Tender For Repair/ Manit Of Lightening Conductor And Connected Items Under Ge (East) Ferozepur Cantt
Tender Value
16 Lakhs
Estimated cost
Bid Submission
16 Nov 2026
15 days left
EMD
32000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Firozepur → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Manit Of Lightening Conductor And Connected Items Under Ge (East) Ferozepur Cantt
BOQ
| Sl. No. | Item Description |
| 1 | Fixing in repair of existing aluminium strip of any size as per ground with saddles and fixings screws etc for roof conductors and down conductors above ground, complete all as specified and directed |
| 2 | M&L of aluminium strip 25mm x 3.15 mm with saddles and fixings screws etc for roof conductors and down conductors above ground complete all as specified and directed |
| 3 | Fixing in repair of existing GI strip of any size as per ground with saddles and fixings screws etc for roof conductors and down conductors above ground, complete all as specified and directed |
| 4 | M & L of GI strip of size upto 32mm x 6 mm with saddles and fixings screws etc for roof conductors and down conductors above ground complete all as specified and directed |
| 5 | M& L for Air termination,Single pointed aluminium rod 12mm dia and 300 mm long with base plate welded at bottom of termination rod 10 cm long fabricated out of 25 x 3 mm thick flat iron along with 9 mm dia fixing fasteners (wooden block) complete all as specified and directed . |
| 6 | Fixing In repair of Air termination,Single pointed aluminium rod of any size as per ground with base plate welded at bottom of termination rod 10 cm long fabricated out of 25 x 3 mm thick flat iron along with 9 mm dia fixing fasteners (wooden block) complete all as specified and directed |
| 7 | S & F GI tube light grade of 40 mm dia bore galvanised,,with all fitting and fixed complete to walls and ceilings or laid in floors as directed and specified by Engr-in-charge . |
| 8 | M& L for test point terminal block made out of gun metal or phosphorus bronze size 75x 75x25mm drilled and screwed including 3 Nos 8 mm dia 25 mm long hex head screw complete all as specified and directed |
| 9 | Material and Labour PCC (1:2:4) type B-2 using 20mm graded stone aggregate as in foundation of size 300x300x300mm for Aluminium termination rod, complete all as specified and directed. |
| 10 | Fixing in repair of test point terminal block of any type as per existing at site complete all as specified and directed |
| 11 | Supply and Fixing in repair of Earthing complete, all as shown on electrical plate No 3 of MES schedule part-I , as specified including the following :- (i) Galvanised steel earth plate of size 60cmsx60cmsx6mm thick burried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of earth plate at a depth not less than 1.50 metre below normal ground level. (ii) Earth plate surrounded by and packed with char-coal and common salt in alternative layers (n.exc 15cms each layer). (iii) 4 mm dia (8 SWG) G.I earth wire from earth plate to main switch board including necessary GI bolts, nuts check nuts, washers, thimbles etc. (iv) 15 mm bore light grade, GI pipe for protection to earth-wire. (v) 20mm bore, medium grade, GI pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horizontally to the earth pit. (vi) 50mm thick pre-cast cover of cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate,Chamber in PCC(1:3:6), type-C2 (to be constructed 1 m away from edge of earth pit) including two coats of painting over a coat of red oxide to exposed steel surfaces. (vii) Excavation in soft/loose soil, returning filling & removal of surplus soil to a distance upto 50 metre as directed including testing etc, complete all as specified and directed. |
| 12 | Supply and Fixing in Repair of Earthing complete with GI earth plate electrode 600 mm x 600mm x 6.3 mm thick burried directly in ground vertically to a depth not less than 2.25 m below ground level with the top edge of earth plate at depth not less than 1.5 m below ground level connected to galvanised iron strip 32 x 6 mm earthing lead by means of bolts, nuts, check nuts and washers protected by 40 mm bore light grade GI pipe, funnel with 20mm bore GI medium grade pipe for watering, wire mesh, including concrete pit in PCC (1:3:6) type C-1, pre-cast RCC 1:2:4 type B-1 cover slab of size 350x350x50mm reinforced with 8mm dia TMT steel bars @15cm centre to centre both direction and handle of suitable size, charcoal or coke and salt in alternative layers, necessary excavation & earth work in soft/loose soil all as shown in Electrical Plate No 3 of MES Schedule Part I and testing complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 13 | Supply and Fixing in Repair of Earthing complete with GI earth plate electrode 600 mm x 600mm x 6.3 mm thick burried directly in ground vertically to a depth not less than 2.25 m below ground level with the top edge of earth plate at depth not less than 1.5 m below ground level connected to galvanised iron strip 32 x 6 mm earthing lead by means of bolts, nuts, check nuts and washers protected by 40 mm bore light grade GI pipe, funnel with 20mm bore GI medium grade pipe for watering, wire mesh, including concrete pit in PCC (1:3:6) type C-1, pre-cast RCC 1:2:4 type B-1 cover slab of size 350x350x50mm reinforced with 8mm dia TMT steel bars @15cm centre to centre both direction and handle of suitable size, charcoal or coke and salt in alternative layers, necessary excavation & earth work in soft/loose soil all as shown in Electrical Plate No 3 of MES Schedule Part I and testing complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 26, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysNov 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender