Tender For Repair Of Toilet Block At Old Bus-Stand W.No. 5 Nagar Panchayat Kunihar.
Tender Value
4.05 Lakhs
Estimated cost
Bid Submission
02 Nov 2026
1 days left
EMD
10000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Solan → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair Of Toilet Block At Old Bus-Stand W.No. 5 Nagar Panchayat Kunihar.
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing cement concrete manually-by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:4:8 or leaner mix (i-c equivalent design mix) |
| 2 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area 3 sq. metres and below |
| 3 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm |
| 4 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 cement : 5 coarse sand): 10 graded stone aggregate 40 mm nominal size) |
| 6 | Smooth finishing of the exposed surface of R.C.C. work with 6 mm thick cement mortar 1:3 (1 Cement : 3 fine sand). |
| 7 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand) |
| 8 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours,shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cementmortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointingin white cement mixed with pigment of matching shade complete. |
| 9 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys,complete with bolts, nuts, locking arrangement,stoppers, handles, including applying a priming coat of approved steel primer. |
| 10 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approvedsteel primer. Using flats 30x6mm for diagonal braces and central cross piece |
| 11 | Providing and fixing angle iron frames for doors,windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron35x35x5 mm or 35x 5 mm flat pieces to the existing Tironframe or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applyinga priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge. |
| 12 | Providing and laying Ceramic glazed floor tiles of size300x300 mm (thickness to be specified by themanufacturer) of 1st quality conforming to IS : 15622 ofapproved make in colours such as White, Ivory, Grey,Fume Red Brown, laid on 20 mm thick cement mortar1:4 (1 Cement : 4 Coarse sand), Jointing with greycement slurry @ 3.3 kg/sqm including pointing the jointswith white cement and matching pigment etc., complete. |
| 13 | 12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) |
| 14 | White washing with lime to give an even shade : New work (three or more coats) |
| 15 | Finishing walls with water proofing cement paint ofrequired shade : New work (Two or more coats applied @3.84 kg/10 sqm) |
| 16 | Painting with synthetic enamel paint of approvedbrand and manufacture of required colour to give aneven shade : Two or more coats on new work over anunder coat of suitable shade with ordinary paint of approved brand and manufacture |
| 17 | Providing and fixing water closet squatting pan (Indiantype W.C. pan ) with 100 mm sand cast Iron P or S trap,10 litre low level white P.V.C. flushing cistern, includingflush pipe, with manually controlled device (handle lever)conforming to IS : 7231, with all fittings and fixturescomplete, including cutting and making good the wallsand floors wherever required: White Vitreous china Orissa pattern W.C.pan of size 580x440 mm with integral typefoot rest. |
| 18 | Providing and fixing white vitreous china pedestal typewater closet (European type W.C. pan) with seat and lid,10 litre low level white P.V.C. flushing cistern, includingflush pipe, with manually controlled device (handlelever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good thewalls and floors wherever required : W.C. pan with ISI marked white solid plasticseat and lid. |
| 19 | Providing and fixing white vitreous china flat back halfstall urinal of size 80x380x350 mm with white PVCautomatic flushing cistern, with fittings, standard sizeC.P. brass flush pipe, spreaders with unions and clamps(all in C.P. brass) with waste fitting as per IS : 2556, C.I.trap with outlet grating and other couplings in C.P. brass,including painting of fittings and cutting and makinggood the walls and floors wherever required : Range of three half stall urinals with 10 litreP.V.C. automatic flushing cistern . |
| 20 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste ofstandard pattern, including painting of fittings andbrackets, cutting and making good the walls whereverrequire: White Vitreous China Wash basin size630x450 mm with a single 15 mm C.P.brass pillar tap |
| 21 | Providing and fixing white vitreous china pedestal forwash basin completely recessed at the back for thereception of pipes and fittings. |
| 22 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexibletube upto 1 metre long with S.S. triangular plate toEureopean type W.C. of quality and make as approvedby Engineer - in - charge. |
| 23 | Providing and fixing P.V.C. waste pipe for sink or washbasin including P.V.C. waste fittings complete. Flexible pipe 32 mm dia |
| 24 | Providing and fixing water closet squatting pan (Indiansuperior glass (of approved quality) complete with 6 mmthick hard board ground fixed to wooden cleats with C.P.brass screws and washers complete. |
| 25 | Providing and fixing soil, waste and vent pipes : 100 mm dia Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 |
| 26 | Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes : 100 mm dia pipe |
| 27 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nutscomplete. 100 mm dia Sand cast iron S&S as per IS - 3989 |
| 28 | Providing and fixing single equal plain junction of required degree : 100x100x100 mm Sand cast iron S&S as per IS - 3989 |
| 29 | Providing and fixing collar : 100 mm Sand cast iron S&S as per IS - 3989 |
| 30 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 100 mm outlet Sand Cast Iron S&S as per IS: 1729 |
| 31 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. 15 mm dia nominal bore |
| 32 | Providing and fixing brass bib cock of approved quality : 15 mm nominal bore each |
| 33 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 15 mm nominal bore |
| 34 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and makingnecessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 35 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore |
| 36 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) :3 graded stone aggregate 20 mm nominal size),foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominalsize), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coatof neat cement and making channels in cement concrete1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floatingcoat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg andweight of frame 15 kg) : With common burnt clay F.P.S. (nonmodular) bricks of class designation 7.5 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayNov 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender