Heavy Industries and Public Enterprises Boards / Undertakings / PSU Closing in 3 days TDR #58219048

Tender For Civil & Architectural Works Including Design (Wherever Applicable), Manufacturing, Supply, Receipt At Site, Erection, Internal Electrification, Painting & Finishing Works Etc. And Handing Over To Site Of Site Office (Approx. Size 400 Sqm)

Issued by Boards / Undertakings / PSU · Lower Dibang Valley, Arunachal Pradesh
Tender Value
Ref. Documents
Estimated cost
Bid Submission
05 Nov 2026
3 days left
EMD
5 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Organization
Click here to view tendering authority
Tender ID
Click here to view tender id
Competition Type
NCB
Bidding Type
Tender
Location / State
Lower Dibang Valley → Arunachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Click here to view website
Contact Person
Click here to view contact person
Address
Click here to view address

Project Description

Tender for Civil & Architectural Works Including Design (Wherever Applicable), Manufacturing, Supply, Receipt At Site, Erection, Internal Electrification, Painting & Finishing Works Etc. And Handing Over To Site Of Site Office (Approx. Size 400 Sqm) With Parking Lots, Steel Closed/Covered Storage Sheds (7 Nos. Approx. Area 6300 Sqm), Supply And Installation Of Portable Cabins, Development Of Open Storage Yard With Internal Roads And Drains, Concrete Raised Platform, Hard Crusting, Supply Of Precast Concrete Sleepers, Fencing And Gate For Storage Yard And Bhel Office Area, Fencing Of Boundary, Miscellaneous Equipment Foundations, Watch Tower/ Security Cabins, Construction Water Distribution Network Including Overhead Tanks, Storage Yard Area Lighting Etc. At 12X240 Mw Dibang Multipurpose Project, Roing, Arunachal Pradesh. Package A: Immovable Items, Package B: Movable Items

BOQ

Name of Work:- Civil & architectural works including Design (wherever applicable), Manufacturing, Supply, Receipt at site, erection, internal electrification, painting & finishing works etc. and handing over to site of Site office (approx. size 400 SqM) with Parking Lots, Steel Closed/Covered Storage Sheds (7 nos. approx. area 6300 SqM), Supply and installation of Portable cabins, Development of open storage yard with internal roads and drains, Concrete raised platform, Hard crusting, supply of precast concrete sleepers, Fencing and Gate for storage yard and BHEL Office area, Fencing of Boundary, Miscellaneous Equipment Foundations, Watch Tower/ Security Cabins, Construction water distribution network including overhead tanks, Storage yard Area Lighting etc. at 12x240 MW Dibang Multipurpose project, Roing, Arunachal Pradesh. PACKAGE A: Immovable Items, PACKAGE B: Movable Items
Sl. No. Item Description
1TOTAL PRICE FOR \\" Civil & architectural works including Design (wherever applicable), Manufacturing, Supply, Receipt at site, erection, internal electrification, painting & finishing works etc. and handing over to site of Site office (approx. size 400 SqM) with Parking Lots, Steel Closed/Covered Storage Sheds (7 nos. approx. area 6300 SqM), Supply and installation of Portable cabins, Development of open storage yard with internal roads and drains, Concrete raised platform, Hard crusting, supply of precast concrete sleepers, Fencing and Gate for storage yard and BHEL Office area, Fencing of Boundary, Miscellaneous Equipment Foundations, Watch Tower/ Security Cabins, Construction water distribution network including overhead tanks, Storage yard Area Lighting etc. at 12x240 MW Dibang Multipurpose project, Roing, Arunachal Pradesh. PACKAGE A: Immovable Items, PACKAGE B: Movable Items\\", AS PER TENDER'S SCOPE & SPECIFICATIONS. Name of Work: Civil & architectural works including Design (wherever applicable), Manufacturing, Supply, Receipt at site, erection, internal electrification, painting & finishing works etc. and handing over to site of Site office (approx. size 400 SqM) with Parking Lots, Steel Closed/Covered Storage Sheds (7 nos. approx. area 6300 SqM), Supply and installation of Portable cabins, Development of open storage yard with internal roads and drains, Concrete raised platform, Hard crusting, supply of precast concrete sleepers, Fencing and Gate for storage yard and BHEL Office area, Fencing of Boundary, Miscellaneous Equipment Foundations, Watch Tower/ Security Cabins, Construction water distribution network including overhead tanks, Storage yard Area Lighting etc. at 12x240 MW Dibang Multipurpose project, Roing, Arunachal Pradesh. PACKAGE A: Immovable Items, PACKAGE B: Movable Items TENDER NO.: PSER:SCT-DMP-C2445:26:11802, dated 26-10-2026 PREAMBLE FOR BOQ CUM RATE SCHEDULE
2Preamble for the Schedule of Quantities/BOQ Cum Rate Schedule:
3Details of the items in the BOQ Cum Rate Schedule shall be read in conjunction with the Corresponding Consultants/ Customer specifications, drawings and other documents and shall have precedence over any contrary statement mentioned anywhere in this document.
4The work shall be carried out as per construction drawings, specifications, the description of the items in this schedule and/or Engineer’s instructions, Drawings enclosed with the tender are only indicative giving some idea of the type of work involved. The layout, sizes and details of the building, structures and foundations shown in tender drawings may vary at a large extent during actual construction. Final drawings will be issued progressively during the execution of the work.
5Items of work provided in this schedule but not covered in the specifications shall be executed strictly as per instructions of the Engineer.
6Unless specifically mentioned otherwise in the contract, the contractor shall quote his rates for the finished items and shall provide for the complete cost towards fuel, tools, tackle, equipment, constructional plant , temporary works, labour materials, levies , taxes , transport, layout, repairs, rectification, maintenance till handing over, supervision, shops, establishments, services, temporary roads, revenue expenses, contingencies, overheads, profits and all incidental items not specifically mentioned but reasonably implied and necessary to complete the works according to the contract.
7The rate shall also be inclusive of carrying out topography survey of site to establish levels and coordinates at suitable intervals, form existing grid levels and coordinates furnished by the owner, establish bench marks, setting out the location and levels of the proposed structures, constructions and making references, pillars and other identification marks etc. No separate payment will be made towards the same.
8The quantities of the various items mentioned in the BOQ cum Rate Schedule are approximate and may vary up to any extent or be deleted altogether. The overall variation in contract value on execution shall be dealt as per GCC. Contractor has to obtain prior approval of BHEL/ Customer before procurement of bought out items/ building materials.
9BHEL Engineer’s decision shall be final and binding on the contractors regarding clarification of items in BOQ cum Rate schedule with respect to the other sections of the contract.
10In case of any discrepancy between item description, relevant specification, clarification shall be sought at tender stage itself. Otherwise it shall be assumed that the contractor has quoted for the more stringent requirement.
11TOTAL PRICE FOR ENTIRE SCOPE OF WORK AS PER TENDER for SCOPE OF WORK:- PACKAGE- A – Immovable ItemsImmovable Items of Civil & architectural works including Design (wherever applicable), Manufacturing, Supply, Receipt at site, erection, internal electrification, painting & finishing works etc. and handing over to site of Site office (approx. size 400 SqM) with Parking Lots, Steel Closed/Covered Storage Sheds (7 nos. approx. area 6300 SqM), Supply and installation of Portable cabins, Development of open storage yard with internal roads and drains, Concrete raised platform, Hard crusting, supply of precast concrete sleepers, Fencing and Gate for storage yard and BHEL Office area, Fencing of Boundary, Miscellaneous Equipment Foundations, Watch Tower/ Security Cabins, Construction water distribution network including overhead tanks, Storage yard Area Lighting etc. at 12x240 MW Dibang Multipurpose project, Roing, Arunachal Pradesh.PACKAGE-B:-Movable ItemsMovable Items of Civil & architectural works including Design (wherever applicable), Manufacturing, Supply, Receipt at site, erection, internal electrification, painting & finishing works etc. and handing over to site of Site office (approx. size 400 SqM) with Parking Lots, Steel Closed/Covered Storage Sheds (7 nos. approx. area 6300 SqM), Supply and installation of Portable cabins, Development of open storage yard with internal roads and drains, Concrete raised platform, Hard crusting, supply of precast concrete sleepers, Fencing and Gate for storage yard and BHEL Office area, Fencing of Boundary, Miscellaneous Equipment Foundations, Watch Tower/ Security Cabins, Construction water distribution network including overhead tanks, Storage yard Area Lighting etc. at 12x240 MW Dibang Multipurpose project, Roing, Arunachal Pradesh.
12PACKAGE-A: IMMOVABLE ITEMS
13PACKAGE-B: MOVABLE ITEMS
14TOTAL Name of Work: Civil & architectural works including Design (wherever applicable), Manufacturing, Supply, Receipt at site, erection, internal electrification, painting & finishing works etc. and handing over to site of Site office (approx. size 400 SqM) with Parking Lots, Steel Closed/Covered Storage Sheds (7 nos. approx. area 6300 SqM), Supply and installation of Portable cabins, Development of open storage yard with internal roads and drains, Concrete raised platform, Hard crusting, supply of precast concrete sleepers, Fencing and Gate for storage yard and BHEL Office area, Fencing of Boundary, Miscellaneous Equipment Foundations, Watch Tower/ Security Cabins, Construction water distribution network including overhead tanks, Storage yard Area Lighting etc. at 12x240 MW Dibang Multipurpose project, Roing, Arunachal Pradesh. PACKAGE A: Immovable Items, PACKAGE B: Movable Items TENDER NO.: PSER:SCT-DMP-C2445:26:11802, dated 26-10-2026 PART-B PROJECT: 12x240 MW Dibang Multipurpose project, Roing, Arunachal Pradesh BOQ CUM RATE SCHEDULE (PRICE BID) SCOPE OF WORK:- Civil & architectural works including Design (wherever applicable), Manufacturing, Supply, Receipt at site, erection, internal electrification, painting & finishing works etc. and handing over to site of Site office (approx. size 400 SqM) with Parking Lots, Steel Closed/Covered Storage Sheds (7 nos. approx. area 6300 SqM), Supply and installation of Portable cabins, Development of open storage yard with internal roads and drains, Concrete raised platform, Hard crusting, supply of precast concrete sleepers, Fencing and Gate for storage yard and BHEL Office area, Fencing of Boundary, Miscellaneous Equipment Foundations, Watch Tower/ Security Cabins, Construction water distribution network including overhead tanks, Storage yard Area Lighting etc. at 12x240 MW Dibang Multipurpose project, Roing, Arunachal Pradesh.PACKAGE-A : IMMOVABLE ITEMSPACKAGE-B : MOVABLE ITEMS ST NO ITEM DESCRIPTION UOM TOTAL QTY RATES = TOTAL QUOTED PRICE * WEIGHTAGE / (QUANTITY * 100) AMOUNT (INR) = RATE * QUANTITY WEIGHTAGE IN %(UPTO 10 DECIMAL POINT) PACKAGE-A IMMOVABLE ITEMS
15EARTH WORK: Earth work In excavation, backfilling and disposal including all labour, equipments etc complete as per specification, drawing and as directed by engineer- in-charge for the following.
16Earth work in excavation in all types of soil ordinary soil including ash which can be excavated by any means including setting out, levelling, dewatering (wherever required), dressing the sides & bottom, all lifts, ramming/compacting the excavated bottom, stacking, disposal of surplus excavated materials within a lead upto 1Km, spreading/levelling of disposed materials etc all complete for following depths below ground level. a Depth from ground level but not exceeding 2 m CUM 6890.0 0.0058735206 b Depth exceeding 2 m but not exceeding 4 m CUM 80.0 8.55901e-05
17Earthwork in Back filling upto any depth below ground level around foundations, plinths, trenches, drains etc to proper grade and level in layers not exceeding 250 mm thickness using/with selected materials from compulsorily excavated earth available within a lead upto 1 Km and compacted as specified including re-excavation of stacked earth, watering, ramming/compaction by manual/mechanical means, dressing etc all complete.for the following. a at least 90% maximum dry density as per IS-2720 (Part-VII) CUM 666.0 0.0005387313
18Extra over ST No. 101 and 103 to 108 for carriage of material/earth for every 500m or part thereof beyond an initial lead of 1km. b Carriage for disposal of serviceable/unserviceable material/ earth CUM 166.0 1.87783e-05
19Supplying and filling sand upto any depth under floors, around foundations, plinths etc. in layers not exceeding 250 mm thickness and compacted so as to achieve at least 80% relative density as per IS-2720 (Part-XIV) including spreading, watering, ramming/compaction by manual / mechanical means, dressing, royalty (if any) etc. all complete. a For 80% Relative Density CUM 2090.0 0.0232150755
20LEVELING & GRADING: Levelling & grading works including all labour, material (unless otherwise specified in BOQ/contract specification), equipment etc. as per specification, drawings and as directed by engineer - in - charge for the following:
21Earth work in stripping of top soil upto a maximum depth of 0.30m below ground level so as to exclude all debris, grass, vegetation, bushes including roots and organic materials etc for leveling and grading including dressing to specified levels & grades and compacting the graded/stripped surface by manual/mechanical means, disposal of stripped materials within a lead upto 1km etc all complete as per specification, drawing and as directed by the engineer-in-charge. A2609 Earth work in filling upto any depth below ground level for grading to proper grade and level in layers not exceeding 300mm compacted thickness so as to achieve at least 90% maximum dry density as per IS-2720 (Part-VII) with selected approved soil/soft rock from compulsorily excavated earth available within a lead upto 1km and compacted as specified including re-excavation of stacked earth, all lifts, sorting, spreading, breaking clods, watering, ramming/compaction by manual/mechanical means, dressing, finishing to required lines, grades and slopes, tesing etc all complete as per specification, drawing and as directed by the engineer for the following. CUM 1533.0 0.0012400527
22Earth work in filling upto any depth below ground level for grading to proper grade and level in layers not exceeding 300 mm compacted thickness so as to achieve at least 95% maximum dry density as per IS-2720 (Part-VII) with approved borrowed soil (borrowed soil to be arranged by the bidder) and compacted as specified including supplying boorowed soil, royalty/seignorage fee (if any), sorting, spreading, breaking clods, watering, ramming/compaction by manual/mechanical means, dressing, finishing to required lines, grades and slopes, tesing, all lead and lifts etc all complete as per specification, drawing and as directed by the engineer in charge.
23CONCRETE WORK: Providing and placing concrete work including cost of labour, materials (unless otherwise specified in BOQ/contract specification) and equipment for handling, transportation, batching, mixing, placing, vibrating and curing (excluding cost of centering, shuttering and reinforcement) with mechanised equipments like batching plant, transit mixer, concrete pump etc. complete as per drawing, specifications and as per direction of engineer in charge for the following.
24Concrete of grade M7.5 (1 part cement, 4 part sand, 8 parts of 40 mm graded aggregate by volume) as mass filling course, lean concrete, levelling course, mud mat under and around foundations/floors below finished floor level upto depth of 10m from FFL. (For depth greater than 10m from FFL, extra over for additional depth to be paid in Item No 224)
25Concrete of grade M10 (1 part cement, 3 part sand, 6 parts of 40 mm graded aggregate by volume) as lean concrete, levelling course, mud mat under and around foundations/floors below finished floor level upto depth of 10m from FFL. (For depth greater than 10m from FFL, extra over for additional depth to be paid in Item No 224)
26Concrete of grade M15 (1 part cement, 2 part sand, 4 parts of 40 mm graded aggregate by volume) as lean concrete, levelling course, mud mat under and around foundations/floors below finished floor level upto depth of 10m from FFL. (For depth greater than 10m from FFL, extra over for additional depth to be paid in Item No 224)
27Concrete of grade M20 (1 part cement, 1.5 part sand, 3 parts of 10-20 mm graded aggregate by volume) under floors, paving, plinth protection, pipe encasing etc complete below finished floor level upto depth of 10m from FFL. (For depth greater than 10m from FFL, extra over for additional depth to be paid in Item No 224).
28FORMWORK: Providing, fixing and removing formwork at all elevations for all structures, as per specifications and including all labour, material, scaffoldings and centereing etc. complete as per drawing, specifications and as per direction of engineer in charge for the following.
29Fairface form work with good quality water proof ply wood of minimum 12mm thickness and smooth surface below finished ground floor level for foundations, footings, base of columns, walls, columns, pilasters, beams & slabs(for which scaffolding work not required for vertical support of bottom face of formwork), mass concrete, trenches, grade slab, paving etc.including chamfering of edges as per drawing, specification and instruction of engineer in charge. a Upto Depth 10m From FGL SQM 3714.0 0.0220320039
30Fairface form work with good quality water proof ply wood of minimum 12mm thickness and smooth surface above finished ground floor level for columns, beams, suspended/intermediate floors, roofs, lintels, cantilevers, staircases, landings, balconies, etc. including chamfering of edges as per drawing.for all heights as per specification, drawing and instruction of engineer in charge. a For Height Upto 20m from FGL SQM 1553.0 0.0099570017
31Providing, fixing and removing formwork in block-outs/pockets and openings (below 0.1 sqm plan area) at all elevations including cutting, formation of all shapes and all other operations required for making the required shape and size all complete as per specification, drawing and instruction of engineer in charge. a Upto 150 mm depth Each 10.0 2.13975e-05 b Pockets of depths more than 150mm and upto 300 mm depth Each 10.0 3.5228e-05
32REINFORCEMENT WORK : Reinforcement work including all labour, material (unless otherwise specified in BOQ/contract specification), equipment, transportation, handling etc at all level as per specification, drawings and as directed by engineer - in - charge.
33Providing, straightening, cutting, bending, placing in position at any level, binding in position of steel reinforcements of TMT steel of grade Fe-500D or 500EQR confirming to IS:1786 including cost of binding wire, labour, scaffolding, transportation to & from stores etc complete all as per specifications, drawings and as directed by Engineer.
34Roof Treatment works: Roof treatment works including all labour, material (unless otherwise specified in BOQ/contract specification), equipment, transportation, handling, curing, sampling, testing etc at all level as per specification, drawings and as directed by engineer - in - charge. A506 Providing and laying 3mm thick APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane. (Roof treatment over existing old CGI / asbestos roof, Cleaning of old/ existing roof sheet if required shall be in the scope of agency) SQM 615.0 0.0028750724
35MS EMBEDMENTS: Embedments including all labour, material (unless otherwise specified in BOQ/contract specification), equipment, transportation, handling etc. at all level as per specification, drawings and as directed by engineer - in - charge.
36Supply, fabricating and fixing of mild steel embedments, inserts, pipe sleeves, angle pieces, rungs of various diameters, plates of dimensions as required etc. including welding, bolting, cutting, drilling, scaffolding, setting etc. all complete.
37Supply, Fabrication, transportation, delivery at site and erection, installation and alignment of mild steel foundation bolt assembly conforming to IS:2062 and grade 1 of IS:432 in concrete along with nuts, lock nuts (as per IS:1363, 1364 and IS:3138), washers, anchor plates, stiffner plates, protective tape, pipe sleeves, templates etc. including welding, cutting, grinding, threading, drilling etc. all complete.
38GROUTING: Grouting including all labour, material (unless otherwise specified in BOQ/contract specification), equipment, roughening surface, cleaning, ramming, curing etc. at all level , drawings and as directed by engineer - in - charge.
39Providing & grouting of pocket holes, pipe sleeves and under base plate of structural steel work/ machinery/ pipe supporting structures including roughening of surface, cleaning, ramming, curing etc. all complete with mix 1:1:2 (1 cement : 1 coarse sand : 2 aggregate of 6 mm down graded stonechips ) using non shrink admixture as per specification, drawing and direction of engineer-in-charge. (Cost of all material and cleaning the pocket by compressed air shall be in the scope of the contractor).
40BRICKWORK: Brickwork masonry including all labour, material (unless otherwise specified in BOQ/contract specification), equipment, transportation, handling, scaffolding etc. at all levels as per specification, drawings and as directed by engineer - in - charge.
41Providing brick work in cement mortar 1:6 (1 part cement 6 parts coarse sand) in walls, chambers etc. in thickness varying from 230mm to 460mm at all depths, places and positions below plinth including raking out joints, curing, scaffolding etc. complete excluding plastering and painting. a Using fly ash lime bricks confirming to IS 12894 with crushing strength of 75 kg/cm2(including cost of cement for brick making) CUM 290.0 0.0136743926 c Using burnt clay bricks of class designation 7.5 of nominal dimension CUM 118.0 0.0072332822
42Providing brick work in cement mortar 1:6 (1 cement 6 coarse sand) in walls, chambers etc. in thickness 230mm upto 10m level above finished floor level (For height greater than 10m from FFL, extra over for additional height to be paid in Item No 1014), places and position above plinth including raking out joints, curing, scaffolding etc complete but excluding plastering and painting. a Using fly ash lime bricks confirming to IS 12894 with crushing strength of 75 kg/cm2(including cost of cement for brick making) CUM 68.0 0.0042456404 c Using burnt clay bricks of class designation 7.5 of nominal dimension CUM 141.0 0.0114444983
43Providing brick work in cement mortar 1:4 (1 cement 4 coarse sand) in partition walls, chambers etc. in thickness 115mm upto 10m above finished floor level (For height greater than 10m from FFL, extra over for additional height to be paid in Item No 1015), places and position above or below plinth/graded level including providing two nos. 6 mm diameter MS bars at every third layer, raking out joints, curing, scaffolding etc complete excluding plastering and painting as per specification. (Reinforcement payment shall be made seperately as per applicable BOQ in 400 Series) c Using burnt clay bricks of class designation 7.5 of nominal dimension SQM 216.0 0.002234855
44Breaking of existing brick work at all levels including plastering, removing the rubbish up to a distance of 500 m including transportation, loading, unloading etc. all complete as directed by the engineer.
45Providing and filling brick bats in soak pits all complete.
46Providing Autoclave Areated concrete blocks in cement mortar 1:4 (1 part cement 4 parts coarse sand) confirming to (IS: 2185 Pt-3) in walls, chambers etc. for all heights above finished floor level including raking out joints, curing, scaffolding etc. all complete (excluding plastering and painting) as per specification and drawing.
47DAMP PROOF COURSE: Damp proof course including all labour, material (unless otherwise specified in BOQ/contract specification), equipment, transportation, handling, shuttering, centering, curing etc at all level as per specification, drawings and as directed by engineer - in - charge.
48Providing Damp Proof Course of following thickness with 1:1.5:3 concrete (10mm and down graded aggregate) with 2% of approved admixture of water proofing compound all complete. Two layers of hot bitumen coating 85/25 grade as per IS:702 @ 1.7Kg./sqm shall be applied one before & one after the DPC. b 50mm thick SQM 160.0 0.0007278739
49PLASTERING: Cement mortar plaster including making grooves wherever required including all labour, material (unless otherwise specified in BOQ/contract specification), scaffolding, curing etc at all level as per specification, drawings and as directed by engineer - in - charge.
50Providing 18mm thick plaster in two layers outside the building/boundary wall in cement mortar as applicable upto 10m above finished floor level (For height greater than 10m from FFL, extra over for additional height to be paid in Item No 1206) on walls, finished to a smooth finish including providing 3mmx3mm size grooves at junctions of two dissimilar materials all complete a Cement Mortar 1:6 SQM 1018.0 0.0032320518
51Providing 12mm thick plaster internal/external surfaces of building/boundary wall in cement mortar as applicable above finished floor level (For height greater than 10m from FFL, extra over for additional height to be paid in Item No 1206) on walls finished to a smooth finish as per specification all complete. a Cement Mortar 1:6 SQM 1376.0 0.0034829449
52Providing 12mm thick plaster in walls, drains/culverts with a paste of neat cement @ 1kg/sqm and rubbed smooth with trowel etc. all complete.
53FINISHES TO CONCRETE / PLASTERED SURFACES: Finishes, painting to concrete, plastered surfaces including all labour, material (unless otherwise specified in BOQ/contract specification), equipment, surface preparation, scaffolding etc. at all level as per specification, drawings and as directed by engineer - in - charge.
54Two or more coats of white wash/ colour wash as per IS 627 of approved brand and manufacture to give an even shade including a priming coat as per specifications.
55Providing and applying two or more coats of acrylic emulsion paint as per IS 5411 of approved brand, shade and manufacture to give smooth, hard, durable & glossy finish over a coat of primer over prepared plaster surface as per manufacturers guideline.
56Two or more coats of synthetic enamel paint of approved make madefrom synthetic resins and drying oil with rutile titanium dioxide and otherselected pigments to give smooth, hard, durable & glossy finish to allinterior and exterior surfaces complete. A1316 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth, complete.” SQM 880.0 0.0009837626
57Providing and applying two or more coats of Acrylic based weather coat paint of approved brand and manufacture and required shade over one coat of primer after necessary cleaning/ washing, preparing the surface using coir brush/ wire brush, sand paper, including filling of cracks with putty wherever required etc. all complete to give smooth, hard, durable & glossy finish over a coat of primer over prepared plaster surface as per manufacturers guidelines. The final finished coating shall be fungus resistant, UV resistant, water repellant and extremely durable with color fastness as per specification.
58FLOORING AND SKIRTING: Flooring and skirting at all level including base layer, labour, material (unless otherwise specified in BOQ/contract specification), equipments, transportation, handling, curing, polishing etc. at all level as per specification, drawings and as directed by engineer - in - charge.
59Providing and laying interlocking M30 Grade concrete blocks in paving with approved colour and pattern and should be laid on the subbase and bedding of sand minimum 50mm thick as per specifications and recommendations of manufacturer.(inclusive of cost of cement for paver manufacturing) b 75mm SQM 250.0 0.0022332768
60Providing and laying 14 to16mm thick polished Granite stone of approved color and texture in flooring with brass/ stainless steel strips. Under bed shall average 35mm thk of 1 cement : 2 sand : 4 stone aggregate by volume and brought to proper level. The granite stone slabs/tiles laid over under bed, pressed and tapped down with wooden mallet to the proper level, lifted and pressed again with thick cement slurry @3.3kg/sqm spread over the surface with fine joint finished including pigments, curing, grinding, granite polishing etc. all complete.
61Providing and laying vitrified ceramic tiles of polished variety of size 600x600/300x300 from reputed / approved manufacturer, complete including underbed of cement mortar 1:3 minimum 20mm thick underbed for flooring and 12mm thick underbed for dado/skirting with neat cement slurry @3.3Kg/sqm etc. all complete for following a 7mm thick tiles In flooring SQM 1225.0 0.0134470776 c 7mm thick tiles In skirting and dado upto specific height (300x150) SQM 35.0 0.0003988129
62Providing and laying vitrified ceramic tiles of matt finish of size 600x600mm from reputed / approved manufacturercomplete including underbed of cement mortar 1:3 minimum 20mm thick underbed for flooring and 12mm thick underbed for dado/skirting with neat cement slurry @3.3Kg/sqm etc. all complete for following a 7mm thick tiles In flooring SQM 31.0 0.0003718416
63Providing and fixing glazed ceramic tiles of approved color and design of size 200x300mm / 300x300mm in dado of approved size, projecting 6mm uniformly from adjacent plaster or wall finish. The mix for 20mm thick underbed plaster shall consist of 1part cement and 3 parts sand by weight. fairly moist but firm, tiles shall be pressed over under bed by applying cement slurry @ 3.3kg/sqm including pigments, curing etc all complete for following thicknesses: b 7mm thick SQM 231.0 0.0026321655
64FALSE CEILING: False ceiling including all labour, material (unless otherwise specified in BOQ/contract specification), equipment, transportation, handling, suspension system etc at all level as per specification, drawings and as directed by engineer - in - charge.
65Providing, fixing and laying light weight mineral fiber tile false ceiling of minimum thickness 15 mm and exposed surface semi-perforated with depth of perforation as 4 mm and humid resistance of 95% RH and fire performance of class 0/1 as per BS 476 with metal suspension grid system with galvanized Tees of section 24 X 38 mm for main runners of approved colour and make as per specification including 50mm thick mineral wool insulation (density48kg/cum) as per IS:8183 bound in polythene bags on top of panels. Additional hangers and height adjustment clips shall be provided for return air grills, light fixtures. A.C. ducts etc. suitable M.S. channel (minimum MC 75 @ 1.2m) grid shall also beprovided above the false ceiling level for movement of personnel to facilitate maintenance of lighting fixtures, AC ducts etc. complete with cut-outs etc.The size of tiles shall be 600 X 600 mm or 600 X 1200 mm. Required MS channel shall be measured & paid extra under respective item unit rate.
66MISCELLANEOUS: Miscellaneous works including all labour, material (unless otherwise specified in BOQ/contract specification), equipment etc. at all level unless otherwise specified as per specification, drawings and as directed by engineer - in - charge.
67Providing Earthing pit as per drawing with charcoal & salt, GI pipes, GI earth electrodes, GI wire, GI strips, brick chamber with covers including associated earthwork etc. all complete.
68WATER SUPPLY: Water supply work including men, material (unless otherwise specified in BOQ/contract specification), equipment etc. at all level as per specification, drawings and as directed by engineer - in - charge.
69Providing and fixing in position tested heavy duty type chromium plated (CP) brass long neck/body bib cocks including sockets, union, nuts etc all complete - 15mm nominal bore.
70Providing and fixing in position heavy duty brass stop cock of approved quality including all specials etc all complete - 15mm nominal bore. A2102 Providing and fixing in position of 15 mm dia PTMT Pillar Cock with approved colour & quality including necessary fittings, etc. complete as per direction of bhel engineer. NOS. 15.0 2.71976e-05 A2103 Providing and fixing in position of 25 mm dia gun metal gate valve including all necessary fitting & fixture etc. complete as per standard specification. NOS. 2.0 1.08275e-05 B2103 Providing and fixing in position of 40 mm dia gate valve including all nacessary fitting & fixture etc. complete as per standard specification. NOS. 2.0 1.43713e-05 A2104 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes(Including removal of old damaged pipes if required) , having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Note: Prior approval of sample and brand by BHEL Engineer-In-Charge is necessary before use. 0.0 a 15mm dia RM 65.0 0.0001621498 c 25mm dia RM 15.0 5.23912e-05 f 50mm dia RM 50.0 0.0004062725
71Providing and fixing 610mmx453mmx6mm thk approx size. mirror from reputed mirror manufacturer. Mirror shall be mounted with glass adjustable revolving CP brackets with CP screws etc all complete.
72Providing and fixing 25 mm diameter stainless steel towel rails (600mm X 25mm) with C.P. mounting brackets all complete.
73Providing and fixing C.P. Soap holder mounted with C.P. screws etc all complete.
74Providing and fixing stainless steel / C.P. liquid soap dispenser. Dispenser shall be round and easily revolving with removable threaded nozzle and mounted on C.P. brackets etc all complete.
75Providing and fixing glazed vitreous wall mounted paper holder with suitable cover cum cutter fitted with CP screws etc. all complete.
76Providing and fixing chromium plated brass shower rose 100mm dia with 15 or 20 mm inlet dia shower arm all complete.
77Providing & fixing in position P.V.C. water tank of Sintex or approved equivalent including making all necessary inlet & outlet pipes, fixture, ball cocks, valves etc all complete for following capacities. GI pipes shall be paid separately under ST No. 2105. a 500 litres capacity NOS 1.0 7.20214e-05 b 1000 litres capacity NOS 1.0 0.0001440427 c 2000 litres capacity NOS 1.0 0.0002880855 A2116 Providing & fixing in position of CI vent pipe of dia. 100mm (approx. ht. 3m ) in septic tank. Rate to include all necessary fitting & fixture, labour etc. RM 3.0 3.00585e-05 A2117 Providing & fixing steel hangers(min 5 pins) for hanging clothes on walls, behind doors, etc as per direction of BHEL engineer. Nos 15.0 2.37728e-05
78SANITARY: Sanitary work including all labour, material (unless otherwise specified in BOQ/contract specification), equipment etc. at all level as per specification, drawings and as directed by engineer - in - charge.
79Supply and fixing glazed vitreous china Wash Basin of approved make conforming to IS:2556 part 4 of oval shape with R.S. or C.I. brackets painted white, 15mm chromium plated brass hot & cold faucets with nylon washers, chromium plated brass chain with rubber plug, 32mm chromium plated brass bottle trap and waste of standard pattern, 32mm dia chromium plated brass trap unions, plastic connection pipe with chromium plated nuts, fittings, cutting and making good the walls where required etc all complete. a White EACH 17.0 0.0008345633
80Providing and fixing stainless steel kitchen sink of size 610x510x200mm with drainboard conforming to IS: 13983 including all fittings etc. all complete.
81Providing and fixing colour glazed vitreous china European type water closet conforming to IS:2556 with siphon, open front solid plastic seat and plastic cover, low level 12.5 litre PVC flushing cistern (same colour as WC) with valveless fittings, 2 way bibcock with health faucet necessary C.P connections etc all complete. a Floor mounted EACH 16.0 0.0015413263
82Providing and fixing colour glazed vitreous indian type Orissa pattern (580x440mm) water closet conforming to IS:2556 part 3 with all fittings including foot rests, low level 12.5 litre PVC flushing cistern with valveless fittings, 2 way bibcock with health faucet necessary C.P connections etc all complete.
83Providing and fixing white flat back glazed vitreous china urinals of size 370x315x620 mm with photo voltaic control flushing system as per IS:2556 (part 6, section 1) with flush pipes, lead pipes, gratings, traps and necessary C.P. fittings etc. all complete.
84Providing, laying light duty non pressure NP3 class RCC pipes with collars jointed with stiff mixture of cement mortar 1:2 including testing of joints etc all complete for following. c 450mm dia RM 143.0 0.0033521686 d 600mm dia RM 20.0 0.0005772157
85Providing, laying light duty non pressure NP2 class RCC pipes with collars jointed with stiff mixture of cement mortar 1:2 including testing of joints etc complete for following. b 250mm dia RM 110.0 0.0012524629
86Providing and fixing circular heavy duty C.I. manhole cover of 600 mm dia with frame etc. all complete.
87Providing and fixing square mouth S.W Gully trap grade 'A' complete with CI grating, brick masonry chamber(Clay Brickwork in 1:6 mortar, 12mm plaster in 1:6 mortar & 1:2:4 Cement Concrete) and water tight CI cover with 300x300mm (inside). The weight of cover to be not less than 4.53 Kg and frame to be not less than 2.72 Kg etc all complete for following sizes: a 100x100mm P or S Type. EACH 12.0 0.0002324521
88Providing and fixing 100mm heavy duty UPVC floor traps with 100 mm inlet and 100 mm outlet & C.P jalli all complete.
89Providing and fixing white viterous urinal partitions of size 675x325x85mm all complete.
90Providing, laying spun CI pipes with conforming to IS 1536 complete for following. (Excavation, backfilling, concrete to be paid seperately) b 100mm dia RM 100.0 0.0015978698
91Providing and fixing HDPE pipes in concrete/ brick work of following sizes including cutting, fixing and levelling in position etc. all complete. b 100 mm dia RM 20.0 0.0001123818
92ROAD WORKS: Road works including all labour, material (unless otherwise specified in BOQ/contract specification), equipment etc. as per specification, drawings and as directed by engineer - in - charge.
93Preparation of sub grade by excavating earth to required depth for all types of soil/ rock, dressing to camber and consolidating the base including making good the undulation etc and disposal of surplus earth within a lead upto 1 km etc. all complete.
94Providing, stacking & laying granular morrum for shoulder including watering, compaction with road roller to required camber etc all complete.
95Providing & laying water bound macadam sub base course in layers of required thickness with crushed stone aggregates 90 to 40 mm down size (IRC 19 - grading -1), stone screening & blinding material including screening, sorting, spreading to template & consolidation with road roller including carriage, spreading & consolidation of blinding material moorum etc all complete.
96Providing & laying water bound macadam base course in layers of required thickness with stone aggregate 63mm to 40mm size(IRC 19 - grading -1), stone screening and blinding material including screening sorting, spreading to template and consolidation with road roller including carriage, spreading and consolidation of blinding material moorum etc all complete.
97Providing & Laying water bound macadam base course with stone aggregate 50mm to 20mm size stone(IRC 19 -grading -1) screening & binding material including screening, sorting, spreading to template & consolidation with road roller including carriage spreading & consolidation of blinding material moorum etc all complete. NS-1 Providing & laying stone shingle 50 mm & below size with binding material for bed preparation including screening, sorting, spreading to template and consolidation with road roller including carriage, spreading and consolidation of binding material etc. all complete. CUM 675.0 0.0128511167 TOTAL PACKAGE-A 0.0 0.4637571927 PACKAGE-B MOVABLE ITEMS 0.0
98DOORS & WINDOWS: Doors, windows, ventilators, louvers, roof ventilators, rolling shutters, partitions including all labour, material (unless otherwise specified in BOQ/contract specification), equipments, transportation, handling, preparation of working drawings etc. at all level as per specification, drawings and as directed by engineer - in - charge.
99Providing and fixing wooden frame conforming to IS 4021 made of best quality seasoned CP teakwood free from large or loose knots, cracks or other defects including sand paper smoothening, hold fasts, beading, primer and finish painting / polishing etc. all complete with proper wood joinery, accurately set to required lines or levels and rigidly secured in place. (Finish painting / polishing paid separately) A903 Providing, fitting and fixing solid core flush door shutter as per IS 2202 part II, 35mm thick homogenous particle board bonded with BWP type phenolformaldihyde synthetic resin, partical board core conforming to IS 3087 type I, 35x12 mm thick teakwood beading all around including preparation of working drawings. godrej or equivalent make mortice lock with handels on both sides,approved ISI mark anodised fittings like door stopper,300mm long tower bolts,16x300mm long aldrops ,125mm long handles on both sides etc. butt hinges, sliding bolt, knobs, (all fittings shall be anoidised aluminium color dyed), finish synthetic paint over primer, screws etc. all complete as per drawing, specification and instruction of engineer in charge. with commercial faces and teak wood edges. (Finish painting included in the item) SQM 40.0 0.0020363592
100Providing and fixing single or double steel door shutters with 18 gauge M.S. sheets shutter presenting a flush surface on the outside and inside stiffened with semitubular edge and central stiffening rail which shall convey the lock including fixtures, Godrej or equivalent make mortice lock with handle on both sides, shop and final painting etc all complete.
101Providing and fixing steel windows/ventilator with steel sections as per IS:1038, IS:1361 & IS:7452 latest revision including all fittings, metal beadings, hold fasts, shop and final painting ,glazing etc. all complete. (Glazing shall be paid separately) a Openable type SQM 112.0 0.0028670718
102Providing and fixing anodised aluminium work of Jindal, Hindalco or other equivalent approved make for door frames, windows, ventillators, partitions, railing etc with extruded standard tubular and other sections including all fittings & fixtures and accessories of approved make conforming to IS733 and IS1285, anodised and electro color dyed to required shade according to IS 1868 (minimum anodic coating of grade AC15), fixed with rawl plugs, expansion fasteners, SS screws or with fixing clips, including necessary filling of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt for bi-metalic protection etc. including preperation of working drawings, aluminium cleat angle, aluminium snap-on-beading for glazing/panelling, stair case tread nosing, with all fittings and fixtures (like tower bolts, handles, door stopper with rubber shoes, 'L' drops, stays, floor springs, hydraulic door closures etc.), CP brass/stailess steel screws, providing and fixing hinges/pivots, and making provision for fixing of fitting wherever required including cost of PVC/neoprene gasket, all complete as per drawing, specification and instructions of engineer in charge (Glazing and panelling shall be paid seperately).Weight of aluminium section only shall be measure.
103Providing and fixing of door closers as per IS 3564 ,of approved make & quality all complete of following type : a Over head hydraulic door closures Each 28.0 0.0005229034
104Providing and fixing PVC doors (25mm thk double skin) of sintex or equivalent make including all fitting & fixtures as per specification, drawing and instructions of engineer in charge.
105Providing, fixing and fitting of glazing of first grade class in steel/aluminium/wooden frames, where ever required, cleaning after fixing including hardware, gaskets, clips, beadings etc. all complete. c 5.5 mm thick clear float glass SQM 61.0 0.0010383712
106Providing and fixing 12 mm thick BWP particle board, decorative veneer (prelaminated) on both sides, as panels in aluminium framed door shutter, fixed with necessary snap-on-beading etc. all complete (excluding aluminium works).
107ROOFING / SIDE CLADDING: Roofing / side cladding work including all labour, material (unless otherwise specified in BOQ/contract specification), equipment, transportation, handling, scaffolding, laps, hooks, washers, corner pieces etc. at all level as per specification, drawings and as directed by engineer - in - charge.
108Designing, providing, Erection and fixing profiled External Cladding sheet manufactured out of 0.55 mm TCT(Total Coated Thickness) of permanently colour coated zincalume steel (150gsm. zinc-aluminium alloy coating total of both sides as per AS 1397:1993) having 300MPa yield strength. The colour coating shall comprise of 20 microns finish coat over a 5 micron primer coat on the exposed side and a back coat of 5 micron over a primer coat of 5 micron on reverse side.The sheet shall have 500 mm cover width, 47mm height crests at 250mm centres with special male/female side laps and anti-siphoning features to prevent leakage. The sheet shall be fixed with the help of concealed compatible interlocking clips and wafer head zinc coated self drilling fastners/screws 4.2 X 25mm long on to the sub-girts. The clips shall be concealed and no fastners are to penetrate the external sheeting, all complete as per specification. a) final painting with Silicon Modified Polyester(SMP) SQM 7644.0 0.0787231236
109Providing and fixing 1 mm thick corrugated/semicorrugated G.I. sheet in roofs, cladding of minimum galvanisation of 275 gsm total on both sides with minimum 150mm overlapping, 8 dia G.I. hook bolts or 'J' Bolts and nuts @305 mm c/c along with G.I. and bitumen washers including cutting of sheets for opening etc. all complete. (This item shall be used for perimeter/boundary fencing, etc. as per direction of Engineer-in-charge) A1517 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tappingscrews of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. SQM 6734.0 0.04326581 B1517 Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : 0.0 a Ridges Plain (500 - 600mm) RM 390.0 0.0018059021 b Flashings/ Aprons ( upto 600 mm) RM 262.0 0.0011066571 c North Light Curves RM 91.0 0.0004322579 d Barge Board (upto 300 mm) RM 182.0 0.0007147592 e Crimp Curve SQM 945.0 0.0040832393 f Gutter (600 mm over all girth) RM 815.0 0.009312913
110Supply & fixing FRP (fibre reinforced plastic) sheets 2 mm thick including GI hooks/ J or L bolts, nuts, washers, bitumen washers etc. complete including overlap 100mm. A1519 Designing, providing and fixing Insulated Sandwitch Panels 60 mm thick (Main structural walls), of desired height, suitable width panels with colour coated GI sheet of of 0.5 mm thickness on inner and outer side using precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 MPA steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation. insulation shall be done using 60 mm thick PUF of 38 kg /m3 (min.) sandwiched between the sheets. Insulated sandwitch panels shall be pre-fabricated and supplied at site for installation.The Sandwitch Panels shall be joined together by tongue and groove method, joints shall be sealed with silicon sealant or other suitable sealant to ensure 100% leak proof. The outer framing structure shall be fabricated with ISMC 75x40x3mm or as per approved design, MS “T” welded for securing panels. the above columns will be grouted to the plinth beam / floor by means of expansion fasteners. The entrance will be provided with 1no-portico made up of puf panels should have an aesthetic look of size min. 4m x 3m. Note: Structural steel work for outer frame shall be paid extra under the relevant item. SQM 240.0 0.0026650225
111RAIN WATER DOWN TAKE PIPES: Rain water down take pipes at all level including all labour, material (unless otherwise specified in BOQ/contract specification), transportation, 2 coats of approved paint over one primary coat, fixtures, accessories etc as per specification, drawings and as directed by engineer - in - charge.
112Providing and fixing UPVC down take pipes of 110mm diameter- Class 3 as per IS:4985 all complete.
113MISCELLANEOUS: Miscellaneous works including all labour, material (unless otherwise specified in BOQ/contract specification), equipment etc. at all level unless otherwise specified as per specification, drawings and as directed by engineer - in - charge. A1836 Supply & fixing of Turbo Vent 600 mm Dia. all complete as per specification NOS. 35.0 0.0007845363 A1845 Design, manufacturing, supply, delivery to site, and complete installation of a field porta cabin as per approved specifications and drawings, including MS steel structural framework with primer and finish paint, insulated wall and roof sandwich panels, flooring with pre-laminated/plywood base and anti-slip vinyl/laminate finish, doors and windows with aluminium/glass frames, locks and accessories, furniture, concealed electrical wiring with sockets, switches, distribution board, lighting, fans, and earthing, ventilation/exhaust fans or small HVAC units where required, internal and external painting, and finishing works. The work shall also include transportation, loading, unloading, site assembly, alignment, anchoring, and miscellaneous accessories such as door stoppers, window fittings, sealants, and signage. All materials, workmanship, and installation shall conform to approved makes and specifications, and the work shall be executed as per the instructions and satisfaction of the Engineer-in-Charge, complete in all respects. NOS. 2.0 0.0096418619
114FENCING AND GATES: Fencing and gates including all labour, material (unless otherwise specified in BOQ/contract specification), equipment etc at all level as per specification, drawings and as directed by engineer - in - charge.
115Supplying and erecting in position 2.4 m high PVC coated gavanised chain linked fencing of minimum 8 gauge (including PVC coating ) of mesh size 75mm x 75mm. The diameter of the hot dip galvanised steel wire for chain link fencing excluding PVC coating shall not be less than 12 gauge. GI barbed wire fencing of height of 600 mm confirming to IS 298 at top of chain link fencing shall be provided with 4 strands of barbed wire hot dip galvanised wire of 12G comprising of 2 ply of wires with barbs of 16G spaced at 100mm. Cost to include for GI hook bolts, rings & washers, hot dip galvanised tension wires, 25X6 mm GI flat stretcher bar at end posts, accessories etc. all complete. (Structural post shall be separately under item 2007/2008)
116Supply, fabrication and fixing of mild steel posts for fencing including painting etc all complete. (for GI Sheet fencing refer ST NO. 1517)
117Supply, fabrication and installing in position and testing MS Gates out of channels, joists, angles, flats, plates, pipes, welded steel wire mesh & sheets including stiffners, bracings, fabricated hinges, MS Aldrops with locking arrangement, tempered steel pivot, guide track of MS Tee, bronze aluminium ball bearing arrangements, castor wheels, paintings etc. all complete.
118SANITARY: Sanitary work including all labour, material (unless otherwise specified in BOQ/contract specification), equipment etc. at all level as per specification, drawings and as directed by engineer - in - charge.
119Providing and fixing vertical wall mounted water geysers/heaters(minimum 5 star rating) of required capacity including all connections & fittings(angular stop cock and brass connection pipes, etc.) all complete as per specification. a 15 Litres Each 1.0 8.82654e-05
120STRUCTURAL WORKS: Structural steel works including all labour, material (unless otherwise specified in BOQ/contract specification), equipments unless otherwise specified, transportation, handling etc. at all level as per specification, drawings and as directed by engineer - in - charge.
121Supply, fabrication at site/shop, erection & alignment of structural steel of grade E250 in Rolled/built up section/combination of both at BHEL site conforming to IS:2062/tubular sections in columns, beams, struts, ladders, brackets, stiffeners, stub columns, truss, bracings, cleats, base plates, splice plates, gussets, end plates, stairs, stringers, treads, landings, etc. including 2 coats of red oxide zinc-chromate primer connection design & preparation of fabrication drgs, straightening, cutting, bending, grinding, machining, drilling, welding, electrodes and other consumables, alignment, assembly, edge preparation, inspection of welds, visual inspection, rectification and correction of defective welding works, production test plate, inspection and testing, protection against damage in transit, stability of structures,temporary structures (weight of temporary structures not payable), etc all complete as per specification and drawing. Payment Breakup:1. On Completion of Fabrication & Supply at site - 70%2. On Completion of Erection, Alignment, Welding/Bolting - 30%
122Extra over ST No. 2301 for providing and applying two coats of synthetic enamel paint with minimum 50 micron total dry film thickness (DFT) of approved make and shade to achieve an even shade over steel sections already having primer coats and keeping overall DFT with primer not less than 110 microns including protection and cleaning, scoffolding etc. all complete.
123Providing and fixing in position of permanent mild steel bolts (class 4.6 as per IS : 1367 and grade `C' as per IS: 1363) and nuts, washers etc. up to and inclusive of 39 mm diameter and upto 300mm long for structural steel work etc all complete.
124Providing and fixing in positing of high strength structural bolts (of property class 8.8 and product grade `C' as per IS: 1367) and conforming to IS: 3757 and high strength structural hardened and tempered nuts (of property class `8' as per IS:1367) conforming to IS:6623 with hardened and tempered washers as per IS:6649 etc. up to and inclusive of 39 mm diameter and upto 300 mm long for structural steel work etc all complete. FM FURNITURE AND FURNISHING:Modular Furnishing: Providing mastro type table for site incharge, conference hall table, modular office type cubicle including cabins, tables, racks, chairs of approved make required as per schematic drawings/ sepcifications and as directed by Engineer-In-charge etc. all complete. 0.0 FM-1 Supply, delivery, and installation of Mastro-type Site Incharge Table, overall size approximately 1800mm (L) x 900mm (W) x 750mm (H), fabricated with 25mm thick pre-laminated MDF board top having 2mm PVC edge banding, supported on powder-coated mild steel frame structure with 18mm thick pre-laminated MDF modesty panel; including fixed side return table of size approx. 1200mm x 450mm x 750mm (H) with one drawer and open shelf combination, made of 18mm pre-laminated MDF board with matching finish and securely fixed to the main table; and mobile pedestal unit of size approx. 400mm x 450mm x 650mm (H) made of 18mm pre-laminated MDF, consisting of three drawers (stationery, utility, and filing) with central locking, heavy-duty telescopic channels, and four castor wheels (two lockable). The entire assembly shall have a uniform Mastro light oak/teak shade (or approved equivalent) finish, stainless steel/chrome hardware, and black or grey powder-coated MS frame. The item shall include complete supply, installation, alignment, and finishing at site, ensuring all edges are smooth and edge-banded, joints are stable, drawers operate smoothly, and surfaces are scratch-resistant. The unit shall be delivered complete in all respects with a minimum one-year warranty for materials and workmanship NOS. 1.0 0.0004258655 FM-2 Supply, delivery, and installation of conference hall table with a minimum seating capacity of 22 persons, made of high-quality engineered wood or laminated particle board, featuring sturdy tabletop, cable management provisions, modesty panels, and durable supporting framework. The table shall be designed for ergonomic seating, ease of movement, and professional aesthetics, with approved make such as Nilkamal, Godrej, Featherlite, or equivalent. The work includes delivery, assembly, installation, and finishing at site, complete with all accessories, as per the directions and satisfaction of the Engineer-in-Charge. NOS. 1.0 0.0014947045 FM-4 Providing and fixing modular office type cubicles including part cabins of size 1800mm x 750mm complete with pedestal, keyboard tray, CPU trolley and all necessary accessories as per the finalised furniture layout drawing. The partition shall be of 45mm thick aluminium panel, fully powder coated in approved shade and incorporating a double raceway system for electrical and data cabling. The panel shall be finished with 25mm thick pre-laminated particle board having 2mm PVC edge banding, with the lowest section from floor level up to 2'-5\\" in particle board and the top section of 1'-8\\" height in upholstered pin-up board. The worktop shall be of 25mm thick pre-laminated particle board with 2mm edge banding, supported on powder-coated MS brackets, and provided with cable manager/grommet holes. Each cubicle shall include a movable three-drawer pedestal (box, box, file type) with central locking and telescopic channels, a metal keyboard tray with mouse pad, and a movable CPU trolley with lockable castors. All hardware fittings shall be of approved make such as Hettich, Hafele, or equivalent. All aluminium profiles shall have a minimum powder coating thickness of 60–80 microns. Installation shall be carried out as per approved drawings, ensuring proper alignment, level, and workmanship to achieve a neat and professional finish. The item shall be measured and paid per complete cubicle unit including all accessories and fittings as specified above. 0.0 FM-4.1 4-seater cubicle (workstations with shared partitions and individual accessories as above) NOS. 4.0 0.0052300743 FM-4.2 2-seater cubicle (shared partition and individual accessories as above) NOS. 4.0 0.0032510518 FM-4.3 1-seater cubicle (individual workstation with all accessories as above) NOS. 3.0 0.0014446025 FM-5 Site Incharge premium chair — executive high-back ergonomic with headrest, adjustable arms, synchro-tilt, mesh/leatherette, chrome base, heavy-duty mechanism Nos. 1.0 0.000123167 FM-6 Chair for senior executive — executive high-back, leatherette, heavy-duty mechanism, chrome base Nos. 6.0 0.0004446539 FM-7 Chairs for executive & conference hall — mid-back revolving, cushioned seat & back Nos. 62.0 0.0042927545 FM-8 Chairs for visitors — cantilever base, cushioned seat/back, chrome frame Nos. 18.0 0.0008955711 FM-9 Three-seater sofa — wooden frame, high-density foam, fabric/leatherette upholstery (~1800mm) Nos. 3.0 0.0006930752 FM-10 Teapoy table — wooden/metal frame with 12mm glass top and lower shelf (~900×450×450mm) Nos. 3.0 0.0004634419 FM-11 L-type executive table (4½'×2' or 4½'×1½') — 25mm PLPB top, edge banding, side return, drawers Nos. 6.0 0.0016575355 FM-12 Office table (4½'×2') — pre-laminated top, modesty panel, drawer pedestal Nos. 2.0 0.0003173115 FM-13 Office running table with centre partition (4'×2') — worktop + 45mm centre partition, raceway provision Nos. 2.0 0.000576171 FM-14 Vertical blinds — polyester slats, aluminium headrail, approved shade/profile Sqm 40.0 0.0003096342 FM-15 Plain cupboards — 1800mm H × 900mm W × 450mm D, 18mm PLPB, shelves, lockable shutters Nos. 8.0 0.0013638827 FM-16 Vertical filing cabinets — 4 drawers, CRCA steel 0.8mm, powder coated, telescopic channels Nos. 8.0 0.0013332657 FM-17 1200mm high glass hinged door units — PLPB body with glass shutters, shelves inside Nos. 8.0 0.0015531567 FM-21 Supply, delivery, and installation of 5-seater sofa with cushions and matching center table of Nilkamal/Godrej/Featherlite or equivalent make, including all materials, accessories, labour, transportation, loading, unloading, placement at site, and all incidental charges, complete as per the directions and to the satisfaction of the Engineer-in-Charge. Set 2.0 0.0006802019 FM-23 Supply, delivery, and installation of RO Domestic Water Purifier of Kent, Aqua Grand, or equivalent approved make, with RO + LED UV + High TDS Membrane + TDS Control, suitable for treating high fluoride or chemically contaminated water, having a discharge capacity of 20 LPH and a minimum storage capacity of 8 liters, including all materials, fittings, accessories, electrical connections, transportation, loading, unloading, installation, testing, and commissioning, complete in all respects as per manufacturer’s specifications and to the entire satisfaction and direction of the Engineer-in-Charge. Nos 3.0 0.0003877149 FM-24 Supply, delivery, and installation of Fly Catcher/Insect Killer Machine of 40W capacity equipped with UV lamps for effective insect control, housed in a corrosion-resistant metal body with a protective outer grill and removable collection tray, suitable for indoor use, of approved make such as Godrej, Osho, Eco-Lite, or equivalent, including all necessary materials, accessories, electrical connections, labour, transportation, loading, unloading, installation, testing, and commissioning, complete in all respects as per manufacturer’s specifications and to the entire satisfaction and direction of the Engineer-in-Charge. Nos 1.0 2.44873e-05 FM-30 Supply, delivery, and installation of 126 cm (50 inches) 4K Ultra HD Smart LED TV of LG, Samsung, VU, or equivalent approved make, featuring high-resolution display, smart TV functionality with built-in apps, multiple HDMI and USB ports, energy-efficient operation, wall-mount or stand installation as required, including all materials, accessories, transportation, loading, unloading, installation, testing, and commissioning, complete in all respects as per manufacturer’s specifications and to the entire satisfaction and direction of the Engineer-in-Charge. Nos 1.0 0.0003401009 FM-33 Supply, delivery, and installation of a single door refrigerator of minimum 184 L capacity of LG/Samsung/Haier or equivalent approved make, with energy-efficient operation, adjustable shelves, vegetable/fruit drawer, freezer compartment, and durable body finish, including all materials, accessories, transportation, loading, unloading, and placement at site, complete in all respects as per manufacturer’s specifications and to the entire satisfaction and direction of the Engineer-in-Charge. Nos 1.0 0.0001088323 ELECTRICAL D CCTV: Supply & installation of CCTV all complete as per specification & approval of BHEL 0.0 D.1 Bullet Camera (2 MP, Night Vision, IR Range ≥ 30m, IP66, Metal Body, with mounting accessories, Power Adapter, and complete installation) Nos 10.0 0.0003177461 D.2 Bullet Camera (4 MP, Night Vision, IR Range ≥ 50m, IP66, Metal Body, with mounting accessories, Power Adapter, and complete installation) Nos 13.0 0.0006335701 D.3 Wiring with 3+1 CCTV Cable (Power + Video), laid and fixed to wall/ceiling using clamps, saddles, and casing capping as required, complete with terminations RM 950.0 0.0001983379 D.5 16 Channel DVR (H.265/H.264 compression, HDMI/VGA Output, 2 SATA up to 10TB, with power supply, complete installation, testing, and commissioning) Nos 2.0 0.0002809877 D.6 LED Display Monitor 32” (Full HD, wall/desk mount with HDMI cable, complete installation) Nos 2.0 0.0002542842 D.7 LED Display Monitor 42” (Full HD, wall/desk mount with HDMI cable, complete installation) Nos 2.0 0.0006866211 D.8 Desktop Computer (Core i5, 8GB RAM, 512GB SSD, Windows 11 Pro, 22” LED Monitor, Keyboard & Mouse, with installation & configuration for CCTV software) Set 2.0 0.0013838369 E ELECTRICALS AND ILLUMINATION WORK:Supply, fixing and commissioning of electrical works required for modular office, closed sheds and other areas all complete as per specfiifcation & approved drawings. Bidder to supply & install electrical items like Main Switch with earth leakage protection (30A TPN) suitable sockets/switch units for A/C points, wires, conduits, tees, bends, clamps, JBs, 5amps socket, Modular switch boards & points for computers & telephone for each table/desk, earthing wires etc. complete as per specifications / site requirement. Lighting system shall be designed to meet minimum 300Lux of modular type suitable for false ceilings (for office areas). Also, the bidder should take care of aesthetics and energy conservation. A detailed schematic with BOM (brands/ makes) of the electrical fittings shall be submitted for approval from BHEL. 0.0 E1 Supply, Installation and Commissioning of 415 volt AC , 3 phase /four wire power feeder pillar board , board shall be comprises of three number and one number aluminium bus bar for phase & neutral respectively. Bus bar rating shall be 200 Amps and shall be mounted on epoxy insulator of 1.1 kV grade, each bus bar shall have drilled hole for connecting incoming / out going cables, provision for earthing the panel enclosure. Panel enclosure shall be made of sheet metal thichnness not less than 1.6 mm and suitable for out door installation, hinged door with locking arragement, base frame, should have slopped canopy, duly painted with first coat with primer and two coats of synthetic enamel paint (interior with white paint and exterior with smoke grey as per IS), suitable stool made out of MS structure of 1.2 meter high for mounting of panel with anchoring arragement at foundation .Note: Suitable fondations to be prepared for mounting the Distribution Board. Civil Works related to construction of foundations shall be paid separately under relevant BOQ Items NOS. 1.0 0.0001471306 E1A Supply, installation, testing, and commissioning of an outdoor, floor-mounted on a rigid MS/ISMC structural steel fabrication stand (minimum 600mm ground clearance to facilitate easy bottom cable entry and bending radius), IP-55 weather-proof LTDB constructed from 2.0mm CRCA steel with a rain canopy, featuring a 400A 4-Pole changeover switch fed by two 400A TPN MCCB incomers (EB/DG) and supplying a 400A aluminium busbar system; outgoings shall comprise two 200A TPN MCCBs, two 100A TPN MCCBs, and two 63A TPN MCB+RCCB combinations (or RCBOs). Metering must include a digital multifunction meter (MFM) of Class 0.5S accuracy to measure V, I, Hz, PF, kW, kVA, and kWh, complete with suitably rated current transformers (CTs) and control fuses, a 0–500V voltmeter with VSS, and three phase-indication lamps. The enclosure must provide insulated neutral links, an earth bar, and a removable bottom gland plate with ample cable termination space an integrated cable support bracket/ladder frame within the stand structure to relieve stress on the gland plate.Note: BOQ rate inclusive of all Civil works for floor mounting.Payment: Supply-85% E&C-15% NOS. 1.0 0.0011109021 E1B Supply,Erection, testing, and commissioning of a 125A outdoor, IP-55 double-door Power Distribution Board (PDB), floor-mounted on a rigid MS/ISMC structural steel fabrication stand providing a minimum 600mm ground clearance with an integrated cable support bracket to relieve weight stress from the removable bottom gland plate. The system features a 125A TPN MCCB incomer feeding a suitable phase/neutral busbar system, which supplies outgoings consisting of two 63A TPN ELCBs/RCCBs, three 40A TPN RCCBs, and two 32A TPN RCCBs (all 30mA tripping) equipped with a timer and contactors for automatic on/off operation. System indication and metering shall comprise three phase-indicating lamps with control fuses, a 0–500V digital voltmeter with VSS, and a Class 0.5S digital multifunction meter (MFM) measuring V, I, Hz, PF, kW, kVA, and kWh, complete with suitably rated current transformers (CTs) and protection fuses. All MCCBs, MCBs, and RCCBs must be of a reputed make.Note: BOQ rate inclusive of all civil works for floor mounting.Payment: Supply-85% E&C-15% Nos. 1.0 0.001003896 E2B Supplying & installing power distribution board complete with:1) Incoming MCCB TPH 63 amps. - 1 no.2) RCCB DP 63 amps. - 3nos.3) Outgoing MCB (C-Curve )20 amp. -9 nos.4) Outgoing MCB (C-Curve )25 amp. -9 nos.Distribution boards shall with internal busbars, internal wiring, 2 nos. earthing terminals, earth connections, including glands and lugs. SET 1.0 0.0002920432 E2C Supplying & installing power distribution board complete with:1) Incoming MCCB TPH 63 amps. - 1 no.2) RCCB DP 63 amps. - 3nos.3) Outgoing MCB (C-Curve )16 amp. -30 nos.Distribution boards shall with internal busbars, internal wiring, 2 nos. earthing terminals, earth connections, including glands and lugs. 1.0 0.0002920432 E2D Supplying & installing power distribution board complete with:1) Incoming MCCB TPH 32 amps. - 2 no.3) Outgoing MCB (C-Curve )10 amp. -15 nos.4) Outgoing MCB (C-Curve )16 amp. -5 nos.Distribution boards shall with internal busbars, internal wiring, 2 nos. earthing terminals, earth connections, including glands and lugs. 1.0 0.0002920432 E3 Supply and Installation of earth electrode 40 mm dia 3 metre long GI pipe directly driven into earth including earth excavation if required. Nos 11.0 0.0003810765 E4 Supplying & installation of SWG GI wire for earthing including supply & termination with lugs 0.0 a) Supplying & installation of 16 SWG GI wire for earthing including supply & termination with lugs as required. RM 80.0 1.12373e-05 b) Supplying & installation of 8 SWG GI wire for earthing including supply & termination with lugs as required. RM 85.0 1.13122e-05 c) Supplying & installation of 25X3 GI Earth Flat for earthing including supply & termination with lugs as required. RM 50.0 0.0001107307 d) Supplying & installation of 50X6 GI Earth Flat for earthing including supply & termination with lugs as required. RM 50.0 0.0001772731 E6 Supply & fixing of sheet metal (16SWG) iron clad busbar chamber (W=500mm x D=150mm) on angle iron frame duly painted on wall with 4 Al bars (25mm x 5mm x 600mm) 500V, with adequate nos of holes drilled for connection of incomimg & outgoing ckts, bars are fixed on porcelain insulators. Including supply of required hardwares for connection, fitted with DANGER board, all complete as per instruction of BHEL Engineer. Nos 4.0 0.0001744866 E7 Supply & fixing of metal sheet MCB BOX, as per instruction of BHEL Engineer - 0.0 a) 4 Way Nos 11.0 0.000101661 b) 6 way Nos 1.0 2.66166e-05 c) 8 way Nos 1.0 3.10527e-05 d) 12 way Nos 1.0 4.36217e-05 E8 Supply & fixing of Metal Junction Box with connector Lugs, as per instruction of BHEL Engineer - 0.0 a) Size ( 8''X10''X3'') to terminate 10 sqmm cable and 4/2.5 sqmm cable Nos 9.0 0.000199624 b) Size ( 8''X6''X3'') to terminate 10 sqmm cable and 2.5 sqmm cable/1sqmm cable Nos 9.0 0.0001863158 E9 Supply & fixing of composite flush/box mounted type 250 volt 6 Pin 15 Amps Plug socket integral fuse, with single phase motor starter with overload protection, on sheet metal box with bakelite cover and earthing attachement including Switch and Fuse of matching PVC box-make ANCHOR or approved make (Pantry/Kitchen/AC), as per instruction of BHEL Engineer. Nos 4.0 4.73183e-05 E10 Supply & fixing composite flush type 250 volt 5 Pin 5Amps Plug socket integral fuse with 5 Amps piano key type switch on sheet metal box with bakelite cover and earthing attachement including Switch and Fuse of matching PVC box-make ANCHOR /or approved make ( for Computers /printers), as per instruction of BHEL Engineer. Nos 158.0 0.0014018043 E11 Providing and installing 62.5 KVA Diesel Power Generator, as per specification suitable for Office Purpose. NOS. 1.0 0.0056416745 E12 Supply and installation of switchboard of sheetmetal box with bakelite cover, as per instruction of BHEL Engineer - 0.0 a) Size 4\\"X8\\" Nos 1.0 5.2567e-06 b) Size 4\\"X10\\" Nos 1.0 5.8409e-06 c) Size 4\\"X4\\" Nos 1.0 4.7318e-06 d) Size 10\\"X12\\" Nos 1.0 7.5931e-06 E12A Supply and installation of switchboard of sheetmetal box with bakelite Modular switch boards, as per instruction of BHEL Engineer - 0.0 a) 6 Module Nos 22.0 0.0001156484 b) 8Module Nos 9.0 5.25678e-05 c) 4 Module Nos 29.0 0.0001372218 d) 12 Module Nos 20.0 0.0001518622 E13 Supply and Installation of SP MCB for lighting / Power purpose- 0.0 a) 16 Amps Nos 19.0 8.9904e-05 b) 6 Amps Nos 8.0 3.25317e-05 c) 25A/32 Amps Nos 3.0 1.95189e-05 E14.1 1.1 KV grade LT PVC 3.5Cx95 sqmm Al Armoured Cable 0.0 a) Supply of 1.1 KV grade LT PVC 3.5Cx95 sqmm Al Armoured Cable RM 500.0 0.0019177723 b) Laying below ground in excavated trench average depth 800 mm with 8 nos of brick on top of the cable per meter including filling the space between brick & cable and also the trench with shifted soil levelling and restoring the surface duly rammed & compacted, as per instruction of BHEL Engineer. RM 400.0 0.0021280671 c) Laying of cable either on wall through fixing by clamping or hanging on temporary pipe supports at some suitable intenval of cable route. Height of cable to be maintained for hinderance free movement of people on work. RM 50.0 4.57791e-05 d) End termination ( both side) including supply of glands & lugs Nos 4.0 6.315e-05 E14.2 3.5 core 25 sqmm PVC, armoured Aluminium cable of 1.1 KV grade as per IS-1554 & laying. 0.0 a) Supply & laying of of 3.5 core 25 sqmm PVC, armoured Aluminium cable of 1.1 KV grade as per IS-1554. RM 510.0 0.0008203117 b) Laying below ground in excaveted trench average depth 800 mm with 8 nos of brick on top of the cable per meter including filling the space between brick & cable and also the trench with shifted soil levelling and restoring the surface duly rammed & compacted, as per instruction of BHEL Engineer. RM 425.0 0.0021979704 c) Laying of cable either on wall through fixing by clamping or hanging on temporary pipe supports at some suitable intenval of cable route / through High Mast Pole RM 85.0 6.31009e-05 d) End termination ( both side) including supply of glands & lugs Nos 9.0 8.57411e-05 E14.3 1.1 KV grade LT PVC 4Cx10 sqmm Al Armoured Cable 0.0 a) Supply of 1.1 kV LT PVC 4Cx10 sqmm Al Armoured Cable . RM 1950.0 0.0024126813 b) Laying of cable either on wall through fixing by clamping or hanging on temporary pipe supports at some suitable interval of cable route RM 200.0 0.0001484727 c) End termination ( both side) including supply of glands & lugs Nos 47.0 0.0003779867 d) Laying below ground in excaveted trench average depth 800 mm with 8 nos of brick on top of the cable per meter including filling the space between brick & cable and also the trench with shifted soil levelling and restoring the surface duly rammed & compacted, as per instruction of BHEL Engineer. RM 1400.0 0.0057922984 E15 Supply, drawing through PVC conduit/casing, termination, testing & commissioning as wiring for lighting, power & earthing circuits: 0.0 a) 1 core 6 sqmm PVC insulated, stranded Copper wire of 1.1 KV grade RM 240.0 0.0001597017 b) 1 core 4 sqmm PVC insulated, stranded Copper wire of 1.1 KV grade RM 1790.0 0.0010719978 c) 1 core 2.5 sqmm PVC insulated, stranded Copper wire of 1.1 KV grade RM 4552.0 0.0013696802 d) 1 core 1.5/1 sqmm PVC insulated, stranded Copper wire of 1.1 KV grade RM 5074.0 0.0013880407 e) 1 core 1 sqmm PVC insulated, Green stranded Copper wire for earthing of inside building RM 3053.0 0.0006545365 E16 Supply and fixing of PVC conduit with all bends, tees, reducers, rectangular/circular box, clamps, saddles, etc. along with the accessories in surface/ recess in beam/ roof slab/ wall/ false ceilling and making good the same as required, as per instruction of BHEL Engineer. 0.0 a) 1\\" dia rigid RM 2756.0 0.0030566091 b) 1\\" dia flexible RM 395.0 0.000379643 c) 1.5\\" dia rigid RM 1515.0 0.0025203716 d) 1.5\\" dia flexible RM 303.0 0.0004368298 E17 Supply and fixing of PVC casing with all bends, tees, reducers, rectangular/circular box, clamps, saddles, etc. along with the accessories in surface/ recess in beam/ roof slab/ wall/ false ceilling and making good the same as required, as per instruction of BHEL Engineer. 0.0 a) 1.5\\" dia RM 178.0 0.0002290439 b) 1\\" dia RM 58.0 5.74094e-05 c) 0.5\\" dia RM 58.0 3.58809e-05 E18 Supply & fixing of ceiling rose on circular boxes, as per instruction of BHEL Engineer Nos 34.0 2.26244e-05 E19 Supply of outdoor luminaires ( IP 65/IP 66) suitable for mounting on 40mm dia swan neck GI pipe and suitable for 1x150 W LED lamps in cast aluminium body with water proof toughened glass cover along with lamps, control gear, etc including internal wiring, fixing/ supporting accessories complete Nos 73.0 0.0037780773 E20 Supply & Fixing on wall 40 mm dia swan neck GI pipe with suitable clamps etc Including all fixing/ supporting accessories complete and flexible wire for connection between ceiling rose & fitting & commissining of outdoor luminaires ( IP 65/IP 66) suitable for 1x150 W LED lamps in cast aluminium body with water proof toughened glass cover along with lamps, control gear, etc including internal wiring, fixing/ supporting accessories complete. Nos 73.0 0.0005936967 E22 100 watt LED light with hanging arrangement all complete. NOS. 126.0 0.002785422 E23 Supply & Installation of Exhaust Fan of different Sweep mentioned below (Crompton Greves or Equivalent make) 0.0 a) 300 mm Nos 13.0 0.0004421316 b) 450 mm Nos 3.0 0.0001326395 c) 600 mm Nos 3.0 0.0002652786 E24 Supply of local make approved quality Pedestal fan - 16\\" sweep.(On requirment Basis after getting approvals from BHEL) Nos 4.0 0.000162657 E25 Supply & installation of Ceiling Fan 48'' sweep of Havells/Crompton or equivalent(On requirment Basis after getting approvals from BHEL) Nos 6.0 0.0001464197 E26 Supply & installation of Wall mounted fan 400mm sweep Nos 24.0 0.0007097768 E27 Supply and installation of 3.5C X2.5sqmm armoured Cu cable RM 404.0 0.0005944111 E29 Supply & installation of 15/ 16 A piano type switch. Nos 41.0 5.45648e-05 E30 Supply & installation of 15/ 16 A flush type power socket. Nos 41.0 6.66884e-05 E31 Supply & installation of 5/ 6 A piano type switch. Nos 362.0 0.0002149885 E32 Supply & installation of 5/ 6 A flush type power socket. Nos 84.0 8.10661e-05 E33 Supply & fixing of composite type single phase air conditioning machine starter( Havelles/Crabtree/Anchor or equivalent) with Pin socket and plug top fitted on suitable sized PVC box. 0.0 a) For rating of 15 A application Nos 12.0 9.7594e-05 b) For rating of 25 A application Nos 7.0 9.83333e-05 E34 Supply and fixing two module stepped type electronic fan regulator on the existing modular plate switch box inclusinf connections but excluding modular pl;ate etc. as required Nos 6.0 1.92578e-05 E35 Supply and delivery of Electric Kettle of high-quality, durable design, suitable for office or domestic use. The kettle shall have a minimum capacity of 1.5 liters, a power rating of 1500–2000 Watts, and shall operate on 230V ±10%, 50Hz AC single-phase supply. The body shall be made of stainless steel or heat-resistant food-grade plastic, complete with an automatic cut-off feature for boil-dry protection, a detachable base, and an indicator light. The kettle shall conform to relevant IS/IEC safety standards and shall be supplied with manufacturer’s warranty and all necessary accessories. Nos 2.0 2.60948e-05 E36 Supplying and fixing piano type bell push switch on the existing switch box/cover including connections etc. as required Nos 2.0 4.4361e-06 E37 Supplying and fixing following double pole, (single phase and nuetral), 240 v, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commisioning etc. as required 0.0 a) 40A DP AC RCCB,30mA Nos 1.0 3.17921e-05 b) 63A DP AC RCCB,30mA Nos 1.0 4.28823e-05 E38 Supplying and fixing call bell/buzzer suitable for single phase, 230 V, complete as required Nos 2.0 7.3935e-06 E39 Supplying and fixing of LED Bulbs/Batterns 0.0 a) 20w led battern 230v, energy-efficient type, complete with all necessary accessories such as holder clips, connection leads, and mounting arrangements Nos 23.0 0.0001167489 b) 40w led battern 230v, energy-efficient type, complete with all necessary accessories such as holder clips, connection leads, and mounting arrangements Nos 38.0 0.0002702018 c) 9 Watt (9W) LED bulb, energy-efficient type, complete with all necessary accessories such as lamp holder, connection leads, and mounting arrangements Nos 10.0 7.0192e-06 d) 12 Watt (12W) LED bulb, energy-efficient type, complete with all necessary accessories such as lamp holder, connection leads, and mounting arrangements Nos 15.0 1.3885e-05 e) 20 Watt (20W) LED bulb, energy-efficient type, complete with all necessary accessories such as lamp holder, connection leads, and mounting arrangements Nos 87.0 0.000220369 E40 Supply and installation of Philips/Havells/Equivalent make 32 watt /40 watt LED 2x2 LED light fittings of minimum 1 year gaurantee with accessories including testing and commissioning of pre-wired, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. Nos 66.0 0.0015404916 E41 Supply and installation of AC machines at BHEL site office, including supply of relevant electrical fittings and fixtures, and commissioning upon installation, etc complete. 0.0 a) Supply and Installation of 1.5 Ton 5 Star , 5 Years Comprehensive Warranty, Split AC (LG/Samsung/Voltas/Godrej or Equivalent ) (Copper, Heavy Duty Cooling, Latest Model,as per instruction of Engineer-In-Charge Nos 12.0 0.0040812113 b) Supply and Installation of 2.0 Ton 5 Star , 5 Years Comprehensive Warranty, Split AC (LG/Samsung/Voltas/Godrej or Equivalent ) (Copper, Heavy Duty Cooling , Latest Model,as per instruction of Engineer-In-Charge Nos 7.0 0.0026187774 EAL-1 Supply & Installation of steel tubular swaged poles, 9 mtr long made of sheet steel having ultimate tensile strength 42 kg F/sq. mm conforming to BIS: 2713 (part-II) complete with 300x300x6 mm thick MS base plate for welding at site and size as per configuration given in BIS for 410 SP-28 (113 kg- pole weight) with 1.5 mtr deep exacavation, concreting in 1:4:8 ratio size 45 cms x 45 cms x 150 cms and pole plinth in 1:3:6 cement concreting having 300 mm height and 300 mm dia (Civil works inclusive not separtely payable) including double earthing of pole with suitable arrangement of by 25x3mm GI Flat bonded to 25 mm dia GI earth electrode of 3-meter length driven vertically in the ground (BOQ inclusive of price for one number 25mm Gi Earth electrode per pole) , duly painted with two coats of red oxide paint and one coat of aluminium paint to be applied after erection; the Length of pole below ground to be painted with two coats of black bituminus paint. the pole shall be complete with JB, fuse and minor fabrication as below :i) Driling Nos. 20 mm dia hole at about 2.5 mtr from ground level for wire leads from junction box to light fixture.ii) Driling 15mm dia holes at about 0.7 and at 2.5 mtr from ground level and welding 12 mm nuts for using a 12 mm GI bolt for fastening earth conductors.iii) Welding required holes for fixing pole cap of street light bracket.iv) Welding diametrally 10 mm MS round 30 mm below pole top edge for clipping wire leads. (v) Supply and fabrication of a double-arm outreach bracket (1.5-meter length per arm) specifically configured with provisions for mounting two Nos. 150-Watt light fixtures.Payment: Supply-70% E&C-30% Nos 40.0 0.0074356353 EAL-2 Supply and Installation of Electrical junction box (GI/PVC)of good quality to suit the opening availabe in above lighting pole, one connector block for 3 Phase 4 wire incoming and outgoing cable to next street light pole with 01 no. 6A SP MCB(C curve) for street light and earthing etc.Payment: Supply-85% E&C-15% No 40.0 0.0008887225 EAL-3 Supply and Installation of 150 W LED Flood light fitting of make Philips/CGL/Bajaj/Havells/Wipro only.Payment: Supply-75% E&C-25% No 80.0 0.0045976543 EAL-4 Supply & Installation of 50mm NB 3.6mm thick medium class standard GI pipe with 7 Mtr length for incoming and outgoing cables.Payment: Supply-80% E&C-20% No 80.0 0.0006517374 EAL-5 Supply & Installation of out door type metal clad Lighting distribution board (LDB) having IP-55 protection with double door type and one incomer with 100A TPN MCCB additionally with 5 nos. 32 A TPN RCCBs with 30mA tripping and timer & contactors for auto on/off street lights and 3 indicating lamps with fuse for indication bus supply ON, Digital Voltmeter & VSS 0-500V etc. Suitable bulbar arrangement for Phase and Neutral. Sufficient space should be provided in the removable cable gland plate to accommodate incoming power cable and all outgoing cables. Payment: Supply-80% E&C-20% No 2.0 0.0017033819 N Networking: Supply & installation of networking works required for modular office all complete as per specification & approved drawing 0.0 N-1 Supply, delivery, and installation of wall-mounted 9U Rack, powder-coated MS steel with lockable doors, ventilation, and cable management. NOS. 1.0 6.17023e-05 N-2 Supply, delivery, and installation of 24 Port Jack Panel with I/O, compatible with CAT6 cabling. Includes labeling and mounting. NOS. 1.0 5.50843e-05 N-3 Supply, delivery, and installation of 7 ft Patch Cord, CAT-6 compliant, with RJ45 connectors. NOS. 50.0 0.0001537337 N-4 Supply, delivery, and installation of 28 Port Gigabit Layer 2 Managed Switch, reputed make, BHEL approved, with 3 years OEM warranty. NOS. 2.0 0.0005492953 N-5 Supply, delivery, and installation of RJ45 CAT6E LAN Keystone Jack + Gang Box + Single Port Faceplate. NOS. 10.0 2.94897e-05 N-6 Supply, delivery, and installation of 3 ft Mounting Cord, CAT-6 standard, with RJ45 connectors. NOS. 50.0 0.0001334123 N-7 Supply, delivery, and installation of RJ45 Connectors suitable for CAT5E/CAT6 cables. NOS. 100.0 6.4463e-06 N-8 Supply, delivery, and installation of CAT 5E UTP Cable, solid copper, laid as per specs. RM 305.0 0.000130525 N-9 Supply, delivery, and installation of WiFi Access Point (802.11n) with mounting and configuration. NOS. 4.0 0.0007119944 N-10 Supply, delivery, and installation of 10 KVA UPS with 60 min backup, SMF batteries, 3 years warranty including one-time battery replacement. NOS. 1.0 0.0018485487 TOTAL PACKAGE-B 0.5362428075 GRAND TOTAL = PACKAGE-A + PACAKAGE-B 1.0 Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58219048
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE Ref. Documents
LAST DATE 05-11-2026
Authority
Authority Name Bharat Heavy Electricals Limited
Work Description Tender for Civil & Architectural Works Including Design (Wherever Applicable), Manufacturing, Supply, Receipt At Site, Erection, Internal Electrification, Painting & Finishing Works Etc. And Handing Over To Site Of Site Office (Approx. Size 400 Sqm) With Parking Lots, Steel Closed/Covered Storage Sheds (7 Nos. Approx. Area 6300 Sqm), Supply And Installation Of Portable Cabins, Development Of Open Storage Yard With Internal Roads And Drains, Concrete Raised Platform, Hard Crusting, Supply Of Precast Concrete Sleepers, Fencing And Gate For Storage Yard And Bhel Office Area, Fencing Of Boundary, Miscellaneous Equipment Foundations, Watch Tower/ Security Cabins, Construction Water Distribution Network Including Overhead Tanks, Storage Yard Area Lighting Etc. At 12X240 Mw Dibang Multipurpose Project, Roing, Arunachal Pradesh. Package A: Immovable Items, Package B: Movable Items
Basic Detail
Tender No PSER-SCT-DMP-C2445-26-11802
Bidding Type Tender
Location
City Lower Dibang Valley
State Arunachal Pradesh
Key Dates
Publish Date 26 Oct 2026
Submission Date 05 Nov 2026
Open Date 05 Nov 2026
Finance
Tender Value Ref. Documents
Tender Fee Ref. Documents
EMD 5 Lakhs
Exemption Not Available
Document List
BOQ_71895.xls
dd97b1d8-5f5e-4441-88bb-947f36e6e6c3.html
TENDERDOCSP1.rar
TENDERDOCSP2.rar
TENDERDOCSP3.rar
TENDERDOCSP4.rar
Tendernotice_1.pdf
AI-generated summary — verify details from the official tender portal before submission.

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Oct 26, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 05, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 3 days
Nov 05, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 3 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_71895.xls

html

dd97b1d8-5f5e-4441-88bb-947f36e6e6c3.html

rar

TENDERDOCSP1.rar

rar

TENDERDOCSP2.rar

rar

TENDERDOCSP3.rar

rar

TENDERDOCSP4.rar

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender