Tender For Special Repair To Building No P-33 (01 To 08) At Khetarpal Lines In Miran Sahib Under Ge Jammu.
Tender Value
48.56 Lakhs
Estimated cost
Bid Submission
16 Nov 2026
15 days left
EMD
97120
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Building No P-33 (01 To 08) At Khetarpal Lines In Miran Sahib Under Ge Jammu.
BOQ
| Sl. No. | Item Description |
| 1 | B/R Portion: -Taking down chowkhats or frames not exceeding 1.5 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and as directed. |
| 2 | Taking down chowkhats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and as directed. |
| 3 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 4 | 15 mm thick rendering in cement mortar (1:6) on other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 5 | 5mm thick rendering in cement mortar (1:3) on ceiling surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 6 | Rendering 15mm thick on fair faces of brick/ concrete surfaces built in cement mortar (1:4), finished even and smooth with WPC without using extra cement complete all as specified and as directed.Note: - WPC shall be measured and paid separately in respective item. |
| 7 | Preparation of surface and applying three coats of white wash on newly plastered surface of ceiling complete all as specified and as directed. |
| 8 | Preparation of old plaster or painted surfaces of ceiling and applying two coats of white wash complete all as specified and as directed. |
| 9 | Preparation of new surface and applying two coats of oil bound distemper over a coat of primer over new plaster surface over 1 mm thick wall care putty complete all as specified and as directed. |
| 10 | Complete removal of existing surface and preparation of old surface and applying two coats of oil bound distemper over a coat of primer over 1 mm thick wall care putty complete all as specified and as directed. |
| 11 | Applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali and fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm over new surfaces over a coat of 1 mm thick wall care putty complete all as specified and as directed. |
| 12 | Complete removal of existing surface and preparation of old surface applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali and fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm over old surfaces over a coat of 1 mm thick wall care putty complete all as specified and as directed. |
| 13 | Applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali and fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm over new surfaces complete all as specified and as directed. |
| 14 | Rendering 20mm thick in cement mortar (1:4) on concrete surface such as chajjas, upward fascias, roof surfaces and similar items including two or more dubbing coat, surface finished even and fair without using extra cement including mixing of liquid water proofing compound (LWPC shall be measured and will be paid separately in respective item) upto height of four storeyed building with all necessary formwork, scaffolding, lifting arrangement for external surface upto 4 storey buildings complete all as specified and as directed by Engineer-in-Charge. |
| 15 | Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster (1:4) (1 cement : 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster (1:½:2) (1 cement: ½ coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified and as directed. |
| 16 | 75mm thick cement concrete (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) as in floor/plinth protection laid in suitable panels finished even and fair all as specified. 6mm joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 85/25 or 80/100 gde and three part of sand (all by weight) complete all as specified and as directed. |
| 17 | 30mm thick second class hardwood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkhats complete all as specified and as directed. |
| 18 | 35mm thick second class hard wood factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part - I, Section 8, clause 8.20 (a) complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 19 | 35mm thick second class hard wood factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part - I, Section 8, clause 8.20 (a) complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 26, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysNov 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender