissioning of C class heavy duty GI pipe conforming to IS 1239, i/c welding ,fittings, like elbows, tees, flanges, tapers, nuts ,bolts ,gaskets etc., and fixing the pipe on the wall , ceiling with suitable clamp or support frame and painting with two or more coats of synthetic enamel paints of required shades complete as required.100 mm |
| 13 | 18.9.2:Supplying and fixing single headed internal hydrant valve with instantaneous Gun metal or stainless steel coupling of 63mm dia with cast iron wheel ISI marked conforming to IS 5290(Type A) with blank Gun metal or Stainless steel cap and chain as required:Single headed stainless steel |
| 14 | OD84725/2026-2027:Supply and fixing of weather proof hose cabinet single with PCC support made of 16 Guage MS sheet with full front glass door and locking arrangements suitable to accommodate 1 No 15 m long RLL hose pipe and 1No branch pipe.The cabinet shall be painted to scarlet red colour outside & offwhite inside. |
| 15 | 18.18.2:Supplying and fixing 63 mm dia gun etal short metal branch pipe ith 20 mm nominal interanal diameter size nozzle conforming to IS 903 suitable for Instantaneous connection to Interconnect hose pipe coupling as required:Stainless steel (Grade 304) |
| 16 | 18.16.2:Supplying and fixing 63 m dia,15m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required: Stainless steel (Grade 304) |
| 17 | 16.8:Providing and fixing in position the industrial type pressure gauges with gun metal / brass valves complete as required |
| 18 | 18.22:Providing and fixing of pressure switch in MS pipeline including connection etc as required: |
| 19 | 18.19.1:Supplying and fixing fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia M.S. Pipe connection conforming to IS 904 as required:2 way-100 mm dia M.S.Pipe |
| 20 | OD84741/2026-2027:AIR RELEASE VALVE - Supply, installation, testing and commissioning of Gun metal Air Release valve 20mm dia Make: ATOM/ARIHANT |
| 21 | OD84749/2026-2027:Supply and installation of ABC type fire extinguisher of 4 kg. Capacity complete with initial charges and installation brackets confming to ISI5683 with ISI mark |
| 22 | OD84760/2026-2027:Supply and providing 4.5 CO2 type Fire Extinguisher with hose and clamps includingfixing it to wall as required. |
| 23 | OD84763/2026-2027:Supply, installation, testing and commissioning of manual call points break glass type with hammer & chain |
| 24 | OD84767/2026-2027:Supply and providing Hooter for audio alarm as required |
| 25 | 17.1.9.1:Supplying, installation, testing & commissioning sector panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections as required.4 Zone |
| 26 | OD84769/2026-2027: Supply Installation, testing and commissioning of 12Volt 7AH Battery |
| 27 | 17.5.2:CABLING & WIRINGSupplying & laying of 2x1.5 sq mm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required. |
| 28 | OD84774/2026-2027:SITC of self glowing and fire assembly point and sign board of size 16\\" x 16\\" mmmade of green colour photo luminescent rigid sheat |
| 29 | OD84772/2026-2027:Supply and providing Glow SIgn boards of 3mm PVC foam board size not less than 12'x4' as required |
| 30 | OD168754/2026-2027:Charges for preparation of Electrical/Fire drawing per A3 sheet additional copy |
| 31 | OD168755/2026-2027:Charges for preparation of Electrical/Fire drawing per A3 sheet first copy Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysNov 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender